Увод
This manual provides detailed instructions for the setup, operation, and maintenance of your KOSUMOSU 9.7-inch 3D LED Neon Digital Wall/Desk Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Безбедносне информације
- Ensure the clock is powered by a 5V/1A AC adapter (not included). Using an incorrect power adapter may damage the device.
- Држите уређај даље од воде и окружења са високом влажношћу.
- Do not attempt to disassemble or repair the clock yourself. Contact customer service for assistance.
- Keep the remote control battery (CR2025) out of reach of children.
Садржај пакета
- KOSUMOSU 9.7-inch 3D LED Neon Digital Clock
- Remote Control (with CR2025 button battery)
- 3-meter USB Power Cable
- Десктоп Брацкет
- Wall Mounting Accessories (Dowel, Screws)
- Кориснички приручник (овај документ)
Сетуп
1. Прикључак за напајање
- Connect the provided 3-meter USB power cable to the clock's power input port.
- Plug the other end of the USB cable into a 5V/1A AC adapter (not included).
- Plug the AC adapter into a standard wall outlet. The clock will power on.
Note: The clock has a built-in super farad capacitor for time memory, providing approximately 2 hours of backup in case of power failure. This is not for regular power supply.
2. Батерија даљинског управљача
The remote control comes with a CR2025 button battery pre-installed. If the remote does not respond, check or replace the battery.
3. Опције монтаже
Слика: Позади view of the KOSUMOSU 3D LED Neon Digital Clock, illustrating the wall mounting holes and the location of the function buttons. The image also displays product specifications.
- Положај на радној површини: Attach the included desktop bracket to the bottom of the clock for stable placement on any flat surface.
- Монтажа на зид: Use the provided screws and dowels to securely mount the clock on a wall. The clock features keyhole slots on the back for easy hanging.
Упутство за употребу
The clock is primarily operated using the included remote control. There are also three function buttons on the back of the clock for basic adjustments.
Функције даљинског управљача
Image: The KOSUMOSU 3D LED Neon Digital Clock showing the time in vibrant colors, with its remote control positioned in front.
- КОМПЛЕТ: Enter/Exit setting mode.
- Стрелице горе/доле: Прилагодите вредности током подешавања.
- 12/24х: Пребацивање између 12-часовног и 24-часовног формата времена.
- АЛАРМНИ: Activate/Deactivate alarm, enter alarm setting mode.
- СНООЗЕ: Activate snooze function when alarm sounds.
- СВЕТЛО: Cycle through brightness levels (High/Medium/Low/Auto/Off).
- COLOR/MODE: Change display color modes (Neon, 7 separate colors, color gradient, custom).
- TEMP (℃/℉): Switch between Celsius and Fahrenheit temperature display.
- ДАТУМ: Display date, enter date setting mode.
Подешавање времена и датума
- Притисните тастер СЕТ button on the remote. The hour digits will flash.
- Користите UP и ДОВН arrows to adjust the hour.
- Притисните СЕТ поново да бисте прешли на минуте, а затим подесите помоћу ГОРЕ/ДОЉЕ.
- Наставите да притискате СЕТ да бисте се кретали кроз подешавања године, месеца и дана, подешавајући свако помоћу ГОРЕ/ДОЉЕ.
- Притисните СЕТ још једном да бисте изашли из режима подешавања.
- Да бисте прелазили између 12-часовног и 24-часовног формата, притисните 12/24Х дугме.
Постављање аларма
- Притисните тастер АЛАРМ button on the remote. The alarm hour digits will flash.
- Користите ГОРЕ/ДОЉЕ да подесите сат аларма.
- Притисните АЛАРМ again to set the alarm minutes, adjust with ГОРЕ/ДОЉЕ.
- Притисните АЛАРМ again to confirm and activate the alarm. An alarm icon will appear on the display.
- To deactivate the alarm, press АЛАРМ again until the icon disappears.
- Када се огласи аларм, притисните СНООЗЕ for an additional 5 minutes of sleep (up to 3 times).
Подешавање осветљености
Image: The KOSUMOSU 3D LED Neon Digital Clock illustrating its automatic dimming function via a built-in light sensor and remote control dimming with High, Medium, Low, and Off settings.
- Притисните тастер БРИГХТ button on the remote to cycle through brightness levels: High, Medium, Low, Auto, and Off.
- Аутоматско затамњивање: When set to "Auto", the clock's built-in light sensor will automatically adjust the brightness across 8 levels based on ambient light conditions.
Режими боја
Image: The KOSUMOSU 3D LED Neon Digital Clock showcasing different custom color and neon light options, highlighting its multi-color LED capabilities.
Image: The KOSUMOSU 3D LED Neon Digital Clock illustrating how to switch between various colors using the remote control, showing different color displays for day and night.
Притисните тастер COLOR/MODE button on the remote to cycle through different display color options:
- Neon Light: Dynamic, flashing neon light effect.
- Color Gradient: Smooth transitions between colors.
- 7 Separate Colors: Static display of individual colors.
- Custom Color Option: Allows selection of a specific color.
Loop Display (Time, Date, Temperature)
Image: The KOSUMOSU 3D LED Neon Digital Clock demonstrating its loop display feature, cycling through the current time, date (November 8th), and temperature (71°F).
To activate the loop display for time, date, and temperature, press the dedicated ЛООП button on the remote control (if available, otherwise it cycles automatically after setting date/temp display). The clock will automatically cycle through these displays.
Одржавање
- Очистите површину сата меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
- Ensure the clock is unplugged before cleaning.
- Replace the remote control battery (CR2025) as needed.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Сат се не укључује. | Нема напајања, неисправан адаптер или лабава веза. | Ensure the USB cable is securely connected and the 5V/1A AC adapter is plugged into a working outlet. Try a different adapter if available. |
| Даљински управљач не ради. | Remote battery is dead or incorrectly inserted. Obstruction between remote and clock. | Replace the CR2025 battery in the remote. Ensure there are no obstructions and point the remote directly at the clock. |
| Аларм се не оглашава. | Аларм није активиран или је јачина звука прениска (ако се може подесити). | Verify the alarm icon is displayed on the clock. Ensure the alarm time is set correctly. (Note: This model does not specify adjustable alarm volume). |
| Display is too bright/dim at night/day. | Brightness setting is not optimal. | Adjust brightness using the БРИГХТ button on the remote. Set to "Auto" for automatic adjustment based on ambient light. |
Спецификације
Image: A visual representation of the KOSUMOSU 3D LED Neon Digital Clock's dimensions and key specifications, including product weight, size, input voltage, and power supply requirements.
| Феатуре | Детаљ |
|---|---|
| Бранд | КОСУМОСУ |
| Модел | 9.7IN Neon Clock-ACD210C |
| Димензије производа | КСНУМКС к КСНУМКС к КСНУМКС цм (КСНУМКС к КСНУМКС к КСНУМКС инча) |
| Тежина производа | 154.22 г |
| Дисплаи Типе | Digital LED (3D effect) |
| Извор напајања | Corded Electric (5V/1A AC adapter, not included) |
| Дужина УСБ кабла | 3 метара |
| Временска меморија | Built-in super farad capacitor (approx. 2 hours) |
| Батерија за даљински управљач | ЦР2025 (укључено) |
| Опције монтаже | Table top, Wall mount |
| Посебне карактеристике | Alarm with snooze, Auto Dimmable (8 levels), Remote Dimmable (High/Medium/Low/Off), RGB Neon Colors (7 colors, gradient, custom), Large Display, Time/Date/Temperature display. |
| Материјал | Пластика |
Гаранција и корисничка подршка
The KOSUMOSU 9.7-inch 3D LED Neon Digital Wall/Desk Clock comes with a 2 година гаранције.
If you encounter any quality issues or require assistance with product usage or settings, please contact KOSUMOSU customer service immediately. We are committed to providing support and will guide you through troubleshooting or arrange for a replacement if necessary.
For support, please refer to the contact information provided with your purchase or visit the official KOSUMOSU webсајту.