ZÜNDAPP Kingmeter LED Display T320 Green 1.0 / Z101 / Z101+ User Manual

Увод

This manual provides essential information for the proper installation, operation, and maintenance of your ZÜNDAPP Kingmeter LED Display. This display is compatible with ZÜNDAPP Green 1.0, Z101, and Z101+ electric bicycles manufactured from July 2021 onwards. Please read these instructions carefully before use to ensure optimal performance and safety.

Производ је завршенview

The ZÜNDAPP Kingmeter LED Display serves as the central control unit for your electric bicycle, providing critical information and allowing you to manage assistance levels.

слика: Фронт view of the ZÜNDAPP Kingmeter LED Display, showing the power button, assist level buttons (+/-), and light control button. LED indicators for power and assist levels are visible at the top.

The display unit includes:

• ЛЕД индикатори: For battery charge level and pedal assistance level.
• Контролна дугмад: Four buttons for power, assistance level adjustment, and light control.
• Кабл: A 220 mm cable with a 5-pin round BUS connector.

Подешавање и инсталација

Follow these steps to properly install the Kingmeter LED Display on your electric bicycle.

1. Монтажа дисплеја:

   The display features a 22.2 mm clamp, suitable for most standard bicycle handlebars. Position the display on your handlebar in a location that is easily accessible and visible while riding, without obstructing other controls. Securely tighten the clamp шрафови.

   

   слика: Крупни план view of an electric bicycle handlebar with the ZÜNDAPP Kingmeter LED Display mounted. The display is centrally positioned for easy access and visibility.

2. Повезивање кабла:

   Locate the corresponding 5-pin round BUS connector on your electric bicycle's wiring harness. Carefully align the pins and push the display's connector firmly into place until it clicks. Ensure a secure connection to prevent moisture ingress and signal loss.

   

   слика: Детаљно view of the 5-pin round BUS connector, showing the pin configuration. This connector is used to link the display to the e-bike's electrical system.

   

   слика: The rear side of the ZÜNDAPP Kingmeter LED Display, showing the integrated cable and a sticker indicating "36V", confirming its voltagе компатибилност.

Упутство за употребу

The Kingmeter LED Display features a simple 4-button interface for easy operation.

слика: Јасно view of the ZÜNDAPP Kingmeter LED Display, highlighting the four control buttons: Power (red), Plus (+), Minus (-), and Light (headlight icon). LED indicators for battery and assist levels are also visible.

• Укључивање/искључивање: Притисните и држите црвено дугме за напајање (⑂) to turn the display and the e-bike system on or off.
• Adjusting Assistance Level:
  • Притисните тастер Дугме „+“ to increase the pedal assistance level.
  • Притисните тастер Дугме „-“ to decrease the pedal assistance level.
  • The current assistance level (0, 1, 2, 3) is indicated by the LED lights. Level 0 means no assistance.
• Контрола светла: Притисните тастер дугме за светло (🚲) to turn your e-bike's lights on or off.
• Индикатор нивоа батерије: The "POWER" LED indicators at the top of the display show the remaining battery charge. "LOW" indicates a low battery level.

Одржавање

To ensure the longevity and proper functioning of your Kingmeter LED Display, follow these simple maintenance guidelines:

• Чишћење: Wipe the display surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic and electronic components.
• Заштита од влаге: While the display is designed for outdoor use, avoid prolonged exposure to heavy rain or direct water jets. Ensure the connector is always securely fastened.
• Инспекција каблова: Periodically check the cable and connector for any signs of wear, damage, or corrosion. Replace if necessary.
• Складиштење: Када се електрични бицикл не користи дуже време, чувајте га и изложите га на сувом и умерено хладном месту.

Решавање проблема

If you encounter issues with your Kingmeter LED Display, refer to the following common problems and solutions:

If you cannot resolve the issue using the troubleshooting guide, please contact ZÜNDAPP customer support or an authorized service center.

Спецификације

Гаранција и подршка

For warranty information, please refer to the documentation provided with your electric bicycle or contact your point of purchase. For technical support or service inquiries, please visit the official ZÜNDAPP webсајту или се обратите њиховом одељењу за корисничку подршку.

Напомена: Unauthorized modifications or repairs may void your warranty.