Јахитек 592495

Yaheetech Model 592495 Dining Chairs (Set of 6) Instruction Manual

1. Увод

Thank you for choosing Yaheetech Dining Chairs. This manual provides detailed instructions for the proper assembly, safe use, and effective maintenance of your new dining chairs. Please read this manual thoroughly before assembly and retain it for future reference.

2. Безбедносне информације

  • Немојте стајати на столици. Standing on the chair can lead to instability and potential injury.
  • The maximum weight capacity for each dining chair is 136 кг (300 лб). Exceeding this limit may compromise the chair's structural integrity and safety.
  • Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten fasteners as needed.
  • Држите мале делове и материјале за паковање даље од деце како бисте спречили опасност од гушења.
  • Assemble the chairs on a soft, clean surface to prevent scratching the product or your floor.

3. Садржај пакета

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact Yaheetech customer support.

  • Dining Chair Backrest (6 units)
  • Dining Chair Seat (6 units)
  • Front Legs (6 pairs)
  • Rear Legs (6 pairs)
  • Пакет хардвера (шрафови, подлошке, имбус кључ)
  • Кориснички приручник (овај документ)
Six Yaheetech dining chairs in beige fabric with dark wood legs, arranged in two rows of three.

Слика 3.1: Завршеноview of six Yaheetech dining chairs.

4. Упутство за монтажу

Assembly typically requires one person and approximately 15-20 minutes per chair. An Allen wrench is included in the hardware pack.

  1. Причврстите ноге на седиште: Carefully align the chair legs with the pre-drilled holes on the underside of the chair seat. Insert the screws with washers and hand-tighten them initially.
  2. Причврстите наслон: Connect the backrest to the seat frame, ensuring proper alignment. Insert screws and washers, hand-tightening them.
  3. Balance and Tighten: Once all components are loosely assembled, stand the chair upright on a flat, level surface. Gently apply pressure to the seat to ensure all legs are balanced and touching the floor evenly. Then, securely tighten all screws using the provided Allen wrench. Do not overtighten.
  4. Подесите ослонце за стопала: The front legs are equipped with adjustable foot pads. Rotate these pads to fine-tune the chair's stability and prevent wobbling on uneven floors.
Diagram showing three steps for chair assembly: 1. Align and half-tighten screws for legs. 2. Stand chair upright and verify balance. 3. Tighten all screws securely.

Слика 4.1: Визуелни водич за кораке склапања столице.

Close-up images highlighting chair features: soft backrest, modern bronze-finish studs, thickened cushion, solid wood legs, front feet with adjustable footpads, and S-shaped spring in the seat.

Слика 4.2: Детаљно view of chair components and features.

5. Упутства за употребу

These dining chairs are designed for indoor use in dining rooms, kitchens, living rooms, and similar environments. Ensure the chair is placed on a stable, level surface before sitting. The ergonomically curved backrest is designed to provide comfortable support during use.

A set of six beige Yaheetech dining chairs surrounding a modern dining table in a bright kitchen setting.

Figure 5.1: Yaheetech dining chairs in a kitchen environment.

6. Одржавање

To maintain the appearance and longevity of your Yaheetech dining chairs, follow these care instructions:

  • Чишћење: Обришите меком крпом, дamp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the fabric and wood finish.
  • Просипање: Одмах обришите просуту течност чистом, сувом крпом. Не трљајте, јер то може проширити мрљу.
  • Сунчева светлост: Избегавајте продужено излагање директној сунчевој светлости како бисте спречили блеђење тканине.
  • инспекција: Periodically inspect all fasteners and re-tighten if necessary to ensure stability.

КСНУМКС. Решавање проблема

If you encounter any issues with your dining chairs, refer to the following common solutions:

  • Столица се љуља: Check if all legs are evenly touching the floor. Adjust the foot pads on the front legs by rotating them until the chair is stable. Ensure all assembly screws are securely tightened.
  • Loose Nailhead Trims: If any decorative nailhead trims become loose, gently push them back into place. If they continue to loosen, a small amount of fabric adhesive can be used to secure them.
  • Шкрипави звуци: Squeaking can often be resolved by re-tightening all assembly screws. If the issue persists, disassemble and reassemble the chair, ensuring all parts are correctly aligned.

8. Спецификације

ФеатуреДетаљ
БрандИахеетецх
Број модела592495
БојаБеж
Димензије производа (по комаду)23"Д к 17"Ш к 38"В
Висина седишта20 инча
Дубина седишта17 инча
Сеат Ленгтх16.5 инча
Максимална носивост (по столици)300 фунти (136 кг)
МатеријалиPolyester, Rubberwood, Solid Wood, Engineered Wood, Foam, Sinuous Spring, Non-woven Fabrics
Посебна карактеристикаПодесиве ноге
Упутства за одржавање производаОбрисати
Diagram showing the dimensions of a Yaheetech dining chair: 38 inches total height, 20 inches seat height, 17 inches seat depth, 16.5 inches seat width, 18 inches backrest height, and 23.5 inches backrest width. Maximum weight capacity is 300 lbs.

Figure 8.1: Detailed dimensions of the dining chair.

9. Гаранција и подршка

For warranty information, missing parts, or any product-related inquiries, please contact Yaheetech customer support directly. Refer to your purchase documentation or the Yaheetech official webсајт за контакт детаље.

Произвођач: Иахеетецх

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.