ChongXiao 36V-48V 500W Brushless Controller Instruction Manual

1. Увод

This manual provides essential information for the installation, operation, and maintenance of your ChongXiao 36V-48V 500W Brushless Controller. This electronic device is designed to control the speed and direction of brushless motors in electric scooters and electric bicycles. It features a brushless design for smooth operation, high stability, and extended lifespan.

Кључне карактеристике:

• Designed for 36V/48V systems with a rated power of 500W.
• Brushless technology for enhanced performance and durability.
• Controls motor speed and direction for electric bikes and scooters.
• Advanced technology ensures stable performance.

Image 1: The ChongXiao 36V-48V 500W Brushless Controller. This image shows the overall appearance of the controller unit with its various wiring harnesses.

2. Инсталација и ожичење

Careful wiring is crucial for the correct and safe operation of the controller. Please follow these steps precisely. Refer to the wiring diagram for visual guidance.

Image 2: Detailed wiring diagram showing all connection points and their labels for the ChongXiao Brushless Controller. Each wire is numbered and labeled for easy identification.

Ожичење:

1. Motor Line (2): Connect the motor lines, matching colors.
2. Battery Line (3): Connect the battery lines. The red wire is for battery positive (+), and the black wire is for battery negative (-). Ensure correct polarity.
3. Electric Lock Line (4) & Throttle Line (11): Connect the controller's throttle line and electric lock line. If your throttle does not have an integrated electric lock, connect the controller's electric lock line directly to the battery positive (+).
4. Hall Line (5): Connect the Hall sensor lines. If your motor does not have Hall sensors, this connection is not required.
5. Self-Learning Line (6):
   • Connect the two self-learning lines together. The wheel will begin to rotate either forward or in reverse.
   • If the wheel rotates forward, separate the self-learning lines.
   • If the wheel rotates in reverse, separate the self-learning lines, then connect them again. The wheel should now rotate forward. Once it rotates forward, separate the self-learning lines. This completes the self-learning process.
6. Instrumentation Line (1): Connect the instrumentation line. There are two types: one for pointer-type instruments (green wire) and one for liquid crystal (LCD) type instruments (purple wire). Choose the appropriate wire based on your instrument type.
7. Low Brake (7) & High Brake Line (8): Connect your brake levers to these lines as required by your system.
8. 3-Speed Line (9): Connect this line if your system supports 3-speed functionality.
9. Reverse Line (10): Connect this line if your system requires a reverse function.
10. Cruise Speed Line (12): Connect this line if your system supports cruise control.
11. Anti-theft Power Line (13) & Anti-theft Alarm Line (14): Connect these lines if you are integrating an anti-theft system.

Важно: Ensure all connections are secure and insulated to prevent short circuits. Incorrect wiring can damage the controller or other components.

3. Операција

Once the controller is correctly installed and wired, its operation is primarily managed through your electric bike or scooter's throttle and display unit.

• Укључивање/искључивање: Turn on your electric bike/scooter using its main power switch or key. The controller will power up automatically.
• Контрола брзине: Use the throttle to control the motor's speed. The controller translates your throttle input into motor power.
• кочење: Engaging the brake levers will signal the controller to cut power to the motor, ensuring safe stopping.
• 3-Speed Function (if connected): If you have connected the 3-speed line and have a compatible switch, you can cycle through different speed modes (e.g., low, medium, high).
• Cruise Control (if connected): If the cruise speed line is connected and activated via your system's controls, the controller will maintain a constant speed.

Always operate your electric bike or scooter responsibly and in accordance with local regulations.

4. Одржавање

The ChongXiao Brushless Controller is designed for durability and requires minimal maintenance. However, following these guidelines can help ensure its longevity and optimal performance:

• Одржавајте суво: Protect the controller from water and excessive moisture. While it may have some water resistance, it is not fully waterproof.
• чистоћа: Periodically inspect the controller for dirt, dust, or debris accumulation. Clean gently with a dry, soft cloth. Do not use harsh chemicals or solvents.
• Сигурне везе: Regularly check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
• Избегавајте прегревање: Ensure the controller is mounted in a location with adequate airflow to prevent overheating, especially during prolonged use or heavy loads.
• физичка оштећења: Avoid physical impact or dropping the controller, as this can damage internal components.

КСНУМКС. Решавање проблема

If you encounter issues with your ChongXiao Brushless Controller, consider the following common troubleshooting steps:

• Мотор не реагује:
  • Проверите ниво напуњености батерије.
  • Verify all wiring connections, especially battery, motor, throttle, and electric lock lines.
  • Ensure the electric lock line is correctly connected and receiving power.
  • Re-perform the self-learning procedure (Section 2, Step 5).
  • Inspect Hall sensor wires (if applicable) for damage or incorrect connection.
• Motor Runs in Reverse (after self-learning):
  • Repeat the self-learning process carefully, ensuring you separate and reconnect the self-learning lines as instructed when the wheel spins in reverse.
• Intermittent Power/Operation:
  • Проверите да ли има лабавих или кородираних спојева ожичења.
  • Ensure the battery is providing stable voltage.
• Controller Overheating:
  • Ensure the controller has adequate ventilation.
  • Check for excessive load on the motor or prolonged uphill riding.

If problems persist after following these steps, it is recommended to consult a qualified technician or contact customer support.

6. Спецификације

Below are the technical specifications for the ChongXiao 36V-48V 500W Brushless Controller:

Image 3: Dimensions of the ChongXiao 36V-48V 500W Brushless Controller, showing measurements of 150mm length, 80mm width, and 40mm height.

7. Гаранција и подршка

гаранција: The manufacturer's specifications indicate "No" for warranty description. Please refer to your point of purchase for any return or exchange policies.

Корисничка подршка: For further assistance or technical inquiries, please contact the seller or manufacturer through the platform where the product was purchased.