ATOMSTACK A24 Pro Laser Engraver and Cutter User Manual

1. Увод

This manual provides essential information for the safe and efficient operation of your ATOMSTACK A24 Pro Laser Engraver and Cutter. Please read this manual thoroughly before operating the machine and keep it for future reference.

The ATOMSTACK A24 Pro is a high-power 20W laser engraving and cutting machine, featuring a 0.06 x 0.06 mm ultra-fine laser focus area. It is designed for precise engraving and efficient cutting of various materials, including wood, acrylic, and certain metals, with cutting capabilities comparable to a 300W CO₂ laser engraving machine.

2. Мере предострожности

Operating a laser machine requires strict adherence to safety guidelines to prevent injury and damage. Always prioritize safety.

• Заштита очију: The laser module includes a protective cover to shield the user's eyes. However, it is highly recommended to wear additional certified laser safety goggles during operation.
• вентилација: Ensure adequate ventilation in the work area to dissipate fumes and smoke produced during engraving and cutting.
• Безбедност материјала: Гравирајте или сеците само материјале који су означени као безбедни за ласерску обраду. Избегавајте материјале који производе токсичне паре или су лако запаљиви.
• Опасност од пожара: Keep a fire extinguisher nearby. Never leave the machine unattended during operation.
• Деца и кућни љубимци: Keep children and pets away from the machine during operation. The laser protective cover helps prevent accidental contact with the laser point.
• Напајање: Use only the provided power adapter. Ensure the power supply meets the machine's requirements (AC 100-240 V, 50/60 Hz, Output: 24 V, 5 A).
• Хитно заустављање: Упознајте се са положајем и функцијом дугмета за хитно заустављање.

3. Компоненте производа

The ATOMSTACK A24 Pro comes with the following components:

• 1 x ATOMSTACK A24 Pro Laser Engraving Machine Frame
• 1 x Laser Module
• 1 x Cable Chain
• 1 к вијак за причвршћивање
• 1 к сет алата
• 1 x Fixed Focus Film
• 3 x Acrylic Plates
• 3 x Wood Chips
• 10 к Кабелске везице
• 1 x Desikant
• КСНУМКС к четка
• 1 x Dust-free Cloth
• 1 к адаптер за напајање
• 1 x Упутство за употребу (овај документ)
• 1 x Data Cable (USB)

Слика: Прекоview of the accessories and components included with the ATOMSTACK A24 Pro.

4. Водич за подешавање

The ATOMSTACK A24 Pro features a unibody aluminum alloy casting, requiring no complex installation. It is designed for immediate use.

1. Распакивање: Пажљиво извадите све компоненте из паковања. Проверите да ли је дошло до оштећења током транспорта.
2. Пласман: Place the machine on a stable, level, and heat-resistant surface in a well-ventilated area. Ensure sufficient space around the machine for operation and material handling.
3. Прикључак за напајање: Connect the provided power adapter to the machine's power input and then to a suitable electrical outlet.
4. УСБ веза: Connect the machine to your computer using the supplied USB data cable.
5. Инсталација софтвера: Install the recommended operating software (LaserGRBL or LightBurn) on your computer. The machine supports Win XP/Win 7/Win 8/XP/Win 10 systems. Refer to the software's documentation for installation and setup.
6. Fixed Focus Adjustment: The laser module features a fixed-focus design, eliminating the need for manual focus adjustment. For initial setup or specific material thickness, use the provided fixed focus film to ensure optimal laser performance.

Image: The ATOMSTACK A24 Pro laser engraver, ready for operation.

5. Упутство за употребу

This section outlines the general steps for operating your ATOMSTACK A24 Pro.

1. Припремите свој дизајн: Create or import your design using your chosen software (LaserGRBL, LightBurn). Supported file formats include NC, BMP, JPG, PNG, DXF.
2. Постављање материјала: Place the material to be engraved or cut onto the working area of the machine. Ensure it is flat and securely positioned.
3. Позиционирање: Utilize the cross-positioning system for precise and horizontal engraving. This system aids in visual edge finding and object alignment.

Image: Cross positioning system for accurate material placement.
4. Подешавања софтвера: Adjust laser power, speed, and passes in your software based on the material type and desired effect. The A24 Pro offers high precision (0.02 mm) and high-speed operation (up to 36000 mm/min).


Image: High-speed engraving capability of the ATOMSTACK A24 Pro.

5. Почетак операције: Once all settings are confirmed and safety precautions are in place, initiate the engraving or cutting process from your software.
6. Надгледање: Continuously monitor the machine during operation. Be prepared to use the emergency stop if any issues arise.
7. Завршетак: After the process is complete, allow the material to cool if necessary before handling. Disconnect the machine from power when not in use.

5.1. Engraving and Cutting Capabilities

The ATOMSTACK A24 Pro is equipped with a 24W optical power laser module, utilizing second-generation fiber compression packaging technology for an ultra-fine laser spot of 0.06 x 0.06 mm. This allows for powerful cutting and fine engraving.

Image: Comparison of laser spot size, highlighting the A24 Pro's precision.

Image: Demonstration of the A24 Pro's high precision engraving.

Engravable Materials:

• Wood, Bamboo, Cardboard, Plastic, Leather, PCB, Aluminum Oxide, Non-reflective Electroplated and Painted Metal, 304 Mirror Stainless Steel, Glass, Ceramic, Cotton Cloth, Slate.

Cuttable Materials:

• Cardboard, Non-woven Fabrics, Wood Boards, Plywood (up to 20mm), Acrylic (transparent acrylic needs to be painted black, up to 30mm black acrylic), Some Thin Plastic Boards, Sponges, Aluminum and Stainless Steel (up to 0.05mm thick), and other metal sheets.

Слика: прamples of maximum cutting thickness for various materials.

Image: Illustration of the long beam waist laser for enhanced deep cutting.

Image: Close-up of the Second Generation Packaged Blue Laser module.

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK A24 Pro.

• Чишћење сочива: The laser module features a dual-layer wind cover design to prevent the lens from being blocked or soiled. However, periodic inspection and gentle cleaning of the laser lens with the provided dust-free cloth are recommended to maintain laser efficiency.
• Уклањање прашине: Regularly clean dust and debris from the machine's frame and moving parts using the provided brush or compressed air. Accumulation of dust can affect performance and lead to wear.
• Rail Lubrication: Periodically check the X-axis guide rail for smooth movement. If necessary, apply a small amount of appropriate lubricant to ensure frictionless operation.
• Ажурирања фирмвера: Check the official ATOMSTACK website for any available firmware updates for the 32-bit motherboard to ensure you have the latest features and performance enhancements.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи и њиховим могућим решењима.

8. Техничке спецификације

9. Информације о гаранцији

ATOMSTACK products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official ATOMSTACK website. Typically, products are eligible for a refund or replacement within 30 days of purchase, subject to the seller's return policy.

10. Корисничка подршка

If you encounter any issues or have questions not covered in this manual, please contact ATOMSTACK customer support. Refer to the contact information provided on the product packaging or the official ATOMSTACK webсајт за најновије канале подршке.

When contacting support, please have your product model (ATOMSTACK A24 Pro) and serial number (if applicable) ready.