POMIACAM 5-Inch 4-in-1 CCTV Monitor Tester

Увод

This manual provides comprehensive instructions for the POMIACAM 5-Inch 4-in-1 CCTV Monitor Tester, Model IV8W. It covers product features, setup, operation, maintenance, troubleshooting, and technical specifications. Please read this manual thoroughly before using the device to ensure proper operation and to prevent damage.

Производ је завршенview

Кључне карактеристике

• 5-inch TFT-LCD screen (800*480 resolution) for clear video display.
• Supports 4-in-1 HD video surveillance testing: AHD, TVI, CVI, and CVBS cameras up to 8MP.
• Integrated PTZ controller with Pelco-D/P protocol via RS485 interface.
• HDMI and VGA inputs for use as a monitor or for DVR/NVR debugging.
• UTP cable test functionality to display connection status and line sequence.
• DC12V 1A power output to power cameras directly.
• Built-in rechargeable battery providing up to 11 hours of continuous operation.

Шта је у кутији

Стандардни пакет укључује:

• POMIACAM 5-Inch 4-in-1 CCTV Monitor Tester (Model IV8W)
• Повер Адаптер
• УСБ кабл за пуњење
• BNC Cables (for video connection)
• ДЦ кабл за напајање
• Врист Страп
• UTP Terminator Dongle (for cable testing)

Device Layout and Ports

Familiarize yourself with the various ports and controls on the POMIACAM CCTV Tester.

• Дугме за напајање: Located on the top right side.
• ДЦ12В излаз: For powering external cameras.
• УСБ порт: For data transfer or charging.
• Аудио улаз/излаз: For audio testing.
• Порт РЈ45: For UTP cable testing.
• ВГА улаз: Connect to VGA sources.
• ХДМИ улаз: Повежите се на ХДМИ изворе.
• РС485 порт: For PTZ control.
• Контролна дугмад: Focus, Zoom, Menu, Directional Pad.

Сетуп

Пуњење уређаја

1. Connect the provided power adapter to the tester's USB Charge port.
2. Укључите адаптер у стандардну електричну утичницу.
3. The charging indicator will illuminate. A full charge typically takes 3-4 hours.
4. Ensure the device is fully charged before initial use for optimal battery life.

Укључивање/искључивање

• To power on, press and hold the power button (located on the top right) until the screen illuminates.
• Да бисте искључили уређај, притисните и држите дугме за напајање док се не појави упит за искључивање, а затим потврдите.

Упутство за употребу

Connecting a CCTV Camera (AHD/TVI/CVI/CVBS)

1. Ensure the CCTV camera is powered off.
2. Connect the BNC video cable from the camera to the "VIDEO IN" port on the tester.
3. If the camera requires power, connect a DC power cable from the camera to the tester's "DC12V OUT" port.
4. Power on the camera and the tester. The video feed should appear on the screen.
5. Use the menu to select the correct video format (AHD, TVI, CVI, CVBS) if auto-detection fails.

ПТЗ контрола

The tester supports Pelco-D/P protocols for PTZ camera control.

1. Connect the RS485 control wires from the PTZ camera to the tester's RS485 port.
2. Access the PTZ control menu on the tester.
3. Configure the camera's address and protocol settings to match the tester.
4. Use the directional buttons and Focus/Zoom controls to manipulate the PTZ camera.

UTP Cable Testing

1. Connect one end of the UTP cable to the RJ45 port on the tester.
2. Connect the other end of the UTP cable to the provided UTP terminator dongle.
3. Navigate to the UTP test function in the tester's menu.
4. The screen will display the cable connection status, type, and line sequence.

HDMI/VGA Input Mode

The tester can function as a monitor for HDMI or VGA sources.

1. Connect an HDMI or VGA cable from your source (e.g., DVR/NVR) to the corresponding input port on the tester.
2. Use the "VGA/HDMI switch" button or menu option to select the desired input.
3. The video from the external source will be displayed on the tester's screen.

Одржавање

• Чишћење: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or solvents.
• Складиштење: Уређај чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• Одржавање батерије: Да бисте продужили век трајања батерије, избегавајте често потпуно пражњење батерије. Редовно пуните уређај, чак и ако га не користите дуже време.
• Ажурирања фирмвера: Проверите произвођача website periodically for any available firmware updates.

Решавање проблема

Нема видео сигнала

• Проверите везе: Ensure all video cables are securely connected to both the camera and the tester.
• Напајање: Verify that the camera is receiving power, either from the tester's DC12V output or an external power source.
• Видео формат: Confirm that the tester's video format setting matches the camera's output (AHD, TVI, CVI, CVBS). Adjust in the menu if necessary.
• Функционалност камере: Test the camera with another known working monitor or DVR to rule out camera issues.

PTZ Control Not Responding

• РС485 веза: Ensure the RS485 wires are correctly connected (A to A, B to B).
• Protocol and Address: Verify that the PTZ protocol (Pelco-D/P) and camera address settings on the tester match the PTZ camera's configuration.
• Број бауда: Check if the baud rate setting on the tester matches the camera's baud rate.

Батерија се брзо празни

• Пуно пуњење: Ensure the device is fully charged (3-4 hours) before use.
• Дугме за напајање: As noted by some users, ensure the power button is not accidentally pressed while stored, which can drain the battery.
• Фактори животне средине: Екстремне температуре могу утицати на перформансе батерије.
• Старост батерије: Over time, rechargeable batteries naturally lose capacity.

Спецификације

Гаранција и подршка

For warranty information and technical support, please refer to the official POMIACAM webсајт или директно контактирајте њихову корисничку службу. Детаљи су обично наведени у документацији о куповини или на страници производа произвођача.

Произвођач: POMIACAM

Webсајт: Visit the POMIACAM Store on Amazon