1. Увод
Thank you for choosing AWOL VISION DLP Link 3D Glasses. These active shutter glasses are designed to provide a bright, vivid, and immersive 3D viewing experience with compatible DLP-Link 3D projectors. This manual will guide you through the setup, operation, and maintenance of your new 3D glasses.
Кључне карактеристике:
- Компатибилност: Designed for AWOL VISION LTV-2500, LTV-3000 Pro, LTV-3500 Pro, Vanish TV, and other DLP-LINK 3D projectors.
- Дуготрајна пуњива батерија: До 50 сати непрекидне употребе са једним пуњењем.
- Ергономски дизајн: Lightweight (28 grams) and comfortable, suitable for extended wear and compatible with prescription glasses.
- Широко Viewугао угла: 178° for distortion-free viewинг.
- Bright & Vivid: Less than 1.5 ms response time and 38% high transmittance for clear, lossless 3D effects.


2. Садржај пакета
Уверите се да су све ставке присутне у кутији:
- AWOL VISION DLP Link 3D Glasses
- Glasses wipe
- УСБ кабл за пуњење
- Glasses Storage Case
- Glasses Storage Bag
- Упутство за употребу (овај документ)

3. Производ је готовview
Familiarize yourself with the components of your AWOL VISION 3D Glasses:

- Прекидач: Located on the top of the frame, used for powering on/off and 3D image reversal.
- Liquid Crystal Lens: The active shutter lenses that create the 3D effect.
- Прозор за пријем сигнала: Receives the DLP-Link synchronization signal from the projector.
- УСБ пуњач: За пуњење унутрашње батерије.
- Кука за уши: Provides a secure and comfortable fit.
4. Подешавање
Пуњење наочара:
Before first use, fully charge your 3D glasses. Connect the provided USB charging cable to the USB charging port on the glasses and to a standard USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status. A full charge typically takes 2-3 hours and provides up to 50 hours of continuous use.
Connecting to a DLP-Link 3D Projector:
These glasses automatically synchronize with DLP-Link 3D projectors. No manual pairing is required. Ensure your projector is set to output 3D content.
For detailed instructions on how to watch 3D movies with AWOL VISION 3D glasses, please refer to the video below:
5. Упутство за употребу
Укључивање/искључивање:
- Укључено: Press the power button once. The LED indicator will light up.
- Искључивање: Press and hold the power button for 3 seconds until the LED indicator flashes three times and turns off.
Note: The glasses will power off automatically after 5 minutes without an IR signal to conserve battery.
3D Reversal:
If the 3D effect appears inverted (e.g., background in foreground), tap the power button to switch the direction of the 3D image sequence between left-to-right and right-to-left. This can resolve issues where the 3D image is not correctly aligned.

6. Одржавање
Чишћење:
Use the provided glasses wipe or a soft, lint-free cloth to clean the lenses. Avoid using abrasive cleaners or solvents that could damage the lens coating.
Складиштење:
When not in use, store the 3D glasses in the provided storage case or bag to protect them from dust, scratches, and physical damage. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Одржавање батерије:
To prolong battery life, avoid fully discharging the glasses frequently. Recharge them when the battery is low. If storing for an extended period, charge the glasses to about 50% every few months.
КСНУМКС. Решавање проблема
- No 3D Effect / Blurred Image:
- Ensure the glasses are powered on.
- Verify your projector is outputting 3D content and is compatible with DLP-Link technology.
- Tap the power button on the glasses to perform a 3D reversal, as the image sequence might be incorrect.
- Check if the content being played is indeed 3D.
- Ensure the glasses are charged.
- Glasses Not Turning On:
- Charge the glasses for at least 30 minutes.
- Уверите се да је дугме за напајање чврсто притиснуто.
- Intermittent 3D Effect / Flickering:
- Ensure there are no obstructions between the glasses and the projector's 3D signal emitter.
- Check for strong ambient light sources that might interfere with the signal.
- Ensure the glasses are within the recommended viewing distance of the projector.
8. Спецификације
| Број модела ставке | ДГ-001 |
| Ленс Типе | Течни кристал са активним затварачем |
| Време одговора | < 1.5 мс |
| Пропустљивост светлости | 38% |
| Трајање батерије | До 50 сати (континуирана употреба) |
| Тежина | 28 грама (0.99 унци) |
| Воркинг Дистанце | До 26.2 стопа (8 м) |
| Ратед Инпут | Једносмерна струја 5V - 1A |
| Радна температура | 0°C - 45°C (32°F - 113°F) |
| Температура складиштења | -10°C - 60°C (14°F - 140°F) |

9. Гаранција и подршка
AWOL VISION is committed to providing excellent customer service and product quality.
- 30-дневна заштита цене: Ensures you get the best value.
- 2 Years Product Support: Dedicated support for your product.
Контактирајте подршку:
- Телефон / WhatsApp: +1 (888) 891-6866
- Емаил: суппорт@аволвисион.цом
