Wattsaving EV Charger Instruction Manual

1. Увод

Thank you for choosing the Wattsaving EV Charger. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your electric vehicle charging station. Please read this manual thoroughly before using the product and retain it for future reference.

The Wattsaving EV Charger is designed to provide reliable and fast charging for electric vehicles equipped with a Type 2 charging port. It supports both three-phase (22kW/11kW) and single-phase (7kW/3.5kW) charging, offering versatility for various electrical installations and vehicle requirements.

2. Безбедносне информације

Your safety and the proper functioning of the charger are paramount. Observe all warnings and precautions listed below.

• Професионална инсталација: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes and regulations.
• Електрична опасност: Do not attempt to open, disassemble, repair, or modify the charger. High voltage is present inside, which can cause severe injury or death.
• Вода и влага: Although the charger has an IP65-rated enclosure, avoid submerging it in water or exposing it to excessive moisture. Ensure hands are dry when handling the charging cable and connector.
• Интегритет кабла: Regularly inspect the charging cable and connector for any signs of damage, wear, or fraying. Do not use the charger if the cable or connector is damaged.
• Хитно заустављање: In case of an emergency, immediately press the emergency stop button on the charger (if available) or disconnect power at the circuit breaker.
• Деца и кућни љубимци: Држите децу и кућне љубимце даље од станице за пуњење током рада.

The Wattsaving EV Charger incorporates multiple safety features, including:

• ЦЕ сертификат
• Type A Residual Current Device (RCD)
• Заштита од грома
• Оверволtagе Заштита
• Ундерволtagе Заштита
• Оверцуррент Протецтион
• Заштита од превисоке температуре
• Дугме за хитно заустављање

3. Производ је готовview

Image 1: Wattsaving EV Charger unit with integrated Type 2 charging cable and wall mount.

The Wattsaving EV Charger is a wall-mounted charging station designed for home or private use. It features a robust enclosure and an integrated charging cable.

Кључне компоненте:

• Charger Unit: The main housing containing the electronics and control interface.
• Type 2 Charging Cable (5 meters): Permanently attached cable with a Type 2 connector for vehicle connection.
• РФИД картица: Used for secure activation and deactivation of charging sessions.
• ЛЕД индикатор: Provides status feedback on charging and operational modes.
• Zidni nosač: Bracket for secure installation of the charger unit.

Карактеристике:

• Брзо пуњење: Up to 22 kW, adding approximately 120 km of range per hour of charging.
• Сигурно пуњење: RFID card activation ensures only authorized users can initiate charging.
• Издржљиво кућиште: IP65-rated for water and dust resistance, suitable for various weather conditions.
• Разноврсна компатибилност: Type 2 cable is compatible with a wide range of electric vehicles.

4. Спецификације

Image 2: Charger highlighting fast charging capabilities (up to 32 Amp, 400 Volt, 120 km/h at 22kW).

Image 3: Charger illustrating its comprehensive safety features, including CE certification and various protections.

5. Подешавање и инсталација

The Wattsaving EV Charger requires professional installation. It is crucial that a qualified and certified electrician performs the installation to ensure compliance with all electrical safety standards and local regulations.

General Installation Steps (for qualified personnel):

1. Избор сајта: Choose a suitable location for the charger, preferably near your parking spot, with access to the main electrical panel. Ensure the surface is sturdy enough to support the charger's weight.
2. Напајање: Ensure the electrical circuit can support the charger's power requirements (up to 32A, 400V for 22kW three-phase). A dedicated circuit with appropriate overcurrent protection (circuit breaker) and a Residual Current Device (RCD) is mandatory.
3. Монтажа: Securely mount the charger unit to the wall using the provided mounting bracket and hardware. Ensure it is level and at an appropriate height for easy access.
4. Ожичење: Connect the charger to the main electrical supply. Follow the wiring diagram provided with the product packaging. Ensure all connections are tight and correctly insulated.
5. тестирање: After installation, the electrician must perform thorough testing to verify proper functionality and safety before initial use.

6. Упутство за употребу

Operating the Wattsaving EV Charger is straightforward once installed.

Initiating a Charging Session:

1. Повежите се са возилом: Open your vehicle's charging port and firmly insert the Type 2 charging connector from the Wattsaving EV Charger into the vehicle's inlet. Ensure it clicks into place.
2. Activate with RFID: Hold your RFID card against the designated RFID reader area on the charger unit. The charger's LED indicator will change, typically to a solid green or blue, indicating that charging has started.
3. Пуњење монитора: The LED indicator on the charger and your vehicle's dashboard will show the charging status.

Image 4: Demonstrating the use of an RFID card to initiate a secure charging session.

Ending a Charging Session:

1. Deactivate with RFID: Hold your RFID card against the reader again. The charger will stop the charging process.
2. Искључите се из возила: Once charging has stopped, unlock the charging cable from your vehicle (if necessary, via your vehicle's controls) and carefully remove the Type 2 connector.
3. Кабл за продавницу: Return the charging cable to its designated holder on the wall mount to prevent damage and keep the area tidy.

7. Одржавање

Regular maintenance ensures the longevity and safe operation of your Wattsaving EV Charger.

• Чишћење: The charger's IP65-rated enclosure is durable and resistant to water and dust. Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or high-pressure water jets. Ensure the charger is powered off before cleaning.
• Преглед каблова и конектора: Periodically inspect the charging cable and connector for any signs of damage, cracks, discoloration, or excessive wear. If any damage is observed, discontinue use and contact customer support.
• Складиштење: When not in use, ensure the charging cable is neatly coiled and stored on its holder to prevent tripping hazards and damage.

Image 5: The charger's IP65-rated enclosure ensures durability and protection against environmental elements.

КСНУМКС. Решавање проблема

If you encounter issues with your Wattsaving EV Charger, refer to the following common problems and solutions:

• Пуњач се не покреће:
  • Ensure the charger is properly connected to the main power supply and the circuit breaker is ON.
  • Verify the charging cable is securely connected to both the charger and the vehicle.
  • Confirm the RFID card is correctly tapped to initiate the session.
  • Check the charger's LED indicator for any error codes or status lights.
• Споро пуњење:
  • Ensure your vehicle is capable of accepting the charger's maximum power output.
  • Check your vehicle's charging settings.
  • Verify the electrical installation supports the desired power level (e.g., three-phase supply for 22kW).
• Charging Stops Unexpectedly:
  • This could indicate a safety protection activation (e.g., overtemperature, overcurrent). Check the charger's LED indicator for fault signals.
  • Ensure there are no loose connections.
  • Ако проблем и даље постоји, контактирајте корисничку подршку.
• RFID Card Not Recognized:
  • Ensure the card is placed directly over the RFID reader area.
  • Try another RFID card if available.

For persistent issues or complex problems, please contact Wattsaving technical support.

9. Гаранција и подршка

The Wattsaving EV Charger comes with a 2 година гаранције from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or natural disasters.

For warranty claims, technical assistance, or any questions regarding your Wattsaving EV Charger, please contact Wattsaving customer support. Provide your model number (E22-BLACK-V) and proof of purchase when contacting support.

Произвођач: СХЕНЗХЕН ВАТТСАВИНГ ЕЛЕЦТРИЦАЛ ТЕЦХНОЛОГИ ЦО., ЛТД