YOOREAL YR-HM035A Temperature Measuring Cable

1. Увод

The YOOREAL YR-HM035A is a temperature measuring cable designed to provide accurate temperature readings when used in conjunction with the YOOREAL HM035A Multifunctional Meter. This cable is an essential accessory for monitoring engine temperature in various applications, ensuring optimal performance and preventing overheating.

2. Производ је готовview

The YR-HM035A temperature measuring cable is specifically designed for compatibility with the HM035A meter. It features a durable cable and a ring terminal sensor for easy attachment to temperature sources, such as spark plugs or engine blocks.

Figure 2.1: YOOREAL HM035A Multifunctional Meter with YR-HM035A Temperature Measuring Cable. The image displays the black multifunctional meter, a coiled black cable, and a smaller yellow and black cable with a copper ring terminal sensor.

3. Спецификације

4. Подешавање и инсталација

1. Connect the Cable to the Meter: Locate the designated temperature sensor input port on your YOOREAL HM035A Multifunctional Meter. Carefully insert the connector end of the YR-HM035A cable into this port, ensuring a secure connection.
2. Attach the Temperature Sensor: The YR-HM035A cable features a ring terminal sensor. This sensor is typically attached to a metal surface whose temperature you wish to measure, such as an engine block or a spark plug. Ensure the contact is firm and stable for accurate readings.
3. Осигурајте кабл: Route the cable away from moving parts, extreme heat sources, or areas where it could be pinched or damaged. Use cable ties or clips if necessary to secure it in place.

Важна напомена: The ring terminal sensor is a critical component. Handle it with care during installation to avoid damage. Ensure the connection is not overtightened, which could cause the ring to break.

5. Упутство за употребу

Once the YR-HM035A temperature measuring cable is correctly installed and connected to your HM035A meter, the meter will display temperature readings. Refer to your HM035A Multifunctional Meter's manual for detailed instructions on navigating its display modes and settings.

• Приказ температуре: The HM035A meter will show the current engine temperature.
• Промена јединица: Temperature units can be switched between Celsius (°C) and Fahrenheit (°F) directly on the HM035A meter. Consult the meter's manual for the specific button sequence.
• Overtemperature Warning: The HM035A meter is equipped with an overtemperature warning feature. If the measured temperature exceeds a preset limit, the display may change color (e.g., to red) or show a warning icon.

Figure 5.1: HM035A Meter Displaying Temperature. The meter shows 'TOT', '34.1', '28.7°C', and '18:17' with a battery icon and temperature icon.

Figure 5.2: HM035A Meter Backlight and Warning Displays. The image shows the meter with a red backlight indicating an overtemperature warning, displaying 'TOT', '1.0', '34.3°C', and '16:30'. Another display shows 'SVC Maintenance reminder' with '0.0', '34.0°C', and '16:30'.

6. Одржавање

To ensure the longevity and accuracy of your YR-HM035A temperature measuring cable, follow these maintenance guidelines:

• Редовна инспекција: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation. Check the ring terminal sensor for corrosion or physical damage.
• Сигурне везе: Ensure all connections, especially the ring terminal to the temperature source and the cable to the meter, remain secure. Loose connections can lead to inaccurate readings or intermittent operation.
• чистоћа: Keep the sensor and connectors clean and free from dirt, oil, or debris, which can affect temperature transfer and electrical conductivity.
• Заштита од влаге: While the meter itself may have some water resistance, ensure that the connection points of the cable are protected from excessive moisture to prevent internal fogging or damage.

КСНУМКС. Решавање проблема

If you encounter issues with your YR-HM035A temperature measuring cable, consider the following troubleshooting steps:

• No Temperature Reading:
  • Verify that the cable is securely connected to the HM035A meter.
  • Ensure the ring terminal sensor is firmly attached to the temperature source.
  • Check the cable for any visible damage or breaks.
• Нетачно очитавање температуре:
  • Confirm the sensor is making good contact with the surface being measured.
  • Clean the sensor and the contact area to remove any insulating debris.
  • Ensure the temperature unit (C/F) on the HM035A meter is set correctly.
• Sensor Ring Terminal Broken:
  • The ring terminal can be fragile. If it breaks, the cable will need to be replaced. Contact YOOREAL customer support for assistance.

8. Гаранција и подршка

YOOREAL products are designed for reliability and come with comprehensive support.

• техничка подршка: YOOREAL products are provided with up to 2 years of technical support.
• Услуга замене: During the 2-year support period, in case of product quality issues, YOOREAL will provide a replacement service.
• Служба за кориснике: Professional 24/7 customer support is available. The YOOREAL Care team is ready to assist you.
• Post-Amazon Return Window Support: If you encounter issues after Amazon's 30-day return window has closed, please report your concerns directly to the seller via the Amazon platform. YOOREAL will address your issue.

За додатну помоћ, посетите YOOREAL Store on Amazon или контактирајте корисничку подршку.