Шепах 7911200639
Сцхеппацх нож за косилицу 560 мм Упутство за употребу
Модел: 7911200639
Бренд: Сцхеппацх
Увод
This manual provides essential information for the safe and effective installation, use, and maintenance of your Scheppach 560 mm replacement lawn mower blade. This blade is designed for gasoline lawn mowers, specifically compatible with models MS225-56, MS225-56E, BLM560-225ES, and PML56-225ES. Proper installation and care will ensure optimal performance and longevity of the blade.
Безбедносна упутства
Always prioritize safety when handling and installing the lawn mower blade. Failure to follow these instructions may result in serious injury or damage to the equipment.
- Искључите свећицу: Before performing any work on the lawn mower, always disconnect the spark plug wire to prevent accidental starting of the engine.
- Носите заштитну опрему: Always wear heavy-duty gloves and eye protection when handling the blade, as it is sharp and can cause cuts.
- Стабилна површина: Ensure the lawn mower is on a flat, stable surface and cannot tip over during blade replacement.
- Дозволите мотору да се охлади: If the mower has been recently used, allow the engine and muffler to cool down completely before beginning work.
- Редовно проверавајте сечиво: Periodically inspect the blade for damage, cracks, or excessive wear. Replace immediately if any damage is found.
Инсталација (Подешавање)
Follow these steps to safely replace your lawn mower blade. Refer to your lawn mower's specific manual for detailed instructions on accessing the blade.
- Припремите косилицу: Disconnect the spark plug wire and ensure the fuel tank is empty or the fuel valve is closed. Tilt the mower onto its side with the carburetor facing upwards to prevent fuel leakage.
- Осигурајте сечиво: Use a block of wood or a specialized blade removal tool to secure the old blade from turning.
- Уклоните стару оштрицу: Using an appropriately sized wrench, loosen the blade bolt(s) by turning counter-clockwise. Remove the old blade, washer(s), and any spacers. Note the orientation of all components for correct reassembly.
- Чисто место за монтажу: Clean any grass clippings or debris from the blade mounting area on the mower deck.
- Инсталирајте нову оштрицу: Position the new Scheppach 560 mm blade, ensuring the cutting edges face the correct direction (usually indicated by an arrow on the blade or mower deck). The mulching wings should point upwards towards the mower deck.
- Secure Blade Bolt(s): Reinstall the washer(s) and blade bolt(s). Tighten the bolt(s) securely with the wrench, turning clockwise. Refer to your mower's manual for the correct torque specifications.
- Коначна провера: Ensure the blade is firmly attached and spins freely without wobbling. Reconnect the spark plug wire before starting the mower.

Слика 1: Одозго надоле view of the Scheppach 560 mm lawn mower blade, highlighting its design and mounting holes.

Слика 2: Под углом view of the Scheppach 560 mm lawn mower blade, illustrating the mulching wing design.
Usage Considerations (Operating)
This Scheppach blade is designed for mulching, mowing, and discharge. For optimal performance:
- Косење суве траве: For best mulching results, mow when the grass is dry. Wet grass can clump and lead to an uneven cut.
- Do Not Remove Too Much: Avoid cutting more than one-third of the grass blade length at a time. This promotes healthier lawn growth and better mulching.
- Чисти остатке: Before mowing, clear the area of any stones, sticks, or other debris that could damage the blade or be thrown by the mower.

Figure 3: Key features of the Scheppach 560 mm blade, including its 3-in-1 functionality and robust design.
Blade Care (Maintenance)
Regular maintenance of your blade will extend its lifespan and ensure a clean cut.
- Очистите након сваке употребе: After each mowing session, disconnect the spark plug and carefully clean grass clippings and debris from the blade and the underside of the mower deck. This prevents buildup that can affect performance and balance.
- Прегледајте има ли оштећења: Regularly inspect the blade for nicks, bends, cracks, or excessive wear. A bent or damaged blade can cause severe vibration and an uneven cut, and should be replaced immediately.
- Оштрење: While this is a replacement blade, if you choose to sharpen it, ensure it is balanced after sharpening to prevent vibration. It is often more practical and safer to replace a worn blade with a new one.
- Складиштење: Store the blade in a dry place to prevent rust. If storing the mower for an extended period, ensure the blade is clean and lightly oiled.
Common Issues (Troubleshooting)
| Иссуе | Могући узрок | Решење |
|---|---|---|
| Уневен Цут | Dull or unbalanced blade; grass too wet; cutting too much grass at once. | Replace blade if dull or damaged. Ensure blade is balanced. Mow when grass is dry. Cut less grass per pass. |
| Прекомерна вибрација | Bent or unbalanced blade; loose blade bolt. | Inspect blade for bends or damage and replace if necessary. Ensure blade is properly balanced. Tighten blade bolt to specified torque. |
| Poor Mulching | Blade is dull; grass is too long or wet; engine speed too low. | Replace blade. Mow more frequently or when grass is dry. Ensure mower engine is running at optimal RPM. |
Спецификације
- Произвођач: Сцхеппацх
- Број модела: 7911200639
- Дужина сечива: 560 мм (56 цм)
- Тежина артикла: 710 г
- Компатибилност: Scheppach Gasoline Lawn Mowers MS225-56, MS225-56E, BLM560-225ES, PML56-225ES
- Функција: Mowing, Mulching, Discharge (3-in-1)
- Димензије пакета: 56.3 к 6.4 к 4.2 цм
- Укључене компоненте: 1x Lawn Mower Blade
Гаранција и подршка
Specific warranty information and detailed support contacts are not provided within this manual. For warranty claims, technical support, or to purchase additional parts, please refer to the official Scheppach website or contact Scheppach customer service directly. Keep your purchase receipt as proof of purchase.
You can visit the official Scheppach store on Amazon for more information: Scheppach Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.