AUTOOL CT500 Машина за чишћење и испитивање убризгавача горива - упутство за употребу

1. Производ је готовview

The AUTOOL CT500 is a professional-grade ultrasonic fuel injector cleaner and tester machine designed for comprehensive maintenance of various fuel injector types, including GDI, EFI, and FSI. It features a color display for real-time data, a large cleaning tank, and supports multi-voltage injectors. This machine is capable of performing both cleaning and testing functions to ensure optimal performance of your vehicle's fuel system.

Слика: Прекоview of the AUTOOL CT500 highlighting its 15 available functions, including 3 cleaning functions and 12 testing functions.

2. Безбедносне информације

Please read and understand all safety warnings and instructions before operating the AUTOOL CT500. Failure to do so may result in serious injury or damage to the equipment.

• електрична безбедност: Ensure the power supply is well-connected and grounded. Do not operate the machine with wet hands.
• Хемијско руковање: Use appropriate protective gear (gloves, eye protection) when handling cleaning and testing fluids. Ensure adequate ventilation in the work area.
• Запаљиве течности: No open flames are allowed around the machine during operation. Use non-flammable cleaning and testing solutions.
• Injector Handling: Always ensure injectors are securely installed before starting any cleaning or testing process.
• Безбедност притиска: Do not disconnect hoses or fittings while the system is pressurized. Release pressure before performing any maintenance or adjustments.
• Деца и кућни љубимци: Држите машину ван домашаја деце и кућних љубимаца.

3. Шта је у кутији

The AUTOOL CT500 package includes the following components:

• AUTOOL CT500 Main Unit
• Various sizes of Injector Connectors and Adapters
• 3 Different Pulse Signal Cables (e.g., Mercedes-Benz, BMW, Universal)
• Ултразвучни резервоар за чишћење
• Oil Rail and Lock Poles
• Measuring Cylinders
• Oil Drain Handle
• Повер Цабле
• Фуннел
• Упутство за употребу

Image: The AUTOOL CT500 Fuel Injector Cleaner and Tester machine along with its comprehensive set of accessories, including various connectors, cables, and tools.

Image: Close-up of the three different pulse signal cables provided, including specific cables for Mercedes-Benz and BMW, and a universal cable.

Image: A selection of various sized injector connectors, ranging from Ø11 to Ø15.8, and specific connectors for BMW, ensuring wide compatibility.

4. Подешавање

1. Распакивање: Пажљиво уклоните све компоненте из паковања.
2. Пласман: Place the CT500 main unit on a stable, level surface in a well-ventilated area, away from open flames.
3. Прикључак за напајање: Connect the power cable to the machine and a grounded AC 110V/220V power outlet.
4. Fluid Preparation:
   • For ultrasonic cleaning, add appropriate cleaning fluid to the ultrasonic tank.
   • For testing, add suitable test fluid (e.g., 99% rubbing alcohol) to the main tank using the provided funnel. Ensure the fluid level is adequate for testing.
5. Уградња инјектора:
   • Install the desired injector connectors onto the oil rail.
   • Securely mount the injectors into the oil rail and then into the measuring cylinders.
   • Connect the appropriate pulse signal cables from the machine to each injector.
6. Почетно укључивање: Flip the power switch to turn on the machine. The color display will illuminate.

Image: The high-definition color display of the AUTOOL CT500, showing real-time work data, function selection, voltage selection, and working pressure control.

5. Упутство за употребу

5.1 Функције чишћења

The CT500 offers three primary cleaning functions:

1. Ултразвучно чишћење:

   This function uses ultrasonic waves to thoroughly remove carbon deposits and internal blockages from injectors. It can clean single or multiple injectors simultaneously.

   • Place injectors in the ultrasonic cleaning tank.
   • Add appropriate ultrasonic cleaning fluid to cover the injector tips.
   • Select "Ultrasonic Cleaning" on the display and set the desired cleaning time.
   • Започните процес чишћења.
   

   Image: Fuel injectors submerged in the ultrasonic cleaning tank, demonstrating the ultrasonic cleaning technology in action.
   

   Image: The large 67.63oz ultrasonic cleaning tank, capable of both internal and surface cleaning of fuel injectors.

2. Обрнуто испирање:

   This function cleans injectors by flowing fluid in the opposite direction of normal fuel flow. Note: Only 12V injectors are supported for reverse flushing. 70V and 120V injectors are not supported.

   • Install injectors in the opposite direction on the oil rail.
   • Select "Reverse Flushing" and initiate the process.
3. Чишћење без растављања:

   This method allows for cleaning of the combustion chamber or throttle without disassembling the injectors. It requires connection to specific C100 special parts (sold separately).

   • Connect the machine to the C100 special parts as per the C100 manual.
   • Follow the instructions on the CT500 display to perform no-disassembly cleaning.

5.2 Testing Functions

The CT500 provides 12 comprehensive testing modes to evaluate injector performance:

• Тест брзине у празном ходу: Simulates engine idling conditions.
• Medium Speed Test: Simulates medium engine speeds.
• Тест велике брзине: Simulates high engine speeds.
• Accelerating Test: Evaluates injector response during acceleration.
• Variable Speed Test: Tests performance across a range of speeds.
• Тест цурења: Checks for fuel leaks from the injector.
• Idling Spray Value Test: Measures spray volume at idle.
• Medium Speed Spray Value Test: Measures spray volume at medium speed.
• High Speed Spray Value Test: Measures spray volume at high speed.
• Pulse Injection Test: Tests short pulse injection.
• Wide Pulse Injection Test: Tests longer pulse injection.
• Continuous Injection Test: Evaluates continuous fuel flow.

During testing, the machine assesses injection volume, uniformity of injection, atomization pattern, tightness, and dripping.

Image: Visual representation of different injector testing functions, including Idle Speed Test, Accelerating Test, Variable Speed Test, Leakage Test, and Pulse Injection Test, showing fluid levels in the measuring cylinders.

Волtagе Избор: The CT500 supports 12V, 70V, and 120V voltage outputs to drive different types of injectors (GDI, EFI, FSI). Select the appropriate voltage on the control panel before testing.

Image: Illustration of the CT500's compatibility with various injector types (GDI, EFI, FSI) and the selectable voltage options (12V, 70V, 120V).

6. Одржавање

• Fluid Management: Regularly drain and replace cleaning and testing fluids to maintain optimal performance and prevent contamination. Use the oil drain handle for easy fluid removal.
• Чишћење: Wipe down the machine's exterior with a soft, damp крпом након сваке употребе. Избегавајте употребу абразивних средстава за чишћење или растварача.
• Injector Adapters: Clean injector adapters and connectors after each use to prevent residue buildup. Store them in the built-in storage drawer.
• Складиштење: Машину чувајте на сувом и чистом месту када се не користи.

Image: A detailed diagram labeling the main components of the AUTOOL CT500, including the oil drain handle, ultrasonic cleaning tank, and portable drawer.

КСНУМКС. Решавање проблема

8. Спецификације

Image: A table detailing the working environment requirements and technical parameters of the AUTOOL CT500 Fuel Injector Cleaner and Tester.

9. Гаранција и подршка

The AUTOOL CT500 Fuel Injector Cleaner and Tester Machine comes with a Три године гаранције from the date of purchase. AUTOOL is committed to providing high-quality products and customer satisfaction.

• Покриће гаранције: Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби.
• техничка подршка: AUTOOL provides доживотна техничка подршка for the CT500. If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your device, please contact AUTOOL customer service.
• Контакт информације: For any quality problems, technical assistance, or inquiries, please reach out to AUTOOL customer support. We aim to respond within 24 hours.
• Замене: In case of any defect covered under warranty, AUTOOL will provide a new replacement or suitable solution to ensure customer satisfaction.

For the most up-to-date support information and contact methods, please refer to the official AUTOOL website or the contact details provided with your product documentation.