Atlanta Digital LED Alarm Clock 2604/0 User Manual

Увод

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Сетуп

1. Прикључак за напајање

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. Резервна батерија

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

Слика: Позади view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

Упутство за употребу

1. Подешавање времена

1. Притисните и држите ВРЕМЕНСКИ СКЛОП button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. Користите 12/24ХР button (left side of the back panel) to adjust the hours.
3. Притисните тастер ВРЕМЕНСКИ СКЛОП button again to switch to minute adjustment. Use the 12/24ХР тастер за подешавање минута.
4. Притисните тастер ВРЕМЕНСКИ СКЛОП дугме још једном да бисте потврдили и изашли из режима подешавања времена.

To switch between 12-hour and 24-hour display formats, briefly press the 12/24ХР button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. Подешавање аларма

The clock supports two separate alarms.

1. Притисните и држите АЛАРМ СЕТ button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. Користите 12/24ХР button to adjust the alarm hours.
3. Притисните тастер АЛАРМ СЕТ button again to switch to minute adjustment. Use the 12/24ХР дугме за подешавање минута аларма.
4. Притисните тастер АЛАРМ СЕТ дугме још једном да бисте потврдили и изашли из режима подешавања аларма.
5. To activate or deactivate an alarm, briefly press the AL. ON/OFF button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

The alarm features a Цресцендо function, meaning the alarm sound starts softly and gradually increases in intensity.

3. Функција одлагања

Када се огласи аларм, притисните велико СНООЗЕ button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. Подешавање осветљености екрана

Подесите осветљеност екрана помоћу ДИММЕР slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. Alarm Volume Adjustment

Adjust the alarm sound volume using the ВОЛУМЕ slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. УСБ порт за пуњење

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

Одржавање

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Држите уређај даље од воде и високе влажности.
• Избегавајте излагање сата директној сунчевој светлости или екстремним температурама.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

Решавање проблема

Display is too bright or too dim:

Подесите ДИММЕР slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

Аларм се не оглашава:

• Check if the alarm is activated using the AL. ON/OFF button. An indicator should be visible on the display.
• Осигурајте ВОЛУМЕ slider is not set to "LOW" or minimum.
• Проверите да ли је време аларма правилно подешено.

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

Спецификације

Гаранција и подршка

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.