Flysky FS-i6X 10-Channel 2.4GHz RC Transmitter and X6B Receiver User Manual

1. Увод

Thank you for choosing the Flysky FS-i6X 10-Channel 2.4GHz RC Transmitter and X6B Receiver. This system utilizes Flysky's Automatic Frequency Hopping Digital System Second Generation (AFHDS 2A) protocol, providing reliable and interference-free control for various RC models, including fixed-wing aircraft, gliders, helicopters, and multi-rotors. This manual provides essential information for the proper setup, operation, and maintenance of your RC system.

2. Садржај пакета

Please inspect the package contents to ensure all items are present and undamaged:

• Flysky FS-i6X 10-Channel 2.4GHz Transmitter
• Flysky X6B i-BUS Receiver
• Биндинг Плуг
• Кориснички приручник (овај документ)

3. Подешавање

3.1 Инсталација батерије предајника

The FS-i6X transmitter requires four (4) AA batteries (1.5V each) for operation. Ensure correct polarity when inserting the batteries.

1. Отворите поклопац одељка за батерије на задњој страни предајника.
2. Insert four 1.5V AA batteries, observing the polarity markings (+/-).
3. Добро затворите поклопац одељка за батерије.

3.2 Receiver Connection (X6B)

The X6B receiver is designed for multi-rotor applications and supports PWM, PPM, and i-BUS outputs. Connect the receiver to your flight controller or servos as follows:

• ПВМ излаз: Connect individual servos or ESCs to channels 1-6 on the receiver.
• Излаз PPM-а: Connect the PPM output port to your flight controller's PPM input. This provides 8 channels over a single wire.
• i-BUS излаз: Connect the i-BUS port to your flight controller's serial input. This provides 18 channels and telemetry data over a single wire.

слика: Flysky X6B i-BUS Receiver board. This image shows the compact blue circuit board of the X6B receiver, featuring dual antennas for improved signal reception, and clearly labeled ports for PPM, i-BUS, and individual PWM channels (CH1-CH6) for connecting to a flight controller or servos.

3.3 Binding Transmitter and Receiver

Binding is the process of linking the transmitter to the receiver, allowing them to communicate exclusively. Ensure both devices are powered off before starting.

1. Insert the binding plug into the 'BIND' port on the X6B receiver.
2. Прикључите напајање на пријемник. ЛЕД диода пријемника треба брзо да трепери, што указује да је у режиму повезивања.
3. While holding down the 'BIND' button on the FS-i6X transmitter, power on the transmitter.
4. The transmitter's screen should display 'Binding...' or similar. Release the 'BIND' button on the transmitter once the binding process begins.
5. Once the receiver's LED turns solid, the binding is complete.
6. Искључите и пријемник и предајник.
7. Уклоните утикач за везивање са пријемника.
8. Power on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful connection.

4. Упутство за употребу

4.1 Укључивање/искључивање

To power on the transmitter, press and hold the power button until the LCD screen illuminates. To power off, press and hold the power button again until the screen turns off.

4.2 Transmitter Layout and Controls

слика: Flysky FS-i6X RC Transmitter front view. This image displays the front of the FS-i6X transmitter, highlighting its dual stick controls (gimbals), various switches (SWD, SWC, SWB, SWA), rotary knobs (VRB, VRA), and the central LCD screen for menu navigation and displaying flight data.

The FS-i6X transmitter features two primary control sticks (gimbals), several switches, and rotary knobs for controlling your RC model. The LCD screen and navigation buttons allow access to the system's settings.

• Леви штап (режим 2): Controls Throttle (vertical) and Rudder (horizontal).
• Десни штап (режим 2): Controls Elevator (vertical) and Aileron (horizontal).
• Switches (SWA, SWB, SWC, SWD): Typically used for flight modes, gear, or auxiliary functions.
• Rotary Knobs (VRA, VRB): Used for fine-tuning or proportional control of auxiliary channels.
• ЛЦД екран: Displays current settings, telemetry data, and menu options.
• Дугмад за навигацију: Used to navigate through menus and adjust settings.

4.3 Навигација кроз мени и подешавања

Use the 'OK' button to enter the main menu and the 'UP'/'DOWN' buttons to scroll through options. The 'CANCEL' button typically returns to the previous screen or exits the menu.

• Подешавање система: Configure model type, channel assignments, and system settings.
• Функције: Adjust sub-trims, endpoints, dual rates, and exponential settings.
• Приказ: Monitor channel outputs and telemetry data (if available and configured).

5. Одржавање

Proper maintenance ensures the longevity and reliable performance of your Flysky FS-i6X system.

• Чишћење: Користите меку, суву крпу за чишћење предајника и пријемника. Избегавајте употребу растварача или абразивних средстава за чишћење.
• Складиштење: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods.
• Брига о антени: Ensure the receiver antennas are not bent sharply or damaged. For optimal performance, position them at a 90-degree angle to each other.
• Ажурирања фирмвера: Периодично проверавајте званичника компаније Flysky website for firmware updates for your FS-i6X transmitter. Updates can improve performance and add new features. The FS-i6X supports online updates.

КСНУМКС. Решавање проблема

If you encounter issues with your FS-i6X system, refer to the following common problems and solutions:

7. Спецификације

7.1 Flysky FS-i6X RC Transmitter

7.2 Flysky X6B i-BUS Receiver

Note: The FS-i6X transmitter is also compatible with other Flysky receivers such as FS-iA6B, FS-iA10B, and FS-A8S, which may have different specifications. This manual focuses on the X6B receiver included with this specific product variant.

8. Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided by your retailer or contact Flysky customer service directly. Keep your proof of purchase for warranty claims.