Увод
Тхе Вampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
Производ је завршенview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
Слика 1: Фронт view од Вampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
Слика 2: Англед view од Вampler Catacombs pedal, highlighting its compact design and various control knobs.
Сетуп
Захтеви за напајање
Тхе Вampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
Connecting Your Pedal
- Повежите свој инструмент (нпр. гитару) са МОНО ИН or СТЕРЕО ИН прикључак на десној страни педале користећи стандардни инструментални кабл од 1/4 инча.
- Повежите МОНО ОУТ or Стерео Оут дизалицу са леве стране педале до вашег amplifier or next effect pedal.
- Connect the 9V DC power supply to the 9В ДЦ улазни прикључак.
- For MIDI control, connect a MIDI cable to the МИДИ унос.
Упутство за употребу
Цонтролс Оверview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
Чување и позивање пресета
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
Одржавање
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Чувајте педалу на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
- Искључите напајање када се не користи дуже време.
- Редовно проверавајте све кабловске спојеве да ли су безбедно причвршћени.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема звука када је педала притиснута. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Incorrect footswitch operation. | Уверите се да држите Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | Ground loop, faulty power supply, interference. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
Спецификације
- Модел: CATACOMBS
- Димензије: 7.25 к 5.7 к 3.75 инча
- Тежина артикла: 1.39 фунти
- Извор напајања: Corded Electric (9V DC, center-negative, power supply not included)
- Формат сигнала: Аналог
- Audio Output Effects: Делаи, Реверб
- Sampлинг рате: 48 кХз
- Audio Bit Depth: 24-битни
- Пресетс: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
Гаранција и подршка
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampлер Педале webсајт или директно контактирајте њихову корисничку службу. Сачувајте доказ о куповини за потребе гаранције.
За даљу помоћ, посетите Wampler Store on Amazon.