Yaheetech Armless Mid-Back Office Chair - User Manual

1. Увод

Thank you for choosing the Yaheetech Armless Mid-Back Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

2. Безбедносне информације

• Пре склапања проверите да ли су сви делови присутни и неоштећени. Не користите ако неки делови недостају или су поломљени.
• Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
• Немојте стајати на столици.
• Не прекорачујте максималну дозвољену тежину од 136 кг (300 фунте).
• Држите децу даље од столице током склапања. Мали делови могу представљати опасност од гушења.
• Користите столицу на равној површини да бисте спречили превртање.
• Regularly check all bolts and screws to ensure they are tight. Retighten as necessary.

3. Садржај пакета

Проверите да ли су све компоненте наведене у наставку укључене у ваш пакет:

• 1 x Office Chair (unassembled)
• 1 к Упутство за употребу
• 1 x Комплет додатне опреме (садржи све потребне шрафове, вијке и алате)

4. Упутство за монтажу

Assembly typically takes 15-30 minutes with two people. Follow these steps carefully:

1. Припремите базу: Unpack all components. Place the five-star base on a flat, stable surface. Insert the five casters into the holes at the end of each leg of the base until they click into place.
2. Инсталирајте гасни лифт: Insert the gas lift cylinder into the center hole of the five-star base.
3. Уклоните заштитну капицу: ВАЖНО: Before attaching the seat, remove the black plastic protective cap from the top of the gas lift cylinder. Failure to do so will prevent height adjustment.


Figure 4.1: Removing the black plastic cap from the gas lift.

4. Причврстите плочу механизма: Align the mechanism plate with the screw holes on the underside of the seat cushion. Ensure the lever is on the right side when facing the front of the seat. Secure with the provided screws and tighten using the Allen key.
5. Повежите седиште са базом: Carefully place the assembled seat onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift. Press down firmly to secure.

5. Упутство за употребу

Ваша канцеларијска столица Yaheetech нуди неколико подесивих карактеристика за персонализовану удобност:

5.1. Подешавање висине седишта

To adjust the seat height, lift the lever located on the right side of the seat. While seated, lift the lever to lower the seat. To raise the seat, lift the lever while standing or with minimal weight on the seat. Release the lever to lock the height in place. The seat height can be adjusted from approximately 47.5 cm to 57.5 cm.

Figure 5.1: Adjustable seat height and rocking function.

5.2. Tilt Function and Tension

The chair features a rocking function for relaxation. To activate the rocking motion, pull out the lever on the right side of the seat. Push the lever in to lock the chair in an upright position.

The tilt tension can be adjusted by turning the round knob located underneath the seat. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

Figure 5.2: Adjusting tilt tension and activating rocking motion.

5.3. Окретање и мобилност

The chair is designed with a 360° swivel function and smooth-rolling casters, allowing for easy movement and access to your workspace without strain.

Figure 5.3: Armless design for space-saving and easy mobility.

6. Одржавање

Proper care will extend the life and appearance of your chair:

• Чишћење: The faux leather surface is water-resistant and easy to clean. Wipe spills immediately with a damp cloth. For general cleaning, use a soft, damp крпом благим сапуном и водом. Избегавајте јаке хемикалије или абразивна средства за чишћење.
• инспекција: Periodically check all screws and bolts for tightness. Retighten as needed to maintain stability and safety.
• Котачићи: Држите точкове чистим од длака и остатака како бисте осигурали глатко котрљање.
• Избегавајте директну сунчеву светлост: Дуготрајно излагање директној сунчевој светлости може проузроковати да вештачка кожа избледи или пукне.

КСНУМКС. Решавање проблема

• Столица се не подешава по висини: Ensure the black plastic protective cap has been removed from the gas lift cylinder. Check if the height adjustment lever is fully engaged.
• Столица се клима: Проверите све завртње и вијке за склапање. Затегните све лабаве спојеве. Уверите се да је столица на равној, равној површини.
• Точкови се не котрљају глатко: Inspect casters for trapped debris (hair, lint, etc.) and clean them.
• Chair squeaks: Apply a small amount of silicone lubricant to moving parts or connections if persistent squeaking occurs.

8. Спецификације

Note: Dimensions may vary slightly (up to 1.5 cm) due to manufacturing tolerances.

9. Гаранција и подршка

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Yaheetech customer service directly. Keep your purchase receipt as proof of purchase.