AVI-8 P-51 Mustang Blakeslee AV-4077 Chronograph Pilot Watch Instruction Manual

1. Увод

This manual provides essential instructions for the setup, operation, and maintenance of your AVI-8 P-51 Mustang Blakeslee AV-4077 Chronograph Pilot Watch. Please read this manual thoroughly to ensure proper use and longevity of your timepiece.

The AVI-8 P-51 Mustang Blakeslee watch features a 43mm stainless steel case with a black PVD finish and a scratch-resistant mineral crystal lens with anti-reflective coating. It is powered by a Japanese Meca-Quartz chronograph movement, offering precise timekeeping with luminous hands and markers for readability. The watch is water-resistant up to 50 meters and comes with a genuine black leather strap with a classic buckle closure.

Слика 1.1: Предња страна view of the AVI-8 P-51 Mustang Blakeslee AV-4077 Chronograph Pilot Watch.

2. Карактеристике и компоненте производа

• Материјал кућишта: нерђајући челик
• Оквир: Fixed Bezel
• Објектив: Mineral Lens with Anti-Reflective Coating
• бенд: 22mm Genuine Leather Strap
• Кретање: Japanese Meca-Quartz Chronograph
• круна: Извуците
• Пречник кућишта: 43мм
• Отпорност на воду: 50М

Image 2.1: Detailed diagram illustrating the key features and components of the Blakeslee Chronograph.

Image 2.2: The watch dial showcasing its luminous hands and markers for enhanced visibility in low-light conditions.

3. Подешавање

3.1 Почетно подешавање и подешавање времена

1. Before setting the time, ensure any plastic tab protecting the crown is removed.
2. Gently pull the crown (located on the right side of the watch case) out to its outermost position. This will stop the second hand.
3. Окрените круницу у смеру казаљке на сату или супротно од смера казаљке на сату да бисте подесили казаљке за сате и минуте на жељено време.
4. Када подесите време, вратите круницу у првобитни положај. Секундна казаљка ће наставити да се креће.

3.2 Подешавање датума

1. Pull the crown out to the first click position (if applicable, otherwise use the outermost position).
2. Окрените круницу да бисте подесили датум. Избегавајте подешавање датума између 21:00 и 3:00, јер то може ометати механизам аутоматске промене датума.
3. Када подесите датум, вратите круницу у првобитни положај.

4. Руковање хронографом

Your AVI-8 AV-4077 watch features a chronograph function for measuring elapsed time. The chronograph typically uses dedicated pushers on the side of the watch case.

4.1 Покретање и заустављање хронографа

1. Press the top pusher (usually located at the 2 o'clock position) to start the chronograph. The chronograph second hand will begin to move.
2. To stop the chronograph, press the top pusher again. The chronograph hands will stop, indicating the elapsed time.

4.2 Ресетовање хронографа

1. After stopping the chronograph, press the bottom pusher (usually located at the 4 o'clock position) to reset the chronograph hands to their zero positions.

5. Одржавање

5.1 Отпорност на воду

Your AVI-8 AV-4077 watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, showering, or washing hands. It is NOT suitable for diving, snorkeling, or prolonged water exposure. Always ensure the crown is fully pushed in before any contact with water.

5.2 Чишћење

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture and harsh chemicals. Clean with a damp крпом и оставите да се природно осуши на ваздуху.

5.3 Нега каиша

The genuine leather strap may show signs of wear over time. To prolong its life, avoid prolonged exposure to direct sunlight, extreme temperatures, and moisture. If the strap becomes wet, dry it thoroughly before wearing.

КСНУМКС. Решавање проблема

6.1 Watch Not Running or Intermittent Operation

• Проверите да ли је круница потпуно угурана. Ако је извучена, сат неће радити.
• The Meca-Quartz movement requires a battery. If the watch stops completely, the battery may need replacement. Contact a qualified watch technician for battery replacement.

6.2 Chronograph Hands Not Resetting to Zero

If the chronograph hands do not return precisely to the 12 o'clock (zero) position after resetting, they may need calibration. This can sometimes occur after a battery change or impact.

1. Pull the crown out to the outermost position (time setting position).
2. Press the top pusher repeatedly to advance the chronograph second hand until it aligns with the 12 o'clock position.
3. If other chronograph sub-dials are misaligned, use the bottom pusher to adjust them to their zero positions.
4. Once all chronograph hands are aligned, push the crown back into its normal operating position.

7. Спецификације

8. Гаранција и подршка

For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official AVI-8 webсајт. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.