ANENG PN200

ANENG PN200 Дигитални Клamp Упутство за употребу мерача и мултиметра

Модел: PN200

1. Производ је готовview

The ANENG PN200 is a versatile digital clamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

ANENG PN200 Дигитални Клamp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. Садржај пакета

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp Метер
  • 2к ААА батерије
  • 1x Combination Test Lead Set (includes 4 connection sockets, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 meter pens, 2 alligator clips, 2 puncture needles)
  • 1x Multimeter Test Lead Set
  • 1к кабл за пуњење
  • 1к Упутство за употребу
  • КСНУМКСк торба за складиштење

3. Подешавање

3.1 Инсталација батерије

  1. Пронађите поклопац одељка за батерију на задњој страни уређаја.
  2. Скините поклопац да бисте отворили одељак.
  3. Уметните две ААА батерије, водећи рачуна о исправном поларитету (+/-).
  4. Вратите поклопац одељка за батерију на место док не кликне чврсто.

3.2 Повезивање мерних каблова

  1. Фор волtage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. Insert the red test lead into the 'VΩHz' jack.
  3. Ensure connections are firm before use.

4. Упутство за употребу

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 Избор функције

Turn the rotary dial to select the desired measurement function:

  • В ~: АЦ Волtagе мерење
  • В-: ДЦ Волtagе мерење
  • A~: AC Current measurement (using clamp)
  • ТО-: DC Current measurement (using clamp)
  • Ω: Мерење отпора
  • Хз: Мерење фреквенције
  • Капацитет: Мерење капацитета
  • Диода/Континуитет: Diode test and Continuity check
  • НЦВ: Нон-Цонтацт Волtagе детекција

4.2 Кључне функције

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • РЕЛ: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clampинг.
  • КОМПЛЕТ: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 Specific Measurements

Испод су уобичајене процедуре мерења:

АЦ/ДЦ Волtagе Мерење

  1. Turn the dial to 'V~' for AC voltage or 'V-' for DC voltage.
  2. Connect the test leads to the circuit points you wish to measure.
  3. Прочитајте књtagе вредност на дисплеју.

AC/DC Current Measurement (Clamp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. Отворите цлamp jaws and enclose a single conductor (not a bundle of wires).
  3. Очитајте тренутну вредност на дисплеју.
  4. Напомена: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clampинг.
ANENG PN200 Дигитални Клamp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
ANENG PN200 Дигитални Клamp Meter showing various measurement functions

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltagе, АЦ Волtage, Capacitance, Diode, Capacitive Discharge, and Resistance.

Нон-Цонтацт Волtagе (НЦВ) Детекција

  1. Turn the dial to 'NCV'.
  2. Bring the top part of the clamp meter near an AC voltagе извор.
  3. The meter will beep and an indicator light will illuminate if AC voltagе је откривено.
ANENG PN200 Дигитални Клamp Meter performing NCV detection

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 Official Product Video Demonstration

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp Метар.

5. Одржавање

5.1 Чишћење

Обришите уређај сувом, меком крпом. Не користите абразивна средства за чишћење или раствараче.

5.2 Замена батерије

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 Складиштење

Чувајте клamp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

КСНУМКС. Решавање проблема

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.