NJOY Echo Pro 2000 UPS Server User Manual

1. Увод

The NJOY Echo Pro 2000 is an advanced Uninterruptible Power Supply (UPS) designed to provide reliable power protection for critical equipment such as servers, workstations, and networking devices. Featuring double conversion online technology, it delivers a pure sine wave output, ensuring the highest degree of compatibility and protection for sensitive electronics. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Echo Pro 2000 UPS.

Слика 1.1: Предња страна view of the NJOY Echo Pro 2000 UPS. This image shows the main unit with its front panel display and control buttons.

2. Безбедносне информације

Please read and follow all safety instructions carefully before installing, operating, or servicing the UPS. Failure to comply with these instructions may result in electric shock, fire, or serious injury.

• електрична безбедност: The UPS contains hazardous voltagНе покушавајте да расклапате уређај. Сервисирање треба да обавља само квалификовано особље.
• Безбедност батерије: Batteries can present a risk of electrical shock and high short-circuit current. Observe proper polarity when connecting batteries. Do not dispose of batteries in a fire.
• Окружење: Install the UPS in a well-ventilated area, free from excessive dust, humidity, and corrosive substances. Avoid direct sunlight and heat sources.
• уземљење: Ensure the UPS is properly grounded to prevent electrical shock.
• Искључивање у случају нужде (ЕПО): Familiarize yourself with the EPO function for immediate shutdown in emergencies.

3. Производ је готовview

3.1 Кључне карактеристике

• Double Conversion Online Technology: Provides continuous, clean power by converting incoming AC to DC and then back to AC, isolating connected equipment from utility power fluctuations.
• Излаз чистог синусног таласа: Ensures compatibility with all types of electronic loads, preventing distortion and electrical noise.
• Низак ниво буке: Operates at less than 40 dB, suitable for office environments.
• Управљање софтвером: Includes specialized software for remote monitoring, scheduled power on/off, battery tests, and complete UPS configuration.
• Комуникациони портови: Equipped with RS232, HID USB, and EPO ports. An optional SNMP card slot is available for advanced network monitoring.
• Унутрашње батерије: Features 4 x 12V7Ah sealed lead-acid batteries for reliable backup power.

3.2 Прикључци задње плоче

Figure 3.1: Rear panel of the NJOY Echo Pro 2000 UPS, showing various connection ports.

1. РС232 интерфејс: За серијску комуникацију са рачунаром или мрежним уређајем.
2. Schuko Outlets (x4): Output receptacles for connecting protected equipment.
3. Улазни прекидач: Overcurrent protection for the UPS input.
4. Лепеза: Cooling fan for internal components.
5. SNMP Slot: Expansion slot for an optional SNMP card (not included) for network management.
6. EPO (Emergency Power Off): Connector for remote emergency shutdown.
7. УСБ интерфејс: For USB communication with a computer.
8. АЦ улаз: Power input connector for the UPS.

4. Подешавање

Follow these steps to properly set up your NJOY Echo Pro 2000 UPS:

1. Распакивање: Carefully unpack the UPS and inspect it for any shipping damage. Report any damage to your dealer.
2. Пласман: Place the UPS in a clean, dry, and well-ventilated indoor environment. Ensure adequate clearance around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3. Прво пуњење: Connect the UPS to a grounded AC power outlet using the provided power cord. Allow the UPS to charge for at least 8 hours before connecting any equipment to ensure optimal battery performance. The LCD display will indicate charging status.
4. Опрема за повезивање: Once the UPS is fully charged, connect your critical equipment (servers, computers, monitors, etc.) to the Schuko output receptacles on the rear panel. Do not connect surge suppressors or power strips to the UPS output.
5. Подешавање комуникације: For monitoring and management, connect the UPS to your computer using the provided USB or RS232 cable. Install the specialized management software (refer to Section 5.2).
6. EPO Connection (Optional): If using the Emergency Power Off function, connect the EPO cable to the designated port.

5. Упутство за употребу

5.1 Укључивање/искључивање

• За укључивање: Press and hold the 'ON' button on the front panel for approximately 2 seconds until the UPS powers on and the LCD display illuminates.
• За искључивање: Press and hold the 'OFF' button for approximately 2 seconds. The UPS will shut down, and the display will turn off.

5.2 LCD екран и контролна дугмад

The front panel LCD provides real-time status information. Use the 'ENTER' and 'ESC' buttons to navigate through the display menus and view various parameters such as input/output voltage, battery level, load level, and operating mode.

5.3 Управљање софтвером

The included software allows for comprehensive monitoring and control of the UPS. Install the software on a connected computer to:

• Monitor real-time UPS status and parameters.
• Schedule automatic power on/off and battery tests.
• Configure UPS settings and alarm thresholds.
• Receive notifications for power events.
• Perform safe shutdown of connected computer systems during extended power outagес.

Слика 5.1: Прample of the UPS management software interface, showing status and configuration options.

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your UPS.

• Одржавање батерије: The UPS contains sealed lead-acid batteries. These batteries typically last 3-5 years under normal operating conditions. Replace batteries when their runtime significantly decreases. Only use replacement batteries of the same type and rating (4 x 12V7Ah). Battery replacement should be performed by qualified service personnel.
• Чишћење: Keep the UPS clean and free of dust. Use a dry cloth to wipe the exterior. Do not use liquid cleaners or solvents. Ensure ventilation openings are clear of obstructions.
• Услови животне средине: Maintain the UPS within the recommended operating temperature and humidity ranges to prolong its lifespan.
• Самотестирање: Periodically perform a battery self-test using the management software or front panel controls to assess battery health.

КСНУМКС. Решавање проблема

This section provides solutions to common issues you might encounter with your UPS. If the problem persists, contact technical support.

8. Спецификације

Figure 8.1: Runtime autonomy chart for the NJOY Echo Pro 2000 UPS. This chart illustrates the approximate backup duration at different load levels. For example, at 1600W (100% load), the runtime is approximately 1 minute, while at 400W (25% load), it is approximately 17 minutes.

9. Информације о гаранцији

For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official NJOY webсајт. Сачувајте доказ о куповини за потребе гаранције.

10. Подршка

If you require technical assistance or have questions regarding your NJOY Echo Pro 2000 UPS, please contact NJOY customer support through their official webсајт или контакт информације наведене у документацији вашег производа.