Jectse 2.4GHz 4-Channel RC Gyro Receiver Instruction Manual

1. Производ је готовview

The Jectse 2.4GHz 4-Channel RC Gyro Receiver is designed for remote control vehicles such as cars and boats. It features a single antenna bidirectional transmission system and integrates a high-performance gyroscope for enhanced control. This receiver is compatible with AFHDS 3 transmitters, including Flysky NB4, Noble Lite, and Noble Pro series.

Кључне карактеристике укључују:

• Bidirectional transmission with a single antenna.
• Support for PWM, PPM, i BUS2, S.BUS, and J BUS data output.
• Compatibility with AFHDS 3 protocol transmitters.
• Built-in high-performance gyroscope.
• Integrated BVD (Battery Voltage Detection) function.
• PPX6 splash-proof rating.

Image 1.1: The Jectse RC Gyro Receiver highlighting its multi-function capabilities, including external single antenna with back propagation, built-in high-performance gyroscope, integrated BVD battery voltage detection, and PPX6 splash-proof design.

2. Садржај пакета

Молимо вас да проверите да ли су све ставке наведене у наставку укључене у ваш пакет:

• 1 x Gyro Receiver
• 1 x Kabl za povezivanje
• 1 x Упутство за употребу (овај документ)
• 1 к пластична кутија

Image 2.1: The Jectse RC Gyro Receiver shown alongside its included connection cable.

3. Спецификације

Image 3.1: The Jectse RC Gyro Receiver, illustrating its single antenna bidirectional transmission system and the various data output types supported (PWM, PPM, i BUS, S.BUS, i BUS2).

4. Подешавање и инсталација

Follow these steps to properly install and set up your Jectse RC Gyro Receiver:

1. Физичка инсталација: Mount the receiver securely in your RC vehicle (car or boat), ensuring it is protected from excessive vibration and moisture.
2. Прикључак за напајање: Connect the receiver to a power source within the specified input power range of 3.5-9 V DC.
3. Компатибилност предајника: Ensure your transmitter uses the AFHDS 3 protocol. Compatible transmitters include Flysky PL18, NB4, NB4 Lite, and other Noble series transmitters.
4. Процес везивања:
   • Укључите пријемник.
   • Притисните и држите Бинд дугме на пријемнику.
   • Initiate the binding process on your AFHDS 3 compatible transmitter according to its specific instructions.
   • Once bound, the receiver's indicator light will confirm a successful connection.
5. Data Output Connections: Connect your servos, ESC, and other components to the appropriate PWM, PPM, i BUS2, S.BUS, or J BUS ports on the receiver.
6. BVD Port Connection: If using the Battery Voltage Detection (BVD) function, connect the provided cable to the BVD port само. Do not connect other components to this port.
7. Gyroscope Function (Noble Series): For Noble series transmitters, you may need to enable the gyroscope function (INr4 GYB) through your transmitter's settings menu. Refer to your transmitter's manual for detailed instructions.

Слика 4.1: Крупни план view of the Jectse RC Gyro Receiver, showing the various ports for connections and the "Bind" button for pairing with a transmitter.

Image 4.2: The connection cable, with a clear warning to connect it to the BVD port only for battery voltagе детекција.

5. Упутство за употребу

Once the receiver is successfully installed and bound to your transmitter, you can begin operation:

• Основна контрола: Use your AFHDS 3 transmitter to control your RC vehicle. The receiver processes signals for steering, throttle, and other functions via the connected servos and ESC.
• Gyroscope Function: The built-in gyroscope provides stability and improved handling, especially for drift cars and other high-performance vehicles. Adjust gyroscope sensitivity via your transmitter if supported.
• Баттери Волtage Detection (BVD): If the BVD cable is connected, your transmitter can display the real-time battery voltage of your RC vehicle, allowing you to monitor power levels during operation.
• Излаз података: The receiver supports various data output protocols. Ensure your connected devices (e.g., flight controllers, telemetry modules) are configured to receive data from the appropriate port (PWM, PPM, i BUS2, S.BUS, J BUS).

Image 5.1: The Jectse RC Gyro Receiver, detailing its compatibility with AFHDS 3 transmitters (PL18, NB4, NB4 Lite) and its suitability for various RC applications including drift cars, recreational vehicles, F1, and linear acceleration cars. It also notes the ability to enable gyroscope function for Noble series.

6. Одржавање

Proper maintenance ensures the longevity and reliable performance of your receiver:

• Чишћење: Regularly clean the receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Услови животне средине: Operate and store the receiver within the specified temperature range (-10°C to +60°C) and humidity range (20%-95%).
• Заштита од влаге: While the receiver is PPX6 splash-proof, avoid submerging it in water or exposing it to heavy rain. Ensure all connections are dry before powering on.
• Интегритет везе: Periodically check all wire connections for looseness or damage. Secure any loose connections.
• Ажурирања фирмвера: The receiver supports online updates. Check the Jectse official website or your transmitter's manufacturer for available firmware updates to ensure optimal performance and access to new features.

КСНУМКС. Решавање проблема

If you encounter issues with your receiver, refer to the following common troubleshooting steps:

• Нема напајања:
  • Проверите везу са извором напајања и напуњеност батерије.
  • Осигурајте улазну волtage is within 3.5-9 V DC.
• Binding Failure:
  • Ensure both receiver and transmitter are in binding mode.
  • Verify your transmitter is AFHDS 3 compatible.
  • Move closer to the transmitter during the binding process.
  • Проверите да ли постоје сметње од других уређаја од 2.4 GHz.
• Loss of Signal/Intermittent Control:
  • Проверите положај антене; уверите се да није блокирана или оштећена.
  • Verify the transmitter battery level.
  • Уверите се да у близини нема јаких извора сметњи.
• Gyroscope Not Functioning (Noble Series):
  • Confirm the gyroscope function (INr4 GYB) is enabled in your transmitter's settings.
  • Refer to your transmitter's manual for specific gyroscope calibration or adjustment procedures.
• Нетачан излаз података:
  • Verify that connected devices are configured for the correct data protocol (PWM, PPM, i BUS2, S.BUS, J BUS).
  • Check wiring connections to ensure they are correctly plugged into the designated ports.

If problems persist, consult the support resources mentioned in the next section.

8. Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Jectse customer service directly. Keep your proof of purchase for warranty claims.

За додатну помоћ, можете посетити и Jectse Store on Amazon.