Enthuze ENT-TD6000

Упутство за употребу Enthuze ENT-TD6000 јумп стартера и мултифункционалне преносне батерије

1. Увод и крајview

The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.

Кључне карактеристике укључују:

  • Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
  • Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
  • Мобилно напајање: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
  • LED Light Functions: Features multiple LED light modes for illumination and signaling.
Enthuze Jump Starter and Multifunction Power Bank with accessories

Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.

2. Подешавање и почетна употреба

2.1 Пуњење уређаја

Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.

2.2 Connecting Jump Start Cables

To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.

Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.

3. Упутство за употребу

3.1 Покретање возила скоком

  1. Уверите се да је стартер потпуно напуњен.
  2. Повежите паметну батерију цлamp to the jump starter.
  3. Причврстите црвени (+) цлamp на позитивни пол акумулатора возила.
  4. Причврстите црни (-) цлamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
  5. Press the switch button on the jump starter to activate the jump-start function.
  6. Покрените мотор возила.
  7. Чим се возило покрене, одмах уклоните кљ.amps from the vehicle battery, then disconnect the smart battery clamp од јумп стартера.

This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.

3.2 Коришћење ваздушног компресора

  1. Screw the air hose into the designated port on the jump starter.
  2. Connect the other end of the air hose to the tire valve or the item to be inflated.
  3. Use the '+' or '-' buttons to set the desired air pressure.
  4. Press and hold the switch button for 3 seconds to start the inflation process.
  5. The device will automatically stop when the set pressure is reached.
  6. Disconnect the air hose from the item and the jump starter.

3.3 Коришћење као преносне батерије

The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:

  • УСБ излаз 1: 5V=3A, 9V=2A, 12V=1.5A
  • УСБ излаз 2: 5В=2.1А

Connect your device to the appropriate USB port using a compatible charging cable.

3.4 Функције ЛЕД светла

The device includes multiple LED light modes:

  • Стабилно светло: За опште осветљење.
  • СОС режим: За хитну сигнализацију.
  • Стробоскоп: For attracting attention.

Press the light button to cycle through the different modes.

4. Одржавање

To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:

  • Редовно пуњење: Пуните уређај свака 3-6 месеци, чак и ако се не користи, како бисте одржали здравље батерије.
  • Складиштење: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
  • Чишћење: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
  • Инспекција каблова: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Enthuze Jump Starter with accessories and warning labels

Figure 2: Product with accessories and important warnings.

КСНУМКС. Решавање проблема

Погледајте табелу испод за уобичајене проблеме и њихова решења:

Порука о грешциУзрокРешење
ГРЕШКАJumper cables connected with reversed polarity to the car battery.Повежите батерију цлamps to the correct positive and negative terminals.
ЛОВИсправно прикључен акумулатор аутомобила, али запремина батеријеtage is below 9V, and the core temperature is above 0°C/32°F.BOOST button for 2 seconds to use the forced boost function.
ОУТ ИНHigh-temperature protection activated, displaying core temperature overheating.The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F.
INLow-temperature protection activated.The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F.
СТАРТBuzzer sounding, silence after 30 seconds.Overcurrent detected, stop starting vehicle, disappear for 30S.
СТАРТVehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash.Stop starting the vehicle and the safety mode disappears after 10 minutes.

6. Спецификације

Detailed technical specifications for the Enthuze ENT-TD6000:

ПараметарВалуе
Назив производаСкочни стартер са ваздушним компресором
МоделENT-TD6000
Величина193 к 110 к 53 мм
Опсег притиска инфлације0.2-8 бара / 3-120 psi
Радна температураCharge: 0°C~45°C, Discharge: -10°C~45°C
Температура складиштења-10°Ц~50°Ц
Inflatable Hose Length435mm (including air nozzle)
Капацитет батерије41.44Вх (14.8В, 2.8Ах)
Воркинг НоисеМање од 80 дБ од 1 метра
Улаз за пуњење5В=3А
Време пуњењаОко 3.5 сата
УСБ излаз 15V=3A, 9V=2A, 12V=1.5A
УСБ излаз 25В=2.1А
Air Pressure Sensor Accuracy± 1пси
Старт Цар Волtage12В
Start Car Current500A (1000A Peak)
Table of basic parameters for Enthuze Jump Starter

Figure 3: Basic Parameters of the Enthuze ENT-TD6000.

7. Важна сигурносна упозорења

  • Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
  • Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
  • Интерну батерију пуните само у добро проветреном простору.
  • Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
  • Ризик од повреда особа. Немојте користити овај производ ако су кабл за напајање или каблови батерије на било који начин оштећени.
  • Овај уређај није намењен за употребу у комерцијалним сервисима.
  • Овај уређај је намењен за складиштење у затвореном простору када се не користи. Овај уређај се не сме складиштити нити остављати на отвореном када се не користи.
  • Овај уређај је намењен за привремену употребу на отвореном и треба бити опрезан када се овај уређај користи у влажним условима.

8. Гаранција и подршка

For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.

© 2023 Enthuze Automotive Products. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.