1. Увод
This manual provides essential information for the installation, operation, and maintenance of your DEVMO Ambient Air Temperature Sensor, model 80525S30941. This sensor is designed to accurately measure the outside ambient air temperature for your vehicle's climate control and engine management systems. It is a direct replacement part manufactured from high-quality ABS plastic for durability and long-lasting performance.

Image 1.1: The DEVMO Ambient Air Temperature Sensor, model 80525S30941, showing its overall design.
2. Компатибилност
This sensor is compatible with various vehicle models. Please verify your vehicle's specific requirements before installation.
- RL, ILX, RDX, TL, RSX, MDX
- Accord (2011-2012), Accord Crosstour (2011)
- Civic (2011-2013)
- CR-V (2013-2014)
- CR-Z (2013-2014)
- Insight (2012-2014)
- Odyssey, Pilot, S2000
- Ridgeline (2012-2014)
- Fit (2013-2014)
Број резервног дела: 80525-S30-941 / 80525S30941.
3. Подешавање и инсталација
The DEVMO Ambient Air Temperature Sensor is designed for direct replacement. Professional installation is recommended. Always consult your vehicle's service manual for specific instructions regarding sensor location and removal procedures.
- Безбедност на првом месту: Ensure the vehicle is turned off and the battery is disconnected before beginning any work to prevent electrical hazards.
- Пронађите стари сензор: Refer to your vehicle's service manual to identify the exact location of the existing ambient air temperature sensor. This is typically located near the front bumper, grille, or radiator support.
- Искључите ожичење: Carefully disconnect the electrical connector from the old sensor. Avoid pulling directly on the wires.
- Уклоните стари сензор: Unmount the old sensor from its bracket or housing. This may involve unbolting, unclipping, or twisting the sensor.
- Инсталирајте нови сензор: Position the new DEVMO sensor in the same location and secure it using the original mounting hardware or clips.
- Повежите ожичење: Reconnect the electrical connector to the new sensor, ensuring a secure and snug fit.
- Поново повежите батерију: Поново повежите акумулатор возила.
- Тест функционалност: Start the vehicle and verify that the ambient air temperature reading on your dashboard or climate control system is accurate.

Слика 3.1: Крупни план view of the sensor's electrical connector pins, ensuring proper connection.

Слика 3.2: View of the sensor's mounting flange, designed for secure installation.
4. Операција
The DEVMO Ambient Air Temperature Sensor continuously monitors the temperature of the air outside your vehicle. This data is crucial for several vehicle systems, including:
- Контрола климе: Provides input for automatic climate control systems to adjust cabin temperature.
- Engine Management: Assists the engine control unit (ECU) in optimizing fuel mixture and engine performance based on ambient conditions.
- Dashboard Display: Displays the outside temperature on your vehicle's instrument cluster.

Image 4.1: Diagram illustrating the location and function of various sensors within a vehicle, including temperature sensors.
5. Одржавање
The DEVMO Ambient Air Temperature Sensor is designed for minimal maintenance. However, periodic inspection can help ensure its longevity and accurate performance:
- Визуелни преглед: Periodically check the sensor for any visible damage, corrosion, or debris accumulation.
- чистоћа: If accessible, gently clean any dirt or road grime from the sensor's exterior using a soft cloth. Avoid harsh chemicals or abrasive materials.
- Провера ожичења: Ensure the electrical connector remains securely attached and that the wiring is free from fraying or damage.
КСНУМКС. Решавање проблема
If you experience issues with your ambient air temperature readings, consider the following troubleshooting steps:
- Incorrect Temperature Display:
- Verify the sensor is securely connected.
- Check for any visible damage to the sensor or its wiring.
- Ensure the sensor is not obstructed by debris or positioned in a location that would give an inaccurate reading (e.g., too close to the engine heat).
- No Temperature Reading:
- Confirm the electrical connector is fully seated.
- Inspect the wiring for breaks or disconnections.
- A diagnostic scan tool may be required to check for fault codes related to the sensor.
If problems persist after basic troubleshooting, professional automotive diagnosis and repair may be necessary.
7. Спецификације
| Феатуре | Спецификација |
|---|---|
| Бранд | DEVMO |
| Број модела | 80525С30941 |
| Материјал | акрилонитрил бутадиен стирен (АБС) |
| Тежина артикла | 0.08 килограма (приближно 2.82 унце) |
| Прецизност мерења | ±1.5% |
| Меасуринг Ранге | -40 to 250 degrees Celsius (-40 to 482 degrees Fahrenheit) |
| Тип монтаже | Фланге Моунт |
| Оутпут Типе | Push Button (refers to connector type) |
| Број дела произвођача | 80525С30941 |
| УПЦ | 765147955322 |
8. Гаранција и подршка
This DEVMO Ambient Air Temperature Sensor comes with a 12-месечна гаранција од дана куповине.
For any questions, concerns, or warranty claims, please contact DEVMO customer support directly through the Amazon Message system. Please provide your order details and a description of the issue for prompt assistance.