Humanscale eFloat Go Electric Height-Adjustable Desk User Manual

1. Увод и крајview

The Humanscale eFloat Go is an electric height-adjustable desk designed for both home and commercial office environments. It features innovative anti-collision technology, quiet motors, and a programmable hand switch, allowing users to seamlessly adjust their working position throughout the day.

Кључне карактеристике укључују:

• Electric Height-Adjustable Table for dynamic work postures.
• Programmable hand switch to store and recall preferred height settings.
• Spacious 30" Depth by 60" Width top (for this specific model).
• Designed for quick and easy setup.

Image 1.1: The Humanscale eFloat Go desk in a modern office environment, showcasing its design and functionality with a monitor and accessories.

2. Безбедносне информације

Please read and understand all safety instructions before operating the eFloat Go desk. Failure to follow these instructions may result in injury or damage to the product.

• Always keep hands and objects clear of all moving parts during height adjustments.
• Не прекорачујте препоручену максималну тежину 250 фунте (113 кг) on the desk surface to ensure stability and safe operation.
• Ensure the power cord is properly routed to prevent tripping hazards or damage.
• Do not allow children to operate the desk without adult supervision.
• Avoid placing liquids directly on the desk surface without proper coasters or protection.

3. Подешавање и монтажа

The Humanscale eFloat Go desk is designed for straightforward assembly, typically taking under 5 minutes with the recommended tools. Assembly requires at least one person.

3.1 Потребни алати

• Шрафцигер (није укључен)

3.2 Кораци монтаже

1. Распакујте компоненте: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components are present according to the packing list.
2. Attach Legs to Top: Position the desk top upside down. Align the desk legs with the pre-drilled holes on the underside of the desk top. Secure the legs using the provided screws and a screwdriver.
3. Connect Control Box and Hand Switch: Locate the control box and connect the motor cables from each leg. Connect the hand switch cable to the designated port on the control box.
4. Путни каблови: Use the included cable management clips to neatly route all cables, ensuring they do not interfere with the desk's movement.
5. Прикључите напајање: Plug the power cord into the control box, then into a standard electrical outlet.
6. Initial Power-On and Reset: After connecting power, the desk may require an initial reset. Refer to Section 4.1 for first-time use and reset procedures.

Image 3.1: Dimensional diagram of the eFloat Go desk, illustrating its 29" depth, 58" width, and 26.5" height.

4. Упутство за употребу

The eFloat Go desk features an intuitive programmable hand switch for easy height adjustment and memory settings.

4.1 First-Time Use and Reset

Upon initial power-on or after a power interruption, the desk may need to be reset:

1. Притисните и држите ДОВН arrow button until the desk reaches its lowest position and then slightly rises. Release the button.
2. The desk is now calibrated and ready for use.

4.2 Подешавање висине стола

• To raise the desk, press and hold the UP дугме са стрелицом.
• To lower the desk, press and hold the ДОВН дугме са стрелицом.
• Release the button at your desired height.

4.3 Programming Memory Presets

The hand switch allows you to save up to three preferred height settings:

1. Adjust the desk to your desired height using the UP/DOWN arrow buttons.
2. Притисните тастер M (Memory) button. The display will show 'S-'.
3. Within 3 seconds, press one of the numbered preset buttons (1, 2, или 3). The display will show 'S-1', 'S-2', or 'S-3' to confirm the setting is saved.
4. Repeat for other desired height settings.

4.4 Using Memory Presets

To move the desk to a saved height:

• Simply press the corresponding numbered preset button (1, 2, или 3). Сто ће се аутоматски померити на сачувану висину.

4.5 Anti-Collision Technology

The eFloat Go desk is equipped with anti-collision technology. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. Clear any obstructions before resuming adjustment.

Слика 4.1: Крупни план view of the programmable hand switch, showing the up/down arrows, memory button (M), and three preset buttons (1, 2, 3).

5. Одржавање

Proper care will ensure the longevity and optimal performance of your Humanscale eFloat Go desk.

• Чишћење: Wipe the desk surface and frame with a dry, soft cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners or harsh chemicals.
• Услови животне средине: Avoid direct sunlight exposure for extended periods, as this may affect the laminate finish.
• Дистрибуција тежине: Do not place heavy objects exclusively on the edges of the desk. Distribute weight evenly across the surface.
• Управљање кабловима: Periodically check that all cables are securely routed and not pinched or damaged.

КСНУМКС. Решавање проблема

If you encounter issues with your eFloat Go desk, refer to the following common troubleshooting steps:

6.1 Desk Not Moving

• Проверите снагу: Ensure the power cord is securely plugged into both the desk's control box and a functioning wall outlet.
• Процедура ресетовања: Perform the reset procedure described in Section 4.1.
• Заштита од преоптерећења: If the desk has been overloaded (exceeding 250 lbs), the motor may have temporarily shut off. Remove excess weight and wait a few minutes before attempting to operate again.

6.2 Uneven Movement or Noise

• Проверите да ли има препрека: Ensure there are no objects impeding the legs or frame during movement.
• Ниво површина: Verify the desk is placed on a level floor. Adjust the leveling feet if necessary.
• Поново затегните завртње: Over time, some assembly screws may loosen. Carefully re-tighten all assembly screws.

6.3 Anti-Collision System Triggering Frequently

• Очисти пут: Ensure the desk's path of movement is completely clear of any objects, cables, or walls.
• Осетљивост: If the issue persists without clear obstructions, contact Humanscale support for potential sensitivity adjustments or further diagnostics.

7. Спецификације

8. Гаранција и подршка

Humanscale stands behind the quality of its products.

8.1 Информације о гаранцији

The Humanscale eFloat Go desk is covered by a 10-Year, 24/7 Humanscale Warranty. This comprehensive warranty covers parts and labor for manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

8.2 Корисничка подршка

For technical assistance, warranty claims, or further inquiries, please contact Humanscale customer support. You can find more information and contact details by visiting the official Humanscale store:

Visit the Humanscale Store on Amazon