1. Увод
Thank you for choosing the DIHOOL Electric Scissor Lift Table, Model DHLCT-150. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new lift table. Please read this manual thoroughly before use and retain it for future reference.
2. Безбедносне информације
Always prioritize safety when operating the lift table. Failure to follow these instructions may result in injury or damage to the equipment.
- Капацитет тежине: Do not exceed the maximum load capacity of 350 lbs (150 kg). Overloading can cause instability and damage.
- Стабилна површина: Ensure the lift table is placed on a flat, stable, and level surface before operation.
- Детекција препрека: The system includes obstruction/resistance detection. If an unusual current spike is detected, the lift will stop or rebound to prevent accidents. Do not intentionally obstruct the lift during operation.
- Извор напајања: Use the provided AC100-240V adapter or a DC24V-30V power source. If using a 12V power source, a 12V to 24V DC step-up converter (120W+ required) is necessary.
- Континуирани рад: Avoid continuous long-term operation. The maximum continuous runtime is 20 minutes to prevent motor overheating.
- Деца и кућни љубимци: Keep children and pets away from the lift table during operation.
- Одржавање: Regularly inspect the lift table for any signs of wear or damage. Do not operate if damaged.
- Хитно заустављање: Familiarize yourself with how to quickly disconnect power in an emergency.
3. Садржај пакета
Проверите да ли су све компоненте присутне приликом распакивања:
- Electric Scissor Lift Table (main unit)
- DC Motor Controller (Model: IPS-S2)
- Wireless Remote Controller (battery not included, Model 23A)
- Wired Handle Controller (2.5m cable)
- АЦ/ДЦ адаптер за напајање
- Adjustable Feet (pre-installed or to be installed)
4. Производ је готовview и карактеристике
The DIHOOL Electric Scissor Lift Table is designed for versatile lifting applications, offering quiet operation and robust construction.
- Велики капацитет: Supports loads up to 350 lbs (150 kg).
- Подесива висина: Lifting stroke of 19.09 inches (485mm), adjusting from 7.68 inches (195mm) to 26.77 inches (680mm).
- Тих рад: Equipped with an upgraded high-torque motor, operating under 50dB.
- Сигурносне карактеристике: Obstruction/resistance detection, self-locking function, and built-in limit switch.
- Методе контроле: Wireless remote, wired handle, and WiFi control via eWelink APP.
- Издржљива конструкција: Built with robust steel materials and an X-shaped frame for stability.
5. Спецификације
| Феатуре | Спецификација |
|---|---|
| Модел | DHLCT-150 |
| Капацитет оптерећења | 150kg / 330lbs (Note: Product title states 350lbs, specifications state 330lbs. Refer to product listing for exact model capacity.) |
| Брзина без оптерећења | 10mm/s, 0.4inch/s |
| Мин Хеигхт | 195 мм / 7.68 инча |
| Мак Хеигхт | 680 мм / 26.77 инча |
| Мождани удар | 485 мм / 19.09 инча |
| Величина (Д*Ш*В) | 760*430*195 мм / 29.92*16.93*7.68 инча |
| Тежина | 16kg / 35lbs (Product listing states 37.4 pounds) |
| Волtage | ДЦ 24В |
| Површинска обрада | Елецтропхоретиц Блацк |
| Радна температура | -10°Ц ~ +65°Ц |
| ИП Граде | ИП43 |
6. Подешавање и инсталација
The DIHOOL Electric Scissor Lift Table comes pre-assembled and pre-wired for ease of use. Follow these steps for initial setup:
6.1 Распакивање и постављање
- Пажљиво уклоните све компоненте из паковања.
- Place the lift table on a stable, level surface where it will be used.
- Ensure there is sufficient clearance around the table for safe operation and to avoid obstructions.
6.2 Connecting Power and Controls
- Connect the DC Motor Controller to the lift table's motor and power input. The unit is pre-wired, so simply ensure connections are secure.
- Plug the AC/DC Power Supply Adapter into the DC Motor Controller.
- Plug the AC/DC Power Supply Adapter into a standard AC 100-240V wall outlet.
- Connect the wired handle controller to the designated port on the DC Motor Controller.
- For wireless remote control, ensure a Model 23A battery is inserted (not included).
- For WiFi control, download the eWelink APP from your device's app store and follow the in-app instructions to pair with the controller.
7. Упутство за употребу
The lift table offers multiple control options for convenience and flexibility.
7.1 DC Motor Controller (IPS-S2) Overview
The IPS-S2 controller features a digital display and several buttons for direct control and setting adjustments:
- Б1: UP button for lifting the platform.
- Б2: DOWN button for lowering the platform.
- K1, K2, K3: Function setting buttons.
- L: Standby time setting.
7.2 Functional Operation and Settings
The controller allows for advanced settings to customize operation and safety:
| Функцијски код | Опис функције | Опсег вредности | Подразумевана вредност |
|---|---|---|---|
| A | Current Limit For Up (Set the limited current value for the moving up (Amp)) | А00.1-А10.0 | 4.2 |
| B | Current Limit For Down (Set the limited current value for the moving down (Amp)) | Б00.1-Б10.0 | 1 |
| C | Running Time (Set the running time of the motor (Seconds)) | Ц000-Ц999 | 80 |
| D | Current Limit For Rebound (Set the Current Rate of Change for moving down (Amp)) | Д00.1-Д02.0 | 00.3 |
| E | Rebound Time (Set the running time during rebound (Seconds)) | Е001-Е999 | 001 |
| F | Reduce Voltage For Down (Set the Reduce percentagе од волtage during lifting down (Percentagе)) | ФКСНУМКС-ФКСНУМКС | 093 |
| L | Standby Time (Set the standby time of the screen (Minutes)) | Л000-Л999 | 005 |
To enter function settings, press the K1 button for 3 seconds. Use K2 and K3 to adjust values. The limited current value can be adjusted based on actual operation conditions. For initial use, the current for the first time running may be higher; you can set a lower current value after several runs. This helps prevent motor damage and extends equipment lifespan.
7.3 Методе контроле
- Бежични даљински: Use the UP and DOWN buttons on the remote to control the lift. The remote has a range of up to 30 meters.
- Wired Handle: Use the UP and DOWN buttons on the wired handle for direct control. The cable length is 2.5m.
- Controller Buttons: Use the B1 (UP) and B2 (DOWN) buttons directly on the IPS-S2 controller.
- eWelink APP (WiFi Control): Download the eWelink APP to control the lift via WiFi. This allows for advanced features and automation.
- External Switches: The controller supports connection to external switches such as Photoelectric Switch, Inductive Switch, Push Button, Pedal Button, or Relays for customized control.
- Аутоматско подизање: Can be configured to achieve automatic lifting based on control signals.
- Режим изложбе: Can be set to run automatically for exhibition displays.
8. Одржавање
Regular maintenance ensures the longevity and safe operation of your DIHOOL Electric Scissor Lift Table.
- Чишћење: Wipe down the lift table with a damp тканина. Избегавајте употребу јаких хемикалија или абразивних средстава за чишћење.
- подмазивање: Periodically lubricate the scissor mechanism pivot points and the linear actuator screw with a suitable lubricant to ensure smooth operation and prevent wear.
- инспекција: Regularly check all bolts, nuts, and connections for tightness. Inspect the power cable and control cables for any signs of damage or fraying.
- Motor and Actuator: Listen for unusual noises during operation. If any abnormal sounds or movements occur, discontinue use and troubleshoot.
- Складиштење: When not in use for extended periods, store the lift table in a dry, clean environment.
КСНУМКС. Решавање проблема
Погледајте табелу испод за уобичајене проблеме и њихова решења.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Lift does not move | No power, loose connection, remote battery dead, motor overload. | Check power adapter and wall outlet. Ensure all cables are securely connected. Replace remote battery. Reduce load if overloaded. |
| Lift moves slowly or with difficulty | Overload, insufficient power, lack of lubrication, obstruction. | Reduce load. Check power supply. Lubricate moving parts. Remove any obstructions. |
| Lift stops unexpectedly | Obstruction detection triggered, motor overheating, power interruption. | Remove obstruction. Allow motor to cool down. Check power connection. |
| Даљински управљач не ради | Dead battery, out of range, interference. | Replace battery (Model 23A). Move closer to the lift table. Reduce potential interference. |
| WiFi control not connecting | Incorrect pairing, WiFi signal issue, APP error. | Re-pair the device via the eWelink APP. Check WiFi signal strength. Restart the APP or your device. |
If the problem persists after attempting these solutions, please contact DIHOOL customer support.
10. Гаранција и подршка
DIHOOL products are designed for quality and durability. For warranty information and customer support, please refer to the 'Protection To Fix Card' included with your product or contact DIHOOL directly through their official channels. Please provide your purchase store, order number, name, contact information, and a detailed quality problem statement when seeking support.
Note: Maintenance is not provided for situations such as unauthorized disassembly, improper use, natural disasters, or force majeure events.