HUNSN RJ03

HUNSN RJ03 Micro Firewall Appliance User Manual

Модел: RJ03

Увод

This manual provides detailed instructions for the setup, operation, and maintenance of your HUNSN RJ03 Micro Firewall Appliance. The RJ03 is a compact, fanless mini PC designed for network security applications, including use as a firewall, VPN router, or other network appliance. It features an Intel Celeron N5105 processor and multiple 2.5GbE LAN ports.

Молимо вас да пажљиво прочитате ово упутство пре употребе уређаја како бисте осигурали правилну инсталацију и оптималне перформансе.

Безбедносне информације

  • Ensure the device is placed on a stable, flat surface with adequate ventilation.
  • Use only the provided power supply. Using an incorrect power supply may damage the device and void the warranty.
  • Не излажите уређај води, влази или екстремним температурама.
  • Avoid opening the chassis unless performing authorized upgrades (RAM, SSD/HDD, WiFi module). Disconnecting internal components improperly can cause damage.
  • In case of malfunction, disconnect the power supply and contact support. Do not attempt repairs yourself.

Садржај пакета

Проверите да ли су све ставке присутне у пакету:

  • HUNSN RJ03 Firewall Appliance
  • Power Supply (DC12V3A)
  • Повер Цорд
  • Гарантни лист

Производ је завршенview

The HUNSN RJ03 is a compact, fanless mini PC designed for robust network applications. Its aluminum chassis acts as a heatsink, ensuring silent operation.

Предња плоча

Фронт view of HUNSN RJ03 Micro Firewall Appliance

Слика 1: Изглед предњег панела

The front panel provides essential user interfaces:

  • Дугме за укључивање/искључивање: Used to power the device on or off.
  • CLR CMOS Button: A small button to clear CMOS settings, often requiring a pin to press.
  • USB 3.0 портови (2x): За повезивање USB уређаја велике брзине.
  • Порт типа Ц: Supports display output and USB connectivity.
  • Слот за ТФ картицу: For TransFlash (MicroSD) memory cards.
  • Antenna Connectors (2x): For optional WiFi antennas.

Реар Панел

Позади view of HUNSN RJ03 Micro Firewall Appliance with ports labeled

Слика 2: Изглед задњег панела

Задњи панел садржи главне опције повезивања:

  • USB 2.0 портови (2x): За повезивање стандардних УСБ уређаја.
  • ХДМИ порт: For connecting to a display.
  • ДисплаиПорт (ДП): For connecting to a display.
  • LAN Ports (4x 2.5GbE I226-V): Four 2.5 Gigabit Ethernet ports for network connections (ETH0, ETH1, ETH2, ETH3).
  • DC_IN Port: For connecting the 12V power adapter.

Упутства за подешавање

1. Hardware Installation (Optional)

If you purchased a barebones unit or wish to upgrade, follow these steps to install RAM, SSD/HDD, or a WiFi module. Ensure the device is powered off and disconnected from the power source before proceeding.

  1. Отворите шасију: Carefully remove the screws securing the bottom panel of the appliance.
  2. Инсталирајте РАМ: The device supports 2 x SODIMM DDR4 2933MHz, up to 32GB. Insert the RAM modules into the SODIMM slots, ensuring they are seated correctly and the clips lock them in place.
  3. Инсталирај меморију:
    • M.2 NVMe SSD: Insert the M.2 2280 PCIe 3.0 x1 NVMe SSD into its dedicated slot and secure it with the provided screw.
    • 2.5 Inch SATA SSD/HDD: Connect a 2.5-inch SATA SSD or HDD using the internal SATA data and power cables (if included). Secure the drive within the chassis.
  4. Install M.2 WiFi Module (Optional): If installing a WiFi 6 module, insert it into the M.2 WiFi slot and connect the antenna cables.
  5. Затворите шасију: Replace the bottom panel and secure it with the screws.

2. Повезивање периферних уређаја

  1. Прикључак за напајање: Connect the provided power adapter to the DC_IN port on the rear panel, then plug the power cord into an electrical outlet.
  2. Мрежна конекција: Connect your network cables to the 2.5GbE LAN ports (ETH0-ETH3) as required for your network configuration (e.g., WAN, LAN, DMZ).
  3. Display and Input (Optional): For initial setup or direct interaction, connect a monitor via HDMI or DisplayPort, and a keyboard/mouse to the USB ports.

3. Почетно покретање

Press the Power ON/OFF button on the front panel. The device should power on. If a display is connected, you will see the boot sequence.

Инсталација оперативног система

The HUNSN RJ03 supports a variety of operating systems and network appliance software. It supports UEFI boot only.

  • Компатибилни системи: 5.10.x and above core-based FreeBSD router systems, Linux distributions, or Windows operating systems.
  • Firewall Software: Compatible with popular open-source solutions such as pfSense and OPNsense.
  • Процес инсталације:
    1. Prepare a bootable USB drive with your chosen operating system or firewall software.
    2. Connect the USB drive to a USB port on the RJ03.
    3. Power on the device and enter the BIOS/UEFI setup (usually by pressing DEL or F2 during boot) to configure the boot order, prioritizing the USB drive.
    4. Следите упутства на екрану да бисте инсталирали оперативни систем.
  • Network Driver Considerations: The Intel I226-V 2.5GbE LAN ports may require specific drivers or a newer kernel version for optimal performance, especially with certain older operating systems or firewall distributions (e.g., older pfSense versions). Ensure your chosen OS version supports these NICs or be prepared to install necessary drivers.

Операција

Once the operating system is installed and configured, the HUNSN RJ03 functions as a reliable network appliance. Specific operation details will depend on the software installed (e.g., OPNsense, pfSense).

  • Управљање струјом: The device supports hardware auto power-on (enabled by default), network wake-up (Wake-on-LAN), and system power management features. These can typically be configured in the BIOS/UEFI settings.
  • Дизајн без вентилатора: The fanless design ensures silent operation (0.00dB noise). The aluminum chassis acts as a large heatsink, dissipating heat efficiently.
  • Управљање температуром: The device is designed to operate within a temperature range of 0°C to 70°C. While the chassis may feel warm to the touch, this is normal for fanless systems and indicates effective heat dissipation.

Одржавање

  • Чишћење: Periodically clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation fins are free from dust accumulation to maintain optimal cooling.
  • Хлађење: Although fanless, ensure the device has adequate airflow around its chassis. Avoid placing it in enclosed spaces without ventilation. If operating in consistently high ambient temperatures or under heavy load, consider adding an external USB fan for additional cooling, especially if system temperatures are a concern.
  • Ажурирања фирмвера: Check the HUNSN support website or contact customer service for any available BIOS/UEFI firmware updates, which may improve compatibility or performance.

Решавање проблема

ПроблемМогући узрокРешење
Уређај се не укључује.No power, faulty power supply, or internal connection issue.
  • Verify power cord and adapter are securely connected.
  • Test the power outlet.
  • Уверите се да је дугме за напајање потпуно притиснуто.
Нема излаза на екрану.Incorrect display connection, monitor input, or BIOS settings.
  • Check HDMI/DisplayPort cable connections.
  • Ensure monitor is set to the correct input source.
  • Try connecting to a different display port (HDMI or DP).
  • Clear CMOS using the CLR CMOS button (refer to Product Overview).
Network interfaces (LAN ports) not working or slow.Missing or incorrect network drivers, incompatible OS kernel.
  • Ensure your operating system or firewall software has the correct drivers for Intel I226-V NICs.
  • Consider updating the OS kernel or using a newer version of your chosen software (e.g., pfSense 2.7 or OPNsense).
  • Verify network cable integrity.
Device runs very warm.Normal operation for fanless design, or insufficient ventilation.
  • Обезбедите адекватан проток ваздуха око уређаја.
  • Avoid placing it in direct sunlight or confined spaces.
  • If consistently under heavy load, consider an external cooling fan.

Спецификације

Број моделаHUNSN RJ03
ШасијаAluminum, Fanless Design
ПроцесорIntel Celeron N5105 (4M Cache, up to 2.90 GHz)
AES-NI SupportДа
Меморија2 x SODIMM DDR4 2933MHz, max. 32GB (4GB installed in base model)
Складиштење1 x M.2 2280 PCIe 3.0 x1 NVMe SSD, 1 x 2.5 Inch SATA SSD/HDD (128GB SSD installed in base model)
Мрежна картица4 x 2.5GbE Intel I226-V LAN
И/О интерфејсPower ON/OFF, CLR CMOS, 2 x USB 3.0, Type-C (Display/USB), TF Card Slot, 2 x USB 2.0, HDMI, DisplayPort, 4 x LAN, DC_IN
Проширење1 x M.2 WiFi 6 slot
ПоверDC100-240V AC/50-60Hz input, 12V3A output
Радна температура0°Ц ~ 70°Ц
Температура складиштења-20°Ц ~ 80°Ц
Релативна влажност10% ~ 90% без кондензације
ТДП10В
Систем за хлађењеFanless, supports optional 12V 4-pin 8010 fan
Димензије145.6 к 135.6 к 53.6 мм
Тежина1.5 кг (приближно 3.3 лбс)
Компатибилност системаFreeBSD router systems (5.10.x+), Linux distros, Windows OS (UEFI support only)
Посебне карактеристикеHardware auto power on (default), network wake-up, system power management, temperature management

Гаранција и подршка

Your HUNSN RJ03 appliance comes with a warranty. Please refer to the included warranty card for specific terms and conditions. For technical support, troubleshooting assistance, or inquiries regarding parts and upgrades, please contact HUNSN customer service through the retailer where you purchased the product or visit the official HUNSN store online.

За додатне ресурсе и информације о производу, можете посетити HUNSN Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.