WORKPRO W125235

WORKPRO 3.6V бежични пиштољ за вруће лепљење Упутство за употребу

Модел: ВКСНУМКС

Увод

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Безбедносне информације

  • Always keep the glue gun away from children.
  • Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
  • Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
  • Уверите се да је радна површина добро проветрена.
  • Do not leave the hot glue gun unattended when it is powered on.
  • Unplug or power off the glue gun when not in use or before performing any maintenance.
  • Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
  • Allow the equipment to cool down completely before packing it away.
  • This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Садржај пакета

Молимо вас да проверите садржај пакета како бисте били сигурни да су сви предмети присутни и да нису оштећени:

  • 1 x WORKPRO 3.6V Cordless Hot Glue Gun
  • 20 x Mini Glue Sticks (0.27" Dia)
  • 1 к Типе-Ц кабл за пуњење
  • 1 x Упутство за употребу (овај документ)
WORKPRO Cordless Hot Glue Gun and included accessories
Image: The WORKPRO Cordless Hot Glue Gun shown with its included accessories, including the Type-C charging cable and a bundle of 20 mini glue sticks.

Производ је завршенview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

Дијаграм WORKPRO бежичног пиштоља за вруће лепљење са означеним деловима
Image: A detailed diagram of the WORKPRO Cordless Hot Glue Gun, highlighting key components such as the nozzle, ON/OFF switch, glue stick entry, LED indicator, trigger lever, Type-C cable, retractable stand-up base, and Type-C charging port.
  • млазница: Дозвољава растопљени лепак.
  • ОН/ОФФ прекидач: Укључује и искључује уређај.
  • Унос лепка у стику: Где се убацују штапићи лепка.
  • ЛЕД индикатор: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
  • Ручица окидача: Активира наношење лепка.
  • Порт за пуњење типа Ц: За повезивање кабла за пуњење.
  • Увлачива основа за усправљање: Provides stability when the gun is not in use.

Сетуп

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

  1. Locate the Type-C charging port on the glue gun.
  2. Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
  3. ЛЕД индикатор ће бити црвени током пуњења и постати зелен када је потпуно напуњен.
WORKPRO Cordless Hot Glue Gun charging via USB-C
Image: The WORKPRO Cordless Hot Glue Gun connected via its Type-C cable to a laptop for charging, demonstrating its USB rechargeable capability. The LED indicator shows the charging status.

Упутство за употребу

Follow these steps to operate your hot glue gun:

  1. Убаците лепак: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
  2. Укључено: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
  3. Прехеат: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
  4. Нанесите лепак: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
  5. Аутоматско искључивање: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.
WORKPRO Cordless Hot Glue Gun heating up with red LED indicator
Image: The WORKPRO Cordless Hot Glue Gun with its red LED indicator illuminated, signifying that it is in the process of heating up. A timer on the image shows "90S" for the fast preheating time.
Four-step instruction guide for using the WORKPRO Cordless Hot Glue Gun
Image: A visual guide demonstrating the four main steps of using the glue gun: 1) Inserting the glue stick, 2) Pressing the ON/OFF switch, 3) Waiting for the LED to turn green after 90 seconds of preheating, and 4) Pulling the trigger to dispense glue.

Важне напомене:

  • Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
  • Искључите опрему и оставите је да се потпуно охлади пре него што је спакујете.
  • The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.
Comparison of glue output from WORKPRO glue gun versus ordinary glue gun
Image: A side-by-side comparison illustrating the superior glue output and clarity of the WORKPRO glue gun (left) compared to an ordinary glue gun (right). The WORKPRO gun shows a consistent, clear glue flow at 0.14 oz/minute, while the ordinary gun shows a less controlled, drippy output at 0.07 oz/minute.

Одржавање

  • Чишћење: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
  • Одржавање млазница: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
  • Складиштење: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
  • Одржавање батерије: За оптималан век трајања батерије, избегавајте често потпуно пражњење батерије. Редовно је пуните, чак и ако је не користите стално.

Решавање проблема

ПроблемМогући узрокРешење
Пиштољ за лепак се не загрева.Батерија је празна или је празна.
Power switch not pressed correctly.		Потпуно напуните пиштољ за лепак.
Press and hold the ON/OFF switch for 3 seconds until the LED lights up.
No glue dispenses when trigger is pulled.Пиштољ за лепљење није довољно загрејан.
Glue stick not fully inserted or jammed.		Сачекајте да ЛЕД индикатор постане зелен.
Ensure glue stick is fully inserted. Do not force it.
Glue drips excessively from nozzle.Normal during heating/cooling.
Неправилна величина лепка у стику.		Place the gun on its stand. Use only 0.27" diameter glue sticks.
LED indicator remains red.Still heating up.
Пуњење је у току.		Wait for approximately 90 seconds for it to turn green.
Wait for charging to complete (LED turns green).

Спецификације

ФеатуреДетаљ
БрандВОРКПРО
Број моделаВ125235
Извор напајањаНапаја се батеријама (литијум јонски)
Волtage3.6 Волтс
Ватtage9 вати
Капацитет батерије2500мАх
Улаз за пуњење5V 1A (тип C)
Време предгревањаPribl. 90 sekundi
Glue Output Speed0.14 оз/мин
Компатибилан пречник лепка у стику0.27 inches (Mini Sticks)
Аутоматско искључивање8 минута неактивности
Тежина артикла1.1 фунти
Димензије пакета8.11 к 7.52 к 2.13 инча
Земља пореклаКина
Компатибилан материјалWood, Ceramic, Metal, Stone

Гаранција и подршка

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: WORKPRO продавница

© 2025 WORKPRO. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.