iKiKin AP-8 Upgrade HUD OBD2 GPS and Slope Meter User Manual

1. Увод

The iKiKin AP-8 Head Up Display (HUD) is a multi-function smart gauge designed to provide real-time vehicle data directly in your line of sight. It integrates OBD2, GPS, and Slope Meter functionalities to offer comprehensive driving information and safety warnings. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal use of your device.

Image 1.1: The iKiKin AP-8 Head Up Display showing speed, RPM, fuel consumption, and temperature.

Image 1.2: The iKiKin AP-8 is compatible with a wide range of vehicles, including new energy vehicles, buses, trucks, bicycles, scooters, and motorcycles.

2. Подешавање и инсталација

The iKiKin AP-8 offers a plug-and-play installation process. Follow these steps to set up your device:

1. Locate the OBD2 Interface: The OBD2 interface is typically located on the driver's side, approximately 30 cm from the middle of the instrument panel.
2. Connect the OBD Cable: Turn the vehicle ignition off. Connect one end of the provided OBD cable to the vehicle's OBD2 interface.
3. Connect to Smart Gauge: Connect the other end of the OBD cable to the Smart Gauge (HUD).
4. Усмерите кабл: Carefully hide the OBD cable in the A-pillar or along the dashboard for a neat installation.
5. Укључено: Turn the vehicle ignition on. The HUD should power on automatically.

Image 2.1: Installation diagram showing the OBD2 port location, cable connection, and routing.

2.1 Садржај пакета

Уверите се да су све компоненте присутне у пакету:

• iKiKin AP-8 OBD2 Gauge
• ОБД2 кабл
• Кориснички приручник (овај документ)
• Velcro Sticker (for mounting)
• Hexagon Wrench (for adjustment)

3. Упутство за употребу

The iKiKin AP-8 features multiple display interfaces and operating modes to suit various driving needs.

3.1 Display Modes: OBD2, GPS, and Slope Meter

The device supports three primary data acquisition systems:

• OBD2 режим: Connects to your vehicle's On-Board Diagnostics system to display engine-related data.
• ГПС режим: Uses satellite signals to display speed, time, and other location-based data.
• Slope Meter: Measures the vehicle's roll and pitch angles, useful for off-road driving.

Image 3.1: The AP-8 integrates OBD2, GPS, and Slope Meter functionalities, offering diverse display options.

3.2 Switching to GPS Mode

To switch from OBD2 mode to GPS mode:

1. From the normal display interface, long press the [OK] button for 5 seconds да унесете подешавања.
2. Кратко притисните на Лево или десно дугме to navigate to 'Settings', then short press the дугме [ОК]. да уђе.
3. Кратко притисните на Лево дугме to choose 'OBD Switch', then short press the дугме [ОК]. да уђе.
4. Кратко притисните на Лево дугме to change the setting to 'Close', then short press the дугме [ОК]. да спасе.
5. Long press the [OK] button for 5 seconds to return to the upper menu or exit settings. The device will now operate in GPS mode.

3.3 OBD2 Display Items

In OBD2 mode, the HUD can display up to 11 types of vehicle data:

• Брзина
• Волtage
• Температура воде
• РПМ (обр. у минути)
• Потрошња горива
• Дривинг Дистанце
• Време вожње
• Температура усисног ваздуха
• Температура уља
• Притисак турбине
• Притисак уља
• PID List (Parameter IDs)

Image 3.2: Visual representation of the OBD2 data items available on the display.

3.4 GPS Display Items

In GPS mode, the HUD provides navigation and location-based data:

• ГПС брзина
• Смер вожње
• Water Temperature (if available via GPS data)
• Висина
• ГПС Тиме
• Сателитски број
• Accurate Position (Latitude/Longitude)
• Волtage (if available via GPS data)

Image 3.3: Visual representation of the GPS data items available on the display.

3.5 Slope Meter Function

The integrated slope meter provides real-time information on your vehicle's tilt angles, which is particularly useful for off-road driving or navigating uneven terrain.

• Угао котрљања: Indicates the vehicle's side-to-side tilt.
• Pitch Angle: Indicates the vehicle's front-to-back tilt (uphill/downhill).

Image 3.4: The Slope Meter interface showing real-time roll and pitch angles.

3.6 Тестови перформанси

The AP-8 HUD includes functions for performance testing:

• Тест убрзања: Measures the time taken to accelerate from 0 to 100 KM/H.
• Тест кочнице: Measures the braking distance and time when stopping from 100 KM/H.

Image 3.5: Acceleration Test Interface.

Image 3.6: Brake Test Interface.

3.7 Интерфејси екрана

The AP-8 offers 11 distinct display interfaces, allowing you to customize the information presented. You can switch between these interfaces to view different combinations of data.

Image 3.7: Display Interfaces 1-4.

Image 3.8: Display Interfaces 5-8.

Image 3.9: Display Interfaces 9-11.

3.8 Видео о производу

4. Одржавање

To ensure the longevity and optimal performance of your iKiKin AP-8 HUD, follow these maintenance guidelines:

• Чишћење: Use a soft, dry cloth to clean the display screen and device body. Avoid abrasive cleaners or solvents that could damage the surface.
• температура: Do not expose the device to extreme temperatures (hot or cold) for extended periods, as this can affect its electronic components.
• Влага: Држите уређај сувим. Избегавајте контакт са водом или другим течностима.
• Складиштење: When not in use for a long time, store the device in a cool, dry place away from direct sunlight.

КСНУМКС. Решавање проблема

If you encounter issues with your iKiKin AP-8 HUD, refer to the following troubleshooting steps:

5.1 Reading and Clearing Fault Codes

The HUD can read and clear diagnostic trouble codes (DTCs) from your vehicle's OBD2 system:

1. Navigate to the 'Scan DTC' option in the settings menu.
2. Кратко притисните на дугме [ОК]. to display detailed DTCs.
3. Follow on-screen prompts to clear codes if necessary.

Image 5.1: Reading a detailed fault code on the HUD.

5.2 Враћање фабричких подешавања

If the device is not functioning as expected or you wish to reset all settings:

1. Navigate to 'Restore Settings' in the settings menu.
2. Притисните тастер дугме [ОК].. The screen will show 'RESET'.
3. Кратко притисните на Лево дугме to confirm. The OBD Gauge will restart, indicating the factory reset is complete.

Image 5.2: Restoring the device to factory settings.

5.3 Уобичајена питања

• Без приказа: Ensure the OBD2 cable is securely connected to both the vehicle's port and the HUD. Check if the vehicle's ignition is on.
• Нетачно брзо читање: If in GPS mode, ensure a clear view of the sky for satellite reception. If in OBD2 mode, check vehicle settings or perform a factory reset.
• Уређај се замрзава: Disconnect the OBD2 cable, wait 10 seconds, and reconnect it. If the issue persists, perform a factory reset.

6. Спецификације

7. Гаранција и подршка

Specific warranty information and detailed support contacts are not provided in this manual. Please refer to the product packaging or the official iKiKin webсајт за најновије услове гаранције и опције корисничке подршке.