TECLUNG ATX Metal Detector User Manual

1. Увод

Thank you for choosing the TECLUNG ATX Metal Detector. This professional-grade metal detector is designed for treasure hunting, coin shooting, and relic recovery, offering high accuracy and a user-friendly experience. Featuring an advanced LCD display, a 15-inch waterproof search coil, and multiple detection modes, the ATX model provides reliable performance in various environments. Please read this manual thoroughly before operating your device to ensure proper assembly, optimal performance, and safe use.

2. Производ је готовview и компоненте

Familiarize yourself with the main components of your TECLUNG ATX Metal Detector:

Слика 2.1: Готовоview of the TECLUNG ATX Metal Detector with key components labeled.

• калем за претрагу: The primary detection component, 15 inches in diameter and waterproof.
• Контролна кутија: Houses the LCD display, control buttons, and electronic circuitry.
• ЛЦД екран: Displays target information, detection modes, sensitivity, and battery status.
• стабљика: Adjustable shaft connecting the search coil to the control box and armrest.
• Stem Lock Nuts: Secure the adjustable sections of the stem.
• Ergonomic Armrest: Provides comfort and stability during operation.

3. Подешавање и монтажа

Пратите ове кораке да бисте саставили свој детектор метала:

1. Причврстите трагачку завојницу: Connect the 15-inch search coil to the lower stem using the provided bolt and nut. Ensure it is securely fastened but allows for slight angle adjustment.
2. Саставите стабљику: Connect the middle stem to the lower stem, and then the upper stem (with the control box and armrest) to the middle stem. Use the stem lock nuts to secure each section.
3. Подесите дужину: Adjust the length of the stem to a comfortable position that allows the search coil to be parallel to the ground when you are standing upright. Tighten the stem lock nuts to prevent wobbling.
4. Подесите наслон за руке: Position the ergonomic armrest for comfortable support.
5. Укључено: Ensure the device is powered. The ATX model is battery-powered. Refer to the battery compartment for specific battery type and installation if required (typically located on the control box).

4. Радни режими

The TECLUNG ATX Metal Detector features three primary operating modes to suit various detection needs:

Image 4.1: Visual representation of the three main detection modes.

• All Metal Mode:
  This mode detects all types of metal objects without discrimination. It is ideal for general searching when you want to find any metallic item, or when you are unsure of the target type. In this mode, the detector will notify you of every metal it encounters.
• Discrimination (DISC) Mode:
  The DISC mode allows you to eliminate unwanted metal targets, such as iron or other junk metals. This helps focus your search on more valuable items like coins, gold, or silver. You can adjust the discrimination level to ignore specific types of metals.
• Pinpoint (PP) Mode:
  Once a target is detected in All Metal or DISC mode, switch to Pinpoint mode to accurately locate the exact position of the object. This mode helps narrow down the target area, making recovery easier and more precise.

5. Basic Operation and LCD Display

Understanding the control box and LCD display is crucial for effective operation.

Слика 5.1: Детаљно view of the LCD display and control buttons.

• Укључивање/искључивање: Use the designated power button (often labeled 'POWER') to turn the detector on or off.
• Target DIS Scale: The scale at the top of the LCD indicates the probable type of metal detected. Different segments light up for different metal categories.
• Target Object Data: Numerical values displayed on the screen provide more specific information about the detected target, aiding in identification.
• Gain (Sensitivity) Adjustment: Use the 'GAIN' control to adjust the detector's sensitivity. Higher sensitivity increases detection depth but may also increase false signals. Adjust as needed for your environment.
• Избор режима: Use the 'MODE' button or dial to switch between All Metal, DISC, and Pinpoint modes.
• Баланс тла: The 'GROUND BALANCE' feature helps the detector ignore ground mineralization, which can cause false signals. Refer to the specific instructions for your model on how to perform ground balancing for optimal performance.
• Техника чишћења: Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping motions.

The TECLUNG ATX is equipped with an advanced smart and anti-interference chip, enhancing detection accuracy and depth.

Image 5.2: Illustration of the high-precision copper detection wire and anti-interference chip.

The 15-inch search coil is waterproof, allowing for detection in shallow water environments such as beaches and rivers.

Image 5.3: The waterproof search coil being used in a shallow water environment.

The detector is suitable for various terrains, including forests, grassy areas, beaches, and rivers.

Image 5.4: The metal detector in use across different outdoor settings.

6. Одржавање

Правилно одржавање осигурава дуготрајност и оптималне перформансе вашег детектора метала.

• Cleaning the Search Coil: Since the search coil is waterproof, it can be rinsed with fresh water after use, especially if used in saltwater or muddy conditions. Ensure it is dry before storage.
• Cleaning the Control Box: Wipe the control box with a soft, damp cloth. Do not submerge the control box in water as it is not waterproof. Avoid using abrasive cleaners or solvents.
• Складиштење: Store the detector in a cool, dry place when not in use. If storing for an extended period, remove any batteries to prevent leakage.
• Нега каблова: Inspect all cables for damage regularly. Avoid sharp bends or excessive pulling.

КСНУМКС. Решавање проблема

If you encounter issues with your TECLUNG ATX Metal Detector, refer to the following common problems and solutions:

• Нема напајања:
  
  • Check if the power button is fully pressed.
  • Ensure batteries are correctly installed and fully charged or replaced if necessary.
• False Signals/Chatter:
  
  • Reduce the sensitivity (Gain) setting.
  • Perform ground balance if operating in mineralized soil.
  • Ensure there are no other electronic devices or power lines nearby causing interference.
  • Проверите да ли има лабавих каблова или конекција.
• Poor Detection Depth:
  
  • Increase the sensitivity (Gain) setting, but be mindful of false signals.
  • Ensure the search coil is parallel to the ground and swept slowly.
  • Проверите ниво батерије; слабе батерије могу утицати на перформансе.
  • Perform ground balance.
• Inaccurate Pinpointing:
  
  • Ensure you are in Pinpoint mode.
  • Slowly move the coil over the target area to find the strongest signal.

8. Спецификације

9. Гаранција и подршка

For warranty information or technical support, please refer to the documentation included with your purchase or contact TECLUNG customer service directly. Keep your purchase receipt as proof of purchase.