Keychron Q6P-M1

Keychron Q6 Pro Full Aluminum Custom Mechanical Keyboard User Manual

Model: Q6P-M1

1. Увод

Welcome to the user manual for your Keychron Q6 Pro Full Aluminum QMK/VIA Programmable Knob Bluetooth Custom Mechanical Keyboard. This keyboard is designed to provide an exceptional typing experience with its full-size layout, durable aluminum body, and advanced customization options. It features hot-swappable Keychron K Pro Red mechanical switches, KSA double-shot PBT keycaps, a double-gasket design, screw-in stabilizers, and south-facing RGB backlighting.

The Q6 Pro offers both wireless (Bluetooth 5.1) and wired (USB Type-C) connectivity, making it versatile for various devices including laptops, phones, and tablets. Its QMK/VIA compatibility allows for extensive key remapping and macro creation, powered by an ultra-low-power ARM Cortex-M4 32-bit STM32L432 chip.

Keychron Q6 Pro keyboard with red switch detail

Image 1.1: Keychron Q6 Pro Full Aluminum Custom Mechanical Keyboard with a close-up of a red switch.

2. Садржај пакета

Молимо вас да проверите да ли су све ставке присутне у вашем пакету:

  • 1к потпуно састављена тастатура
  • 1к алуминијумско кућиште
  • 1x PCB (Printed Circuit Board)
  • 1к ПЦ плоча
  • 1к пена која апсорбује звук
  • 1к Пена за кућиште
  • 16к заптивки (12 инсталираних и 4 у кутији)
  • 8 сета к стабилизатори
  • 1 set x Keycaps (Double-Shot KSA PBT)
  • 1 сет к прекидача
  • 1к кабл од типа Ц до типа Ц
  • 1к адаптер типа-А на тип-Ц
  • 1к Скидач прекидача
  • 1к извлакач за кључеве
  • 1к Сцревдривер
  • 1к хексадецимални кључ
Diagram showing contents of the Keychron Q6 Pro package

Image 2.1: Visual representation of the Keychron Q6 Pro package contents, including the keyboard, cables, and tools.

3. Подешавање

3.1 Почетно пуњење

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB Type-C cable to the keyboard's Type-C port and the other end to a USB power source (e.g., computer, wall adapter). The keyboard contains a 4000 mAh rechargeable Li-polymer battery.

3.2 Жична веза

To use the keyboard in wired mode, connect the USB Type-C cable from the keyboard to your computer. The keyboard will automatically detect the wired connection. The polling rate in wired mode is 1000 Hz.

3.3 Бежична Bluetooth веза

The Q6 Pro can connect to up to 3 devices wirelessly via Bluetooth 5.1.

  1. Уверите се да је тастатура напуњена.
  2. Toggle the switch on the back of the keyboard to the Bluetooth (BT) mode.
  3. On your device (laptop, phone, tablet), enable Bluetooth and search for available devices.
  4. Select "Keychron Q6 Pro" from the list of devices.
  5. Ако се то од вас затражи, унесите код за упаривање приказан на екрану.
  6. To switch between paired devices, use the designated function keys (refer to the keyboard layout or QMK/VIA software for specific key combinations). The polling rate in wireless mode is 90 Hz.
Close-up of Keychron Q6 Pro's USB-C port and wireless switch

Image 3.1: The USB Type-C port and the wireless/wired mode switch on the Keychron Q6 Pro keyboard.

3.4 Промена оперативног система

The keyboard is compatible with both Mac and Windows operating systems. Use the OS switch located on the back of the keyboard to select the appropriate mode for your system. This ensures correct key mapping for modifier keys like Command/Alt.

4. Упутство за употребу

4.1 Прилагођавање QMK/VIA

The Keychron Q6 Pro supports QMK/VIA firmware, allowing extensive customization of key functions, macros, and lighting effects. To use VIA:

  1. Download the VIA software from the official Keychron webсајт (www.keychron.com/pages/qmk-via).
  2. Connect your keyboard to your computer via the USB Type-C cable.
  3. Launch the VIA application. The software should automatically detect your Q6 Pro keyboard.
  4. You can now remap any key, create complex macros, and customize lighting settings across multiple layers.
Screenshot of the VIA software interface for keyboard customization

Image 4.1: The VIA software interface demonstrating key remapping and layer management.

4.2 РГБ позадинско осветљење

The Q6 Pro features south-facing RGB backlighting with 22 types of preset effects. You can adjust the RGB hue, saturation, brightness, and effect speed directly on the keyboard using specific key combinations (refer to the keyboard's default layout or VIA software for details). These settings can also be remapped via QMK/VIA.

Keychron Q6 Pro keyboard displaying vibrant RGB backlighting

Image 4.2: The Keychron Q6 Pro keyboard illuminated with south-facing RGB backlighting.

4.3 Programmable Knob

The integrated programmable knob typically controls volume by default (turn to adjust, press to mute/unmute). Its function can be fully customized using the QMK/VIA software to perform other actions such as scrolling, zooming, or switching applications.

5. Одржавање

5.1 Чишћење тастатуре

Да бисте одржали оптималне перформансе и изглед, редовно чистите тастатуру:

  • Тастери: Use the provided keycap puller to carefully remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
  • Тело тастатуре: Користите меку крпу која не оставља влакна, благо навлаженуampened with water or a mild cleaning solution, to wipe down the aluminum case. Avoid excessive moisture.
  • Између кључева: Користите компримовани ваздух да уклоните прашину и остатке између прекидача.

5.2 Прекидачи са могућношћу брзе замене

The Q6 Pro features hot-swappable sockets, allowing you to change switches without soldering. It is compatible with most 3-pin and 5-pin MX-style mechanical switches.

  1. Уклоните капицу тастатуре: Use the keycap puller to gently remove the desired keycap.
  2. Уклоните прекидач: Use the switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
  3. Инсталирајте нови прекидач: Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight to avoid bending. Press the switch firmly until it clicks into place.
  4. Поново причврстите капицу тастера: Place the keycap onto the new switch stem and press down gently.

Always ensure the keyboard is disconnected from power before hot-swapping switches to prevent damage.

Close-up of hot-swappable switches on the Keychron Q6 Pro keyboard

Image 5.1: Demonstrating the hot-swappable feature of the Keychron Q6 Pro, showing switches being removed and inserted.

КСНУМКС. Решавање проблема

6.1 Тастатура не реагује

  • Жични режим: Уверите се да је USB-C кабл безбедно повезан и са тастатуром и са рачунаром. Покушајте са другим USB портом или каблом.
  • Бежични режим: Check if the keyboard is charged. Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Try re-pairing the keyboard.
  • OS Switch: Verify the OS switch on the back of the keyboard is set to the correct operating system (Mac/Windows).

6.2 Проблеми са повезивањем путем Bluetooth-а

  • сметње: Приближите тастатуру свом уређају и даље од других бежичних уређаја који могу изазвати сметње.
  • Ограничење уређаја: The keyboard supports up to 3 paired devices. If you're trying to connect a fourth, you may need to unpair one of the existing connections.
  • Поновно упаривање: Remove "Keychron Q6 Pro" from your device's Bluetooth list and attempt to pair again.

6.3 Тастери се не региструју или се куцају двапут

  • Switch Issue: This might indicate a faulty switch. Use the switch puller to remove the problematic switch and replace it with a spare or a known working switch.
  • Отпад: Check for any debris under the keycap or around the switch stem.

6.4 RGB Backlight Not Working

  • Осветљеност: Ensure the backlight brightness is not set to minimum. Adjust using the keyboard's function keys.
  • софтвер: If using VIA, check the lighting settings within the software.

7. Спецификације

Table of Keychron Q6 Pro technical specifications

Image 7.1: Detailed technical specifications for the Keychron Q6 Pro keyboard.

Keychron Q6 Pro Technical Specifications
ФеатуреДетаљ
МоделQ6P-M1
Димензије (Д к Ш к В)17.56 к 5.39 к 1.28 инча (446 к 137 к 32.6 мм)
Тежина6.69 фунте (3034 г)
Материјал телаFull CNC machined aluminum
КеицапсKSA double-shot PBT (not shine-through)
ПрекидачиKeychron K Pro Red Mechanical Switches (Hot-swappable)
Позадинско осветљењеSouth-facing RGB LED
ПовезивањеBluetooth 5.1 / USB Type-C wired
Поллинг Рате1000 Hz (wired) / 90 Hz (wireless)
Батерија4000 mAh Rechargeable Li-polymer battery
Battery Life (Backlight off)До 300 сати
Battery Life (RGB)Up to 100 hours (lowest brightness)
Компатибилни системимацОС/Виндовс/Линук
МЦУUltra-low-power ARM Cortex-M4 32-bit STM32L432 (128KB Flash)
Н-Кеи Ролловер (НКРО)Yes (both wireless and wired modes)
Оперативно окружење-10 до 50°Ц

8. Гаранција и подршка

Keychron products are manufactured with high-quality standards. For warranty information, technical support, or to access additional resources (such as firmware updates or VIA keymap files), please visit the official Keychron webсајт:

ввв.кеицһрон.цом

Такође можете размотрити куповинуasing extended protection plans for your device. Details on available protection plans can be found where you purchased the product or through authorized retailers.

© 2023 Keychron. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.