Увод
This manual provides essential information for the installation, operation, and maintenance of your YIYIBYUS Sine Wave Controller. Designed for 60V-72V electric bikes with brushless motors, this controller ensures efficient power delivery and motor protection. Please read these instructions carefully before use to ensure proper function and safety.
The YIYIBYUS Sine Wave Controller is engineered for high performance, featuring robust construction and advanced control algorithms. It is suitable for various electric bike applications, including electric motorcycles and other electric vehicles.
Карактеристике производа
- Waterproof and Heat Dissipation: All screws are fixed with waterproof thermal conductive glue, enhancing both water resistance and heat dissipation for improved durability.
- High-Efficiency Performance: Utilizes high-quality components to optimize work efficiency, providing powerful starts and strong climbing capability with reduced motor noise.
- Заштита батерије: Automatically adjusts current when battery voltage drops, protecting the battery, extending its lifespan, and increasing the vehicle's running distance.
- Motor Phase Protection: In the event of a motor phase failure, the sine wave controller will protect the motor from burning out and simultaneously safeguard the battery.
Шта је у кутији
Приликом распакивања, проверите да ли су све компоненте присутне и да ли су оштећене.
- 1x YIYIBYUS Sine Wave Controller
Image: The YIYIBYUS Sine Wave Controller, showing its main body and numerous colored wire connectors for various functions.
Спецификације
| Бранд | ИИИИБИУС |
| Назив модела | Контролер синусног таласа |
| Ватtage | 3000 вати |
| Волtagе Распон | 60В-72В |
| Материјал | Пластика, метал |
| Боја | Црно |
| Димензије | 8.82 к 4.41 к 1.97 инча (22.4 к 11.2 к 5 цм) |
| Специфичне употребе | Electric motorcycles and electric vehicles |
| Извор напајања | Батерија |
| GTIN (UPC) | 724443885764 |
Image: The YIYIBYUS Sine Wave Controller with measurements indicating its length (220mm/8.66"), width (120mm/4.72"), and height (60mm/2.36").
Подешавање и инсталација
Proper installation is crucial for the safe and efficient operation of the controller. If you are unsure about any steps, consult a qualified technician.
- Безбедност на првом месту: Ensure the electric bike's power is completely off and the battery is disconnected before beginning installation.
- Монтажа: Securely mount the controller in a location that is protected from direct impact and excessive moisture, allowing for adequate airflow for cooling.
- Ожичење: Carefully connect all wires according to the provided wiring diagram. Pay close attention to polarity and ensure all connections are firm and insulated.
- Motor Hall Sensor: Connect the motor Hall sensor wires to the corresponding port on the controller.
- Напајање: Connect the main power wires from the battery to the controller, ensuring correct voltagе (60В-72В).
- Прикључци додатне опреме: Connect throttle, brake levers, display, and other accessories as required by your electric bike's configuration.
- Иницијална провера: Before fully powering on, double-check all connections for correctness and security.
Image: A detailed wiring diagram illustrating the various connections on the sine wave controller, including soft/hard start, power selection, burglar alarm, key switch, throttle, reversing, cruise, anti-theft, high/low speed, meter, high-level brake, low-level brake, and motor Hall sensor.
Упутство за употребу
Once installed, the controller manages the power delivery to your electric bike's motor.
- Укључено: Turn on the electric bike's main power switch. The controller will perform a self-check.
- Контрола гаса: Use the throttle to control the motor's speed. The sine wave output ensures smooth and quiet acceleration.
- кочење: Engage the brake levers to activate the motor cut-off function, which stops power to the motor for safe deceleration.
- Режими брзине: If your bike is equipped with high/low speed selection, use the corresponding switch to adjust the maximum speed output.
- Cruise Function: If available, activate the cruise control feature for maintaining a constant speed without continuous throttle input.
- Праћење батерије: Regularly monitor your battery level via the bike's display. The controller's battery protection feature will reduce current as voltage drops to extend range.
Одржавање
Regular maintenance helps ensure the longevity and optimal performance of your controller.
- Одржавати уредним одржавати чистим: Periodically clean the exterior of the controller to prevent dust and debris buildup, which can hinder heat dissipation. Use a dry cloth.
- Прегледајте везе: Annually, or if issues arise, inspect all wire connections for corrosion, looseness, or damage. Ensure waterproof seals are intact.
- Избегавајте прегревање: Ensure the controller is not covered or obstructed during operation to allow for proper cooling.
- Изложеност води: While waterproof, avoid submerging the controller or exposing it to high-pressure water jets.
Решавање проблема
Ако наиђете на проблеме, погледајте следеће уобичајене кораке за решавање проблема:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Motor not starting or intermittent power. | Loose wiring connection, faulty Hall sensor, low battery voltage. | Check all wire connections, especially the motor Hall sensor and main power. Ensure battery is adequately charged. |
| Motor runs but with reduced power or unusual noise. | Motor phase issue, incorrect speed setting, controller overheating. | Verify motor phase connections. Check for obstructions around the controller. Ensure the correct speed mode is selected. |
| Контролер не реагује. | No power supply, faulty key switch, internal controller fault. | Confirm battery is connected and charged. Test the key switch. If issues persist, contact support. |
If troubleshooting does not resolve the issue, please contact customer support for further assistance.
Гаранција и подршка
The YIYIBYUS Sine Wave Controller comes with a limited warranty of 90 days from the date of purchase. This warranty covers manufacturing defects under normal use conditions.
For warranty claims, technical support, or any questions regarding your product, please contact YIYIBYUS customer service. Provide your purchase details and a clear description of the issue to expedite assistance.
Контакт информације: Погледајте документацију о куповини или упутства продавца webсајт за најновије контакт информације за корисничку подршку.