Zurn P6900-B-L

Zurn P6900-B-L AquaSense Electronics Module with Solenoid Instruction Manual

Model: P6900-B-L | Brand: Zurn

1. Увод

The Zurn P6900-B-L AquaSense Electronics Module with Solenoid is a replacement component designed for Zurn AquaSense sensor faucets, specifically models Z6912, Z6913, Z6915, and Z6920. This module integrates the solenoid valve, battery pack, and the necessary wiring to connect to the faucet's infrared proximity sensor, enabling hands-free operation. This manual provides instructions for proper installation, operation, and maintenance of the module.

2. Безбедносне информације

  • Увек искључите довод воде до славине пре почетка било какве инсталације или одржавања.
  • Disconnect electrical power if applicable before servicing.
  • Носите одговарајућу личну заштитну опрему, као што су заштитне наочаре и рукавице.
  • Уверите се да су сви спојеви безбедни како бисте спречили цурење.
  • Старе батерије одлажите одговорно у складу са локалним прописима.

3. Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

  • Zurn P6900-B-L AquaSense Electronics Module with Solenoid
  • Battery Pack (integrated)
  • 4 AA алкалне батерије (укључене)
  • Connecting Wire to Faucet Sensor
  • Small Hex Key/Wrench (for securing connections, if applicable)
  • O-ring (for sealing connections, if applicable)
Zurn P6900-B-L Electronics Module with included batteries and hex key
Image 3.1: Zurn P6900-B-L Electronics Module with included batteries and hex key. This image displays the main module unit, four AA batteries, and a small hex key, which are typically included in the package.

4. Подешавање и инсталација

Follow these steps to install the Zurn P6900-B-L Electronics Module:

  1. Искључите довод воде: Locate the main water shut-off valve for the faucet and turn it off completely.
  2. Disconnect Old Module (if replacing): Carefully disconnect the existing electronics module from the faucet sensor and water lines. Be prepared for residual water.
  3. Prepare New Module: Ensure the new P6900-B-L module has the included 4 AA alkaline batteries properly installed in the battery compartment.
  4. Повежите водоводне цеви: Attach the solenoid valve portion of the new module to the appropriate hot and cold water supply lines. Use thread sealant tape or pipe dope as recommended by local plumbing codes. Ensure connections are hand-tight, then use a wrench for a final quarter-turn, avoiding overtightening.
  5. Повежите жицу сензора: Carefully connect the wire from the electronics module to the faucet's infrared proximity sensor. The connector pins are delicate; align them precisely to avoid bending. Removing any rubber o-ring on the connector might assist in feeling for a solid connection, as a coupler nut typically secures the pieces.
  6. Безбедносни модул: Mount or secure the electronics module in a suitable location, typically under the sink, ensuring it is protected from moisture and easily accessible for future maintenance.
  7. Обнова снабдевања водом: Slowly turn the main water supply back on and check for any leaks at all connection points.
  8. Пробни рад: Activate the faucet sensor to verify proper water flow and shut-off.
Доња страна view of Zurn P6900-B-L Electronics Module showing connection points
Слика 4.1: Доња страна view of Zurn P6900-B-L Electronics Module showing connection points. This image highlights the water inlet and outlet connections, as well as the sensor wire port on the module.

5. Упутство за употребу

The Zurn AquaSense Electronics Module controls water flow in conjunction with the faucet's infrared proximity sensor. To operate the faucet:

  • Активација: Place your hands within the detection range of the faucet's sensor. The sensor will detect your presence.
  • Проток воде: Upon detection, the electronics module will activate the solenoid valve, allowing water to flow from the faucet.
  • Деактивација: Remove your hands from the sensor's detection range. The module will then close the solenoid valve, stopping the water flow.

The system is designed for hands-free operation, promoting hygiene and water conservation.

6. Одржавање

Regular maintenance ensures optimal performance and longevity of your Zurn AquaSense Electronics Module.

6.1. Замена батерије

The module is powered by 4 AA alkaline batteries. When the batteries are low, the faucet may exhibit inconsistent operation or cease to function. To replace the batteries:

  1. Искључите довод воде: Искључите довод воде до славине.
  2. Приступ одељку за батерију: Locate the battery compartment on the electronics module. This is typically secured with a cover.
  3. Уклоните старе батерије: Open the compartment and remove the old AA batteries.
  4. Уметните нове батерије: Insert four new AA alkaline batteries, ensuring correct polarity (+/-).
  5. Безбедни одељак: Затворите и осигурајте поклопац одељка за батерију.
  6. Restore Water Supply and Test: Turn the water supply back on and test the faucet's operation.

6.2. Чишћење

Periodically inspect the module and connections for any signs of corrosion or debris. Clean the exterior of the module with a soft, damp тканина. Немојте користити абразивна средства за чишћење или раствараче.

КСНУМКС. Решавање проблема

If your Zurn AquaSense faucet is not functioning correctly, refer to the following table for common issues and solutions:

ПроблемМогући узрокРешење
No water flow when sensor is activatedСлабе или празне батерије
Искључен је довод воде
Sensor wire disconnected or damaged
Неисправност електромагнетног вентила
Замените батерије
Check water supply valve
Verify sensor wire connection
Contact Zurn support for solenoid replacement
Water flows continuouslyСензор је зачепљен или неисправан
Solenoid valve stuck open
Clean sensor lens; check for obstructions
Contact Zurn support for solenoid inspection/replacement
Слаб проток водеНизак притисак воде
Аератор зачепљен
Solenoid partially obstructed
Check building water pressure
Clean or replace faucet aerator
Contact Zurn support for solenoid inspection
Сензор не реагујеСлабе или празне батерије
Sensor lens dirty
Sensor wire disconnected or damaged
Замените батерије
Очистите сочиво сензора
Verify sensor wire connection

8. Спецификације

ФеатуреДетаљ
Назив моделаP6900-B-L
Парт НумберP6900-B-L
Тежина артикла1.12 фунти
Димензије производа6 к 4 к 3.2 инча
МатеријалПластика, метал
Батерије4 АА алкалне батерије (укључене)
Compatible FaucetsZ6912, Z6913, Z6915, Z6920 Series
Посебна карактеристикаБез олова
УПЦ670240576582

9. Гаранција и подршка

The Zurn P6900-B-L AquaSense Electronics Module is covered by a limited manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your original Zurn product or visit the official Zurn webсајту.

For technical support, replacement parts, or further assistance, please contact Zurn Customer Service:

  • Webсајт: ввв.зурн.цом
  • Контакт информације: Refer to the 'Contact Us' section on the Zurn webсајт за бројеве телефона и подршку путем е-поште.

© 2024 Zurn Industries. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.