Упутство за употребу кућишта JONSBO N2 NAS ITX

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO N2 NAS ITX Case. The JONSBO N2 is a compact aluminum chassis designed for Network Attached Storage (NAS) or mini PC builds, supporting up to five 3.5-inch hard disk drives and one 2.5-inch solid-state drive.

Image 1.1: JONSBO N2 NAS ITX Case with internal drive bays highlighted.

2. Подешавање и инсталација

Follow these steps to assemble your JONSBO N2 NAS ITX Case with your components.

2.1. Припрема

Before beginning, ensure you have the following components:

• ИТКС матична плоча
• SFX Power Supply (maximum 150mm length)
• 3.5-inch Hard Disk Drives (up to 5)
• 2.5-inch Solid State Drive (1)
• Лов Проfile PCI Expansion Card (optional, maximum 197mm length)
• CPU Cooler (maximum 65mm height)
• Сет шрафцигера
• Cable ties for management

2.2. Case Disassembly

The JONSBO N2 features a removable top cover and a magnetic front panel for easy access.

1. Gently pull the magnetic front panel to detach it from the chassis.
2. Remove the screws securing the top cover and slide it off to expose the motherboard tray.

Image 2.1: Front panel removed, showing drive bays.

2.3. Motherboard and CPU Cooler Installation

1. Install your ITX motherboard onto the motherboard tray using the provided standoffs and screws.
2. Install your CPU cooler. Ensure its height does not exceed 65mm to allow the top cover to close properly.

2.4. Инсталација напајања

1. Mount the SFX power supply into its designated bracket. The power supply should not exceed 150mm in length.
2. Причврстите напајање завртњима.

2.5. Инсталација диск јединице

The JONSBO N2 supports five 3.5-inch hot-swappable HDDs and one 2.5-inch SSD.

1. 3.5-inch HDDs: Attach the provided handles and rubber slides to each 3.5-inch HDD. Slide each drive into an available hot-swappable bay until it clicks into place.
2. 2.5-inch SSD: Mount the 2.5-inch SSD in its dedicated slot, typically located behind the motherboard tray or within the drive cage structure.
3. Connect SATA data and power cables to all installed drives.

Слика 2.2: Расклопљено view illustrating component and drive installation.

2.6. Инсталација картице за проширење

If using a low-profile PCI expansion card:

1. Remove the appropriate PCI slot cover from the rear of the case.
2. Insert the low-profile expansion card into the motherboard's PCI-E slot. The card length must not exceed 197mm.
3. Причврстите картицу завртњем.

2.7. Front Panel and Cooling Connections

1. Connect the front panel headers (USB 3.2 Gen2 Type-C, USB 3.0, Audio+Mic, Power/Reset) to the corresponding pins on your motherboard.
2. Ensure the pre-installed rear 120mm fan is connected to a fan header on your motherboard for proper cooling.

2.8. Cable Management and Reassembly

1. Route all cables neatly to ensure optimal airflow and prevent interference with components. Use cable ties as needed.
2. Slide the top cover back into place and secure it with screws.
3. Reattach the magnetic front panel.

3. Упутство за употребу

3.1. Укључивање/искључивање

Press the power button located on the front panel to turn the system on or off. Follow your operating system's shutdown procedures for safe power-off.

3.2. Hot-Swapping Drives

The JONSBO N2 supports hot-swapping for its 3.5-inch HDD bays. Ensure your motherboard and operating system are configured to support hot-swapping before attempting this procedure.

1. Безбедно избаците диск из оперативног система.
2. Gently pull the handle of the desired drive bay to release and remove the drive.
3. Insert a new 3.5-inch HDD into the empty bay, ensuring it slides in smoothly until it locks into place.
4. The operating system should detect the new drive.

4. Одржавање

Regular maintenance helps ensure the longevity and optimal performance of your JONSBO N2 case and its components.

4.1. Чишћење

1. Екстеријер: Wipe the aluminum exterior with a soft, damp тканина. Избегавајте абразивна средства за чишћење.
2. Филтери за прашину: The case includes dust filters. Periodically remove and clean them with water or compressed air. Ensure they are completely dry before reinstallation.
3. Унутрашње компоненте: Use compressed air to gently remove dust from internal components, especially the fan blades and heatsinks. Perform this with the system powered off and unplugged.

Image 4.1: Rear fan and filter assembly.

4.2. Вентилација

Ensure that all ventilation grilles on the case are unobstructed to maintain proper airflow and prevent overheating. Avoid placing the case in enclosed spaces without adequate air circulation.

Image 4.2: Product details including ventilation grille and rear fan.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your JONSBO N2 case.

5.1. Нема снаге

• Verify that the power supply is securely connected to the wall outlet and the motherboard.
• Check that the front panel power button header is correctly connected to the motherboard.
• Ensure the power supply unit (PSU) switch is in the 'ON' position.

5.2. Excessive Fan Noise

• Check if the fan blades are obstructed by cables or dust.
• Уверите се да је вентилатор безбедно монтиран и да не вибрира у односу на кућиште.
• If the stock 120x15mm fan is too loud, consider replacing it with a quieter aftermarket fan of the same dimensions.

5.3. Drive Not Detected

• Ensure all SATA data and power cables are securely connected to both the drives and the motherboard/PSU.
• For 3.5-inch HDDs, confirm they are fully seated in their hot-swappable bays.
• Check your motherboard's BIOS/UEFI settings to ensure SATA ports are enabled.

5.4. Прегревање

• Verify that the rear 120mm fan is operating correctly.
• Побољшајте управљање кабловима како бисте смањили ометање протока ваздуха.
• Ensure the case's ventilation grilles are clear of obstructions.

6. Спецификације

Detailed technical specifications for the JONSBO N2 NAS ITX Case:

Image 6.1: Chassis parameters and dimensions.

7. Гаранција и подршка

JONSBO products are manufactured to high-quality standards. For specific warranty information regarding your JONSBO N2 NAS ITX Case, please refer to the warranty card included with your purchase or visit the official JONSBO webсајту.

If you encounter any issues or require technical assistance, please contact JONSBO customer support through their official channels. Provide your product model (N2) and a detailed description of the issue for efficient service.