ACASIS M.2 NVMe SSD Cloner User Manual

Увод

Хвала вам на куповиниasing the ACASIS M.2 NVMe SSD Cloner. This dual-bay device is designed to provide a convenient and efficient solution for cloning M.2 NVMe Solid State Drives offline, as well as for online data transfer. With its built-in cooling fan and robust aluminum construction, it ensures stable and reliable performance while protecting your valuable data.

Молимо вас да пажљиво прочитате ово упутство пре употребе производа како бисте осигурали правилан рад и максимално продужили његов век трајања.

Безбедносне информације

• Држите уређај даље од воде, влаге и екстремних температура.
• Не покушавајте да растављате или модификујете уређај. То ће поништити гаранцију и може проузроковати оштећење.
• Користите само испоручени адаптер за напајање и каблове.
• Обезбедите одговарајућу вентилацију током рада како бисте спречили прегревање.
• Always back up important data before performing any cloning or data transfer operations.
• This device is designed for M.2 NVMe SSDs only. It is not compatible with SATA M.2 SSDs.

Садржај пакета

Молимо вас да проверите садржај пакета како бисте били сигурни да су сви предмети присутни:

• ACASIS M.2 NVMe SSD Cloner (EC-6604)
• Повер Адаптер
• USB-C to USB-C/USB-A Cable
• Упутство за употребу

Производ је завршенview

Familiarize yourself with the components and indicators of the ACASIS M.2 NVMe SSD Cloner:

This image illustrates the key components of the ACASIS M.2 NVMe SSD Cloner, including the Source (A) and Target (B) slots, Power button, Clone button, and progress indicator lights.

• Source Slot (A): Insert the SSD containing the data you wish to clone.
• Target Slot (B): Insert the SSD where the cloned data will be written. The target SSD must be equal to or larger in capacity than the source SSD.
• Дугме за напајање: Укључује/искључује уређај.
• Clone Button: Initiates the offline cloning process.
• Progress Indicators (25%, 50%, 75%, 100%): Show the cloning progress.
• Source/Target Indicators: Light up when SSDs are properly inserted.
• УСБ-Ц порт: For connecting to a computer for online data transfer.
• ДЦ 5В порт: За повезивање адаптера за напајање.

Сетуп

Пратите ове кораке за почетно подешавање:

1. Прикључите напајање: Plug the provided power adapter into the DC 5V port on the cloner and then into a wall outlet.
2. Open Lids: Press the open buttons on the sides of the cloner to release the top lids, revealing the SSD slots.
3. Insert SSDs: Gently insert your M.2 NVMe SSDs into the designated slots. Ensure they are fully seated. For offline cloning, insert the source SSD into Slot A and the target SSD into Slot B. For online data transfer, you can insert one or two SSDs as needed.
4. Затворите поклопце: Close the top lids until they click securely into place.
5. Connect to Computer (Optional for Online Transfer): If you plan to use the device for online data transfer, connect the cloner to your computer using the provided USB-C cable.

This image illustrates the four steps for installing SSDs into the ACASIS M.2 NVMe SSD Cloner, from opening the device to inserting the drives and connecting the cable.

Упутство за употребу

Оффлине Цлонинг

Offline cloning allows you to duplicate an SSD without connecting the cloner to a computer. The target SSD must have a capacity equal to or greater than the source SSD.

1. Prepare SSDs: Ensure the source SSD is inserted into Slot A and the target SSD into Slot B. Important: All data on the target SSD will be erased during the cloning process. Please back up any important data from the target SSD before proceeding.
2. Укључено: Press the Power button on the cloner. The Power indicator light will illuminate.
3. Initiate Cloning: Press and hold the Clone button for approximately 5 seconds until the progress indicator lights (25%, 50%, 75%, 100%) begin to flash sequentially. This indicates the cloning process has started.
4. Пратите напредак: The indicator lights will show the cloning progress. Each light will turn solid as that percentage of the cloning is completed.
5. Cloning Complete: Once the 100% indicator light remains solid (no longer flashing), the cloning process is complete.
6. Искључивање: Press and hold the Power button until the device turns off. You can now safely remove the SSDs.

This image demonstrates the one-click offline cloning function, highlighting the clone button and the SSDs in their respective slots.

Напомена: For Windows users, after cloning to a larger drive, you may need to extend the partition in Disk Management to utilize the full capacity of the new SSD. SteamOS typically handles this automatically.

Online Data Transfer

The cloner can also function as a dual-bay M.2 NVMe enclosure for online data transfer when connected to a computer.

1. Повежите се са рачунаром: Ensure the cloner is powered on and connected to your computer via the USB-C cable.
2. Insert SSDs: Insert one or two M.2 NVMe SSDs into the slots. The cloner will be recognized as external drives by your operating system.
3. Пренесите податке: You can now access and transfer files to and from the inserted SSDs as you would with any external storage device.

This image shows the ACASIS M.2 NVMe SSD Cloner connected to a laptop, illustrating its use for high-speed online data transfer via its USB 3.2 interface.

The device supports data transfer speeds up to 10Gbps, with tested read speeds of approximately 924MB/s and write speeds of 1052MB/s (actual speeds may vary based on SSD and system configuration).

Одржавање

To ensure the longevity and optimal performance of your ACASIS M.2 NVMe SSD Cloner, follow these maintenance guidelines:

• Чишћење: Користите меку, суву крпу за чишћење спољашњости уређаја. Не користите течна средства за чишћење или аеросоле.
• Вентилатор за хлађење: The built-in cooling fan helps maintain optimal operating temperatures. Ensure the fan vents are not obstructed. The fan automatically activates during intensive operations like cloning.

This image highlights the upgraded built-in cooling fan and its effectiveness in maintaining lower operating temperatures compared to devices without active cooling.

Решавање проблема

If you encounter issues with your ACASIS M.2 NVMe SSD Cloner, refer to the following common problems and solutions:

Спецификације

This image details the compatibility of the cloner with different M.2 NVMe SSD sizes (2230, 2242, 2260, 2280) and M-Key/M&B-Key NVMe/PCIe interfaces.

Гаранција и подршка

ACASIS products come with a standard warranty. For detailed warranty information, please refer to the warranty card included in your package or visit the official ACASIS webсајту.

If you have any questions, require technical assistance, or need to report an issue, please contact our customer support team:

• Емаил: суппорт@ацасис.цом
• Радно време: 7x24 hours online service anytime

We are committed to providing high-quality service and support to ensure your satisfaction.