Shutao STC-3028
STC-3028 24V Temperature & Humidity Controller User Manual
Model: STC-3028 (13443ST-1)
Brand: Shutao
Производ је завршенview
The STC-3028 is a versatile 24V temperature and humidity controller designed for precise environmental management. It features a dual digital display for simultaneous monitoring of temperature and humidity, making it ideal for applications such as incubators, terrariums, and other controlled environments. This device supports both heating/cooling and humidifying/dehumidifying functions.
Image: The STC-3028 controller unit with its integrated temperature and humidity sensor. The controller features a dual digital display showing temperature in red and humidity in blue.
Техничке спецификације
| Спецификација | Валуе |
|---|---|
| Улазни волtage | АЦ 24В |
| Мерење температурног опсега | -50°Ц до +110°Ц |
| Мерење опсега влажности | 00%RH to +100%RH |
| Прецизност температуре | ±1°Ц |
| Прецизност влажности | ± КСНУМКС% РХ |
| Relay Output Contact Capacity | 10А/240ВАЦ |
| Дисплаи Типе | Дигитал |
| Материјал | Пластика |
| Димензије (Д к Ш к В) | 75 мм x 85 мм x 27 мм (приближно 2.95 цм x 3.34 цм x 1.06 цм) |
| Тежина артикла | 0.48 унци (приближно 0.03 лбс) |
Image: Diagram showing the dimensions of the STC-3028 controller: 75mm (2.95 inches) length, 85mm (3.34 inches) width, and 27mm (1.06 inches) height.
Садржај пакета
Пакет укључује следеће ставке:
- 1 x STC-3028 Temperature and Humidity Controller
- 1 x Integrated Sensor (for temperature and humidity measurement)
Подешавање и инсталација
Дијаграм ожичења
Proper wiring is crucial for the safe and correct operation of the STC-3028 controller. Refer to the diagram below for connection details.
Image: A visual representation of the STC-3028 wiring diagram. It shows terminals for power supply (1-2), humidity sensor (3-5), and output relays for temperature (6-7) and humidity (8-9). The diagram also indicates voltage options (110-220VAC, 12V, 24V) and important notes regarding distinguishing interfaces and maintaining proper wire distance.
Важне напомене:
- Строго разликујте интерфејс релеја, сензора и напајања.
- Strictly distinguish the connection of the sensor and power supply.
- The sensor down-lead and power wire should be kept a proper distance apart to avoid interference.
- Осигурајте тачан обимtage (24V) is supplied as indicated on the unit.
Монтажа
The STC-3028 is designed for panel mounting. Ensure adequate space for ventilation, especially around the heat dissipation grids on the sides of the unit.
Image: The STC-3028 controller with a visual representation of air flowing through its side vents, indicating effective heat dissipation. The image highlights the cooling grid design for efficient cooling.
Упутство за употребу
Setting Startup Temperature/Humidity
- Притисните тастер "up" button once to display the current starting temperature or humidity setting.
- Дуго притисните "up" button for approximately 3 seconds until the display flashes.
- Користите "up" и "down" keys to adjust the desired starting temperature or humidity value.
- The setting will automatically save after a few seconds of inactivity or by pressing another button.
Setting Stop Temperature/Humidity
- Притисните тастер "down" button once to display the current stop temperature or humidity setting.
- Дуго притисните "down" button for approximately 3 seconds until the display flashes.
- Користите "up" и "down" keys to adjust the desired stop temperature or humidity value.
- The setting will automatically save after a few seconds of inactivity or by pressing another button.
Temperature/Humidity Correction (Calibration)
To correct or calibrate the temperature and humidity readings:
- Притисните тастер "up" и "down" дугмад истовремено.
- Follow the on-screen prompts to adjust the offset for temperature or humidity. Refer to the product's advanced settings for detailed calibration procedures if available.
Одржавање
- Чишћење: Regularly wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Брига о сензорима: Keep the integrated sensor clean and free from dust or debris to ensure accurate readings. Avoid exposing the sensor to extreme physical shock or moisture beyond its operating range.
- вентилација: Ensure the ventilation grids on the sides of the unit are not obstructed to allow for proper heat dissipation.
- Искључивање струје: Always disconnect power before performing any maintenance or wiring adjustments.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Екран приказује „LLL“ или „HHH“ | Sensor error, sensor disconnected, or reading out of range. | Check sensor connection. Ensure sensor is within operating temperature/humidity range. Replace sensor if damaged. |
| Jedinica se ne uključuje | Нема напајања, нетачна јачина звукаtage, or faulty wiring. | Verify power connection and ensure 24V AC supply. Check wiring according to the diagram. |
| Output relay not activating | Settings incorrect, or relay faulty. | Review startup and stop settings. Ensure the measured value is outside the set range to trigger the relay. Check relay wiring. |
| Нетачна очитавања | Sensor dirty, sensor interference, or needs calibration. | Clean the sensor. Ensure sensor wires are kept separate from power wires. Perform temperature/humidity correction. |
Гаранција и подршка
For warranty information and technical support, please contact Shutao customer service. Keep your purchase receipt as proof of purchase.
Contact information may be available on the product packaging or the manufacturer's official webсајту.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.