1. Увод
This manual provides essential information for the safe and effective operation of your HTVRONT Auto Tumbler Heat Press Machine. Designed for sublimation printing, this machine automatically applies ideal pressure for various drinkware, ensuring efficient and high-quality results. Please read these instructions thoroughly before use.
Image: HTVRONT Auto Tumbler Heat Press Machine, showcasing its compact design and included accessories.
2. Безбедносне информације
- Аутоматско искључивање: The machine powers down after 15 minutes of inactivity to prevent overheating and conserve energy.
- Хитно заустављање: Press the 'R' button to instantly halt heating and release the heat pad, ensuring user safety and preventing burns.
- Рукавице отпорне на топлоту: Always use the provided heat-resistant gloves when handling hot items or the heat press components.
- вентилација: Рукујте машином у добро проветреном простору.
- Површина: Place the heat press on a stable, heat-resistant surface.
- Не додирујте вруће површине: Avoid direct contact with the heating element during and immediately after operation.
- Волtage: Ensure the machine is connected to a 120V power outlet.
3. Шта је укључено
- Auto Tumbler Heat Press x1
- Heat-resistant Gloves x1 pair
- Heat-resistant Tape x1 roll
- Упутство за употребу к1
Image: The complete package contents of the HTVRONT Auto Tumbler Heat Press Machine.
4. Спецификације
| Феатуре | Валуе |
|---|---|
| Препоручена употреба | Sublimation printing on drinkware (tumblers, mugs, water bottles, sippy cups) |
| Горња оцена температуре | 390°Ф (200°Ц) |
| Волtage | 120 Волтс |
| Ватtage | 600 вати |
| Димензије производа | 32.7 цм x 27.7 цм x 16 цм |
| Тежина артикла | 10.65 фунте (4.84 кг) |
| Compatible Tumbler Diameter | 2.95 инча (7.5 цм) до 3.18 инча (8.1 цм) |
| Compatible Tumbler Volume | 280ml - 850ml (11-30oz) |
| Материјал | АБС шкољка |
Image: Visual guide for compatible tumbler dimensions and sizes.
5. Подешавање
- Raspakujte: Пажљиво извадите све компоненте из амбалаже. Сачувајте амбалажу за будуће складиштење или транспорт.
- Пласман: Position the heat press on a flat, stable, and heat-resistant surface in a well-ventilated area.
- Прикључак за напајање: Connect the power cord to the machine's inlet and then to a standard 120V, 60Hz electrical outlet.
- Почетно укључивање: Flip the power switch located at the back of the machine to the 'ON' position. The digital display will illuminate.
6. Упутство за употребу
6.1. Preparing Your Item
- Ensure your tumbler's diameter is between 2.95 and 3.18 inches.
- Wrap your sublimation design tightly around the tumbler and secure it with heat-resistant tape.
6.2. Подешавање температуре и времена
- Use the 'Mode' button to cycle through preset temperature and time settings, or manually adjust using the '+' and '-' buttons for temperature and time.
- Refer to the Quick Reference Chart below for recommended settings based on material.
6.3. Pressing Cycle
- Once settings are confirmed, carefully slide the prepared tumbler into the heating chamber. The machine will automatically detect the tumbler and apply appropriate pressure.
- Press the 'Enter' button to begin the heating cycle. The machine will automatically heat and press the design.
- The digital display will show the countdown.
6.4. Removing the Tumbler
- Upon completion of the cycle, the machine will automatically release the pressure and open.
- Wearing heat-resistant gloves, carefully remove the hot tumbler from the machine.
- Allow the tumbler to cool completely before removing the sublimation paper and tape.
Image: Control panel showing temperature and time settings.
6.5. Quick Reference Chart
| Osnovni materijali | Време | Температура |
|---|---|---|
| Чаша од нерђајућег челика | 130±20 с | Највиша: 370°Ф±10°Ф |
| Церамиц Тумблер | 400±20 с | Највиша: 385°Ф±10°Ф |
| Гласс Тумблер | 300±20 с | Највиша: 370°Ф±10°Ф |
Note: These are general guidelines. Optimal settings may vary based on specific materials and sublimation paper.
7. Одржавање
- Чишћење: Always unplug the machine and allow it to cool completely before cleaning. Wipe the exterior with a soft, damp крпа. Не користите абразивна средства за чишћење нити потапајте машину у воду.
- Складиштење: Store the heat press in a dry, dust-free environment when not in use.
КСНУМКС. Решавање проблема
- Uneven Heating/Ghosting: Ensure the sublimation paper is tightly wrapped around the tumbler with no gaps or wrinkles. Verify the tumbler diameter is within the recommended range (2.95-3.18 inches) for optimal pressure application.
- Tumbler Difficult to Remove: This may occur with mugs slightly larger than the recommended diameter. Ensure you are using heat-resistant gloves and carefully extract the item. Avoid forcing the tumbler.
- Машина се не укључује: Check that the power cord is securely plugged into both the machine and a functioning 120V outlet. Ensure the power switch is in the 'ON' position.
- Функција аутоматског искључивања: If the machine powers off unexpectedly, it may be due to 15 minutes of inactivity. Simply turn it back on.
9. Гаранција и подршка
HTVRONT is committed to providing excellent customer service. Should any issues arise with your Auto Tumbler Heat Press Machine, please contact HTVRONT customer support for assistance. They will work to provide a solution to ensure your satisfaction.
For support, please refer to the contact information provided in your product packaging or visit the official HTVRONT webсајту.