Jectse Digital Voice Recorder Watch User Manual

1. Увод

Thank you for choosing the Jectse Digital Voice Recorder Watch. This device is designed for convenient and discreet audio recording, featuring voice activation, noise reduction, and timestamp capabilities. This manual provides essential information for the proper setup, operation, and maintenance of your new voice recorder watch.

2. Производ је готовview

Кључне карактеристике:

• Снимање активирано гласом: Automatically records when sound is detected and pauses when silent, conserving battery and memory.
• Смањење буке: Built-in professional chip for clear audio capture.
• Тиместamp Функција: Records the exact start and end times of each recording for accurate referencing.
• Пуњива батерија: Integrated 110mAh polymer lithium battery, supports recording while charging.
• Дуг век трајања батерије: Up to 20 hours of continuous recording and 30 days of standby time.
• Меморија: 32 ГБ интерне меморије.
• Формат снимања: WAV.
• Формати репродукције: МП3, ВМА, ВАВ.

Садржај пакета:

• 1 x Voice Recorder Watch
• 1 к кабл за пуњење
• 1 к слушалица
• 1 x Упутство за употребу (овај документ)
• 1 x adapter kabl

Image 1: The Jectse Digital Voice Recorder Watch, showcasing its sleek design and the timestamp feature for accurate recording data generation.

Image 2: All items included in the package: the voice recorder watch, charging cable, earphone, and adapter cable.

3. Подешавање

Прво пуњење:

1. Пре прве употребе, потпуно напуните уређај.
2. Connect the provided charging cable to the watch's USB port.
3. Укључите други крај кабла за пуњење у УСБ адаптер за напајање (није укључен) или УСБ порт рачунара.
4. The device will indicate charging status (e.g., an LED light). Allow sufficient time for a full charge.

Слика 3: Детаљан view of the USB charging port on the side of the voice recorder watch, with its protective cover open.

Повезивање са рачунаром:

To transfer recorded fileили подесите времеamp, connect the watch to your computer using the provided USB cable. The device will appear as a removable storage drive.

4. Упутство за употребу

Укључивање/искључивање:

• To power on, locate the power button (refer to device diagram if available) and press and hold it until the indicator light activates.
• Да бисте искључили напајање, поново притисните и држите дугме за напајање док се индикаторска лампица не угаси.

Снимање:

• Once powered on, the device is typically in standby mode, ready for voice-activated recording.
• When sound is detected, the recorder will automatically begin recording.
• When silence is detected, the recorder will automatically pause, saving memory and battery.
• Recordings are saved as WAV files.

Репродукција:

• Connect the provided earphone to the watch's earphone jack.
• Use the control buttons on the watch (refer to device diagram) to navigate through recordings and initiate playback.
• The device supports MP3, WMA, and WAV playback formats.

Тиместamp Функција:

The watch automatically embeds a timestamp into each recording, indicating the generation time and end time. To ensure accuracy, synchronize the watch's internal clock by connecting it to a computer. The computer's system time will typically update the device's timestamp.

Пуњење током снимања:

The device supports recording while connected to a power source, allowing for extended recording sessions.

5. Одржавање

• Одржавајте уређај чистим тако што ћете га обрисати меком, сувом крпом.
• Avoid exposing the watch to extreme temperatures, direct sunlight, or moisture.
• Do not attempt to disassemble the device, as this will void the warranty and may cause damage.
• Чувајте уређај на хладном и сувом месту када се не користи.

КСНУМКС. Решавање проблема

Уређај се не укључује:

• Ensure the battery is charged. Connect to a power source and allow it to charge for at least 30 minutes.
• Чврсто притисните и држите дугме за напајање неколико секунди.

Не може се снимати:

• Check if the device has sufficient memory. Transfer files to a computer to free up space if needed.
• Ensure the battery is not critically low. Charge the device.

Лош квалитет звука:

• Ensure the recording environment is not excessively noisy.
• Check if the microphone is obstructed.

Тиместamp is incorrect:

• Connect the watch to a computer. The device's internal clock should synchronize with the computer's system time.

7. Спецификације

8. Гаранција и подршка

Specific warranty details for the Jectse Digital Voice Recorder Watch are not provided in this manual. For information regarding warranty coverage, technical support, or service, please refer to the product packaging or contact the manufacturer directly through their official webсајт или канали за корисничку подршку.