Intelbras GX 3000 Wireless Mesh Router User Manual

1. Увод

The Intelbras GX 3000 is a multifunction wireless mesh router designed to provide high-speed internet connectivity via 5G/4G networks and Wi-Fi 6. This device integrates advanced Qualcomm technology for both its 5G modem and Wi-Fi 6 solution, ensuring high performance and reliability. It supports up to 128 devices simultaneously on the Wi-Fi network and offers wired connectivity options. The GX 3000 is suitable for various environments, from home to office, providing robust network performance.

This manual provides instructions for setting up, operating, and maintaining your Intelbras GX 3000 router. Please read it carefully before use.

2. Package Contents & Device Overview

2.1. Садржај пакета

• Intelbras GX 3000 Wireless Mesh Router
• Повер Адаптер
• Мрежни кабл
• Кратки водич (није укључен у овај приручник)

2.2. Девице Оверview

Слика 1: Предња страна View of the GX 3000 Router

This image displays the front of the Intelbras GX 3000 router, showing its sleek white design and LED indicators for 5G, 4G, call status, Wi-Fi, and WPS button.

Figure 2: GX 3000 Router with Highlighted Indicators and Ports

This image provides a closer look at the router, emphasizing the LED indicators on the front (5G, 4G, Call, Wi-Fi, WPS) and the various ports located on the rear panel, including LAN, WAN, and TEL ports.

2.2.1. Портови на задњој плочи

Figure 3: Rear Panel of the GX 3000 Router

This image shows the rear panel of the router, clearly displaying the LAN, WAN, and TEL ports for wired connections.

• ЛАН портови: For connecting wired devices such as computers, smart TVs, or gaming consoles.
• ВАН порт: For connecting to an external modem or internet source (if not using 5G/4G).
• ТЕЛ порт: For voice services (if supported by your service provider).
• Улазна снага: Повезује се са приложеним адаптером за напајање.

2.2.2. Bottom Panel Features

Figure 4: Bottom Panel Features of the GX 3000 Router

This diagram illustrates the bottom panel of the router, highlighting the TEST port, RESET button, and SIM CARD slot.

• TEST Port: For diagnostic purposes.
• Ресет: Used to restore factory default settings. Press and hold for 10 seconds while the device is powered on.
• SIM CARD Slot: Insert your 5G/4G SIM card here for mobile broadband connectivity.

3. Подешавање

3.1. Почетно смештање

Place the router in a central location within your desired coverage area, away from obstructions, metal objects, and other electronic devices that may cause interference. Ensure good ventilation around the device.

3.2. Уметање СИМ картице

1. Уверите се да је рутер искључен.
2. Locate the SIM CARD slot on the bottom panel of the router (refer to Figure 4).
3. Insert your activated 5G/4G SIM card into the slot with the gold contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. To remove, gently push the SIM card in again until it springs out.

3.3. Повезивање напајања

1. Connect one end of the power adapter to the Power Input port on the rear of the router.
2. Укључите други крај адаптера за напајање у стандардну електричну утичницу.
3. The router will power on automatically. Wait for the LED indicators to stabilize.

3.4. Wired Connections (Optional)

If you wish to connect devices via Ethernet:

1. Connect one end of the provided network cable to a LAN port on the rear of the router.
2. Connect the other end of the network cable to the Ethernet port of your computer, smart TV, or other wired device.

3.5. Initial Wi-Fi Connection

The default Wi-Fi network name (SSID) and password are usually printed on a label on the bottom of the router. Follow these steps to connect:

1. On your wireless device (smartphone, laptop, tablet), open the Wi-Fi settings.
2. Scan for available networks and select the SSID corresponding to your GX 3000 router.
3. Enter the default Wi-Fi password when prompted.
4. Once connected, you can access the router's web interface to customize settings.

4. Упутство за употребу

4.1. ЛЕД индикатори

ЛЕД диоде на предњој плочи пружају информације о статусу:

• 5Г ЛЕД: Показује статус 5G мреже.
• 4Г ЛЕД: Показује статус 4G мреже.
• Call LED: Indicates voice service status.
• Ви-Фи ЛЕД: Означава активност Wi-Fi мреже.
• ВПС ЛЕД: Indicates WPS function status.

Refer to the full user manual (if provided separately) for detailed LED behavior (e.g., solid, blinking, color) and their meanings.

4.2. Приступ Web Управљачки интерфејс

To configure advanced settings, manage your network, or change Wi-Fi credentials, access the router's web интерфејс:

1. Ensure your device is connected to the GX 3000's Wi-Fi network or via an Ethernet cable.
2. Отвори а web прегледач (нпр. Chrome, Firefox, Edge).
3. In the address bar, type the default IP address of the router (commonly 192.168.1.1 or 192.168.0.1) and press Enter. This information is usually on the label on the bottom of the router.
4. Enter the default username and password (also found on the router label).
5. You will now be in the router's management interface, where you can customize settings such as Wi-Fi name, password, security protocols, and more.

4.3. Заштићено подешавање Wi-Fi мреже (WPS)

WPS allows you to connect Wi-Fi devices without entering the password manually:

1. Press the WPS button on the front of the GX 3000 router (refer to Figure 1). The WPS LED will start blinking.
2. Within two minutes, press the WPS button on your client device (e.g., Wi-Fi adapter, printer).
3. Уређаји ће се аутоматски повезати.

Note: WPS is a convenient feature but may be less secure than manual password entry.

4.4. Mesh Network Expansion

The GX 3000 supports mesh networking to expand Wi-Fi coverage. You can add other compatible Intelbras Qi5 line products to create a seamless mesh network. Each additional Wi-Fi 6 router can extend coverage by up to 300 m². It is recommended to use up to 6 routers in the same mesh network for optimal performance.

Refer to the specific instructions provided with additional mesh units for pairing and configuration.

5. Одржавање

5.1. Чишћење уређаја

• Ensure the router is powered off and unplugged before cleaning.
• Користите меку, суву крпу да обришете спољашњост уређаја.
• Do not use liquid cleaners, aerosols, or solvents, as they may damage the casinг или унутрашње компоненте.
• Држите вентилационе отворе чистим од прашине и остатака.

5.2. Ажурирања фирмвера

Periodically check the Intelbras official website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided with the firmware update package carefully.

5.3. Resetting to Factory Defaults

If you encounter persistent issues or forget your login credentials, you can reset the router to its factory default settings:

1. With the router powered on, locate the RESET button on the bottom panel (refer to Figure 4).
2. Using a paperclip or a similar pointed object, press and hold the RESET button for approximately 10 seconds.
3. Release the button. The router will restart with all settings restored to their original factory defaults.
4. You will need to reconfigure your Wi-Fi settings and any other custom configurations after a factory reset.

КСНУМКС. Решавање проблема

7. Спецификације

8. Гаранција и подршка

8.1. Информације о гаранцији

Intelbras products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Intelbras webсајт. Сачувајте доказ о куповини за потребе гаранције.

8.2. Техничка подршка

If you require technical assistance or have questions not covered in this manual, please contact Intelbras customer support. You can find contact information (phone numbers, email, support portal) on the official Intelbras webсајт:

Intelbras Official Webсајт: ввв.интелбрас.цом.бр

When contacting support, please have your product model (GX 3000) and serial number ready.