AJ ENJOY 44-inch Outdoor Propane Gas Fire Pit Table Instruction Manual

1. Важне информације о безбедности

Please read and understand all instructions and warnings before assembling, operating, or servicing this fire pit table. Failure to follow these instructions could result in property damage, bodily injury, or death.

• Само за спољашњу употребу: This appliance is for outdoor use only. Do not use indoors or in any enclosed area.
• Одобрење: Maintain proper clearance from combustible materials. Ensure at least 36 inches (91 cm) from the top and sides to any combustible surfaces.
• вентилација: Ensure proper ventilation. Do not obstruct the airflow around the appliance.
• Само пропан гас: Use only liquid propane (LP) gas. Do not use natural gas or any other fuel.
• Провера цурења: Perform a leak test on all gas connections before initial use and after any tank change.
• Деца и кућни љубимци: Keep children and pets away from the fire pit table, especially during operation.
• Вруће површине: Surfaces will be hot during and after use. Do not touch hot surfaces until they have cooled completely.
• Никада не остављајте без надзора: Never leave the fire pit table unattended while in operation.
• Хитан случај: In case of a gas leak or fire, immediately turn off the gas supply at the tank and evacuate the area.

2. Производ је готовview

The AJ ENJOY 44-inch Outdoor Propane Gas Fire Pit Table provides a warm and inviting ambiance for your outdoor living space. It features a durable PE rattan base, a stylish marble-patterned tile tabletop, and a central fire pit with a glass wind guard. The unit operates on a standard propane tank and includes an auto-ignition system for ease of use.

3. Подешавање и монтажа

While some components are pre-assembled, final assembly of the fire pit table is required. It is recommended to have two people for assembly. Ensure all parts are present and undamaged before beginning.

Потребни алати (нису укључени):

• Пхиллипс шрафцигер
• Подесиви кључ

Кораци склапања:

1. Распакујте компоненте: Пажљиво извадите све делове из паковања. Положите их на меку, чисту површину како бисте спречили огреботине.
2. Assemble Base Panels: Connect the PE rattan side panels using the provided hardware. Ensure the access door panel is correctly positioned for propane tank access.
3. Причврстите плочу стола: Secure the marble-patterned tile tabletop to the assembled base.
4. Install Burner Assembly: Place the stainless steel burner assembly into the designated opening in the tabletop.
5. Повезивање гасовода: Connect the gas hose from the burner to the regulator. Ensure all connections are tight.
6. Place Glass Rocks: Distribute the mixed color glass rocks evenly around the burner, ensuring not to cover the ignition screen.
7. Install Glass Wind Guard: Assemble and place the glass wind guard around the fire pit opening. Do not overtighten the fasteners.
8. Insert Propane Tank: Open the access door, place a standard 20 lb propane tank (not included) inside the base, and connect the regulator hose to the tank valve. Tighten securely.
9. Извршите тест цурења: Before first use, apply a soapy water solution to all gas connections. If bubbles appear, there is a leak. Tighten connections and retest. Do not use if leaks persist.

4. Упутство за употребу

Паљење ватре:

1. Уверите се да је вентил резервоара за пропан потпуно отворен.
2. Locate the control panel on the side of the fire pit table.
3. Push and turn the control knob counter-clockwise to the 'LOW' position.
4. Immediately press and hold the igniter button. You should hear a clicking sound and see a spark.
5. Once the flame ignites, continue to hold the control knob in for 15-20 seconds to allow the thermocouple to heat up and engage the safety valve.
6. Release the control knob. If the flame goes out, repeat steps 3-5.

Adjusting the Flame:

• To increase the flame height, turn the control knob further counter-clockwise towards 'HIGH'.
• To decrease the flame height, turn the control knob clockwise towards 'LOW'.

Turning Off the Fire Pit:

1. Turn the control knob clockwise to the 'OFF' position.
2. Close the valve on the propane tank completely.
3. Allow the unit to cool down completely before covering or moving.

5. Одржавање

Редовно одржавање осигурава дуготрајност и безбедан рад вашег стола за ватру.

• Чишћење: Clean the exterior surfaces with a soft cloth and mild soap solution. Avoid abrasive cleaners. For the marble tile tabletop, use a non-acidic cleaner.
• Glass Rocks: Periodically clean the glass rocks to remove soot or debris. Ensure they are completely dry before placing them back in the fire pit.
• Burner and Ignition System: Keep the burner ports and ignition screen clear of debris. Use a soft brush to clean if necessary.
• Складиштење: When not in use for extended periods, especially during harsh weather, cover the fire pit table with the provided waterproof cover. Store the propane tank in a well-ventilated outdoor area, away from direct sunlight and heat sources.
• Црево за гас и регулатор: Inspect the gas hose and regulator for any signs of damage, cracks, or excessive wear before each use. Replace if necessary.

КСНУМКС. Решавање проблема

If you encounter issues with your fire pit table, refer to the common problems and solutions below. For persistent problems, contact customer support.

Problem: Fire ignites but goes out when the control knob is released.

This usually indicates an issue with the thermocouple not sensing heat, causing the safety valve to close.

• Check Ignition Screen: Ensure the ignition screen (small metal plate with holes) is not covered by glass rocks. It must be visible for proper operation.
• Check Copper Wire Connection: The copper wire connected to the thermocouple might be loose. Gently tighten it with a wrench, but do not overtighten.

Problem: Fire cannot be ignited and no ticking sound is heard.

This often points to an issue with the igniter battery.

• Проверите инсталацију батерије: Loosen the cap of the igniter button and remove the battery. Ensure the positive (+) end of the battery is facing outward when reinserting.
• Уклоните заштитни филм: Verify that any protective film on the battery has been completely removed before installation.
• Замените батерију: If the battery is old or depleted, replace it with a new AAA battery.

7. Спецификације

8. Гаранција и подршка

For warranty information, product support, or to order replacement parts, please contact AJ ENJOY customer service. Keep your purchase receipt and model number (AJ5103-3) handy for faster service.

Контакт информације се обично могу наћи на произвођачевој webсајту или преко вашег продавца.