Јахитек ЈТ-001274051

Yaheetech Armless Desk Chair User Manual

Модел: ИТ-001274051

1. Безбедносне информације

УПОЗОРЕЊЕ: Овај производ вас може изложити хемикалији ди(2-етилхексил)фталат (DEHP) и олово за које је у држави Калифорнији познато да изазивају рак и урођене мане или друге репродуктивне штете. За више информација посетите ввв.П65Варнингс.ца.гов/фурнитуре.

Always ensure all components are securely fastened before use. Do not stand on the chair. Do not use the chair if any parts are damaged or missing.

2. Подешавање и монтажа

Minimal assembly is required for your Yaheetech Armless Desk Chair. Typically, this involves attaching the casters to the base and securing the seat and backrest components.

2.1 Распакивање и провера компоненти

Carefully unpack all components from the box. Verify that all parts listed in the packaging contents are present and undamaged.

2.2 Important Pre-Assembly Step: Remove Plastic Cap

Before assembling, locate the pneumatic cylinder (gas lift). There is a black plastic cap on the top of the cylinder that мора бити уклоњен prior to installation. Failure to remove this cap will prevent the chair's height adjustment mechanism from functioning correctly.

Image showing a hand removing a black plastic cap from the top of a silver pneumatic cylinder.

Figure 2.2.1: Removing the protective plastic cap from the pneumatic cylinder.

2.3 Кораци монтаже

Follow the visual guide below for step-by-step assembly. The process typically takes around 15 minutes.

Diagram showing six steps for assembling the office chair, including attaching wheels to the base, inserting the gas lift, attaching the mechanism to the seat, and connecting the backrest.

Figure 2.3.1: Visual guide for chair assembly.

Video 2.3.1: Detailed instructions on how to install the Modern Tufted Office Chair.

Video 2.3.2: Important reminder to remove the black plastic cap before assembly.

3. Упутство за употребу

Your Yaheetech Armless Desk Chair is designed for comfort and flexibility in various settings.

3.1 Adjustable Seat Height

The chair features an adjustable seat height with a range of 4 inches. To adjust the height, locate the lever under the seat. Pull the lever upwards while seated to lower the chair, or pull the lever upwards while standing to raise the chair. Release the lever to lock the height in place.

3.2 Rocking Function and Back Tilt

The chair offers a rocking function and an adjustable back tilt angle (90°-110°). To enable the rocking function, pull out the lever located under the seat. To lock the backrest in an upright position, push the lever inwards. The tension of the rocking function can be adjusted by turning the round knob under the seat.

Image showing the adjustable back tilt angle of the chair from 90 to 110 degrees, with an inset showing the control knob for tilt tension and the lever for height adjustment.

Figure 3.2.1: Adjustable back tilt and control mechanisms.

3.3 360° Swivel and Rolling Wheels

The chair is equipped with a 360° swivel function, allowing for easy rotation. The five polypropylene casters ensure smooth and effortless movement across hard floor surfaces, providing flexibility to move around your workspace.

Video 3.3.1: Demonstration of the Yaheetech Modern Faux Leather Office Chair's features, including swivel and height adjustment.

4. Одржавање и њега

Правилна нега ће продужити век трајања и изглед ваше столице.

4.1 Упутства за чишћење

The chair's faux leather upholstery is water-resistant and easy to maintain. For general cleaning, simply wipe clean with a damp крпа. Избегавајте употребу јаких хемикалија или абразивних средстава за чишћење, јер могу оштетити материјал.

Close-up image of a hand wiping the white faux leather seat of the chair with a cloth, highlighting its water-resistant and easy-to-clean properties.

Figure 4.1.1: Cleaning the water-resistant faux leather.

4.2 Опште одржавање

Regularly check all screws and bolts to ensure they are tight. Re-tighten if necessary. Inspect the casters periodically for any debris that might hinder smooth rolling and clean as needed.

КСНУМКС. Решавање проблема

Ако наиђете на било какве проблеме са столицом, погледајте следећа уобичајена решења:

  • Подешавање висине не ради: Ensure the black plastic cap on the pneumatic cylinder was removed during assembly. If not, disassemble the chair, remove the cap, and reassemble.
  • Chair Does Not Roll Smoothly: Check the casters for any hair, dust, or debris that may be obstructing their movement. Clean the casters thoroughly. Ensure the chair is used on a suitable surface (recommended for hard floors).
  • Столица је нестабилна: Verify that all screws and bolts are securely tightened. Ensure the chair is placed on a flat, even surface.

6. Спецификације

Below are the key specifications for your Yaheetech Armless Desk Chair (Model: YT-001274051):

Diagram showing the dimensions of the Yaheetech Armless Desk Chair, including width, depth, and adjustable height ranges for the seat and backrest.

Figure 6.1.1: Chair dimensions.

ФеатуреДетаљ
БрандИахеетецх
Назив моделаИТ-001274051
БојаБела
МатеријалВештачка кожа, пена (материјал за пуњење)
Димензије производа24.5"Д к 21.5"Ш к 37"В
Величина21.5” Ш × 24.5” Д × (33-37)” В
Бацк СтилеЧврста леђа
Посебне карактеристикеПодесива висина, ергономски, уштеда простора
Препорука за максималну тежину300 фунти
СтилеБез руку
Арм СтилеБез руку
Препорука за површинуХард Флоор
Кретање основе намештајаСвивел
НагињањеДа
Тежина артикла19.62 фунти

7. Гаранција и подршка

For warranty information or customer support regarding your Yaheetech Armless Desk Chair, please refer to the documentation included with your purchase or visit the official Yaheetech website. You may also contact Yaheetech customer service directly for assistance with product inquiries, parts, or service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.