Увод
This manual provides essential instructions for the safe installation, operation, and maintenance of your EGLO Salvilanas Integrated LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The EGLO Salvilanas light features an integrated LED, a black finish, and a white diffuser, designed for indoor use in various rooms such as kitchens, dining rooms, bedrooms, and hallways. It can be mounted on ceilings or walls.
Безбедносне информације
- УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање на прекидачу или кутији са осигурачима пре инсталације или сервисирања.
- All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring, consult a qualified electrician.
- Do not install this fixture in wet locations. It is designed for indoor use only and is not water resistant.
- Уверите се да површина за монтажу може да издржи тежину уређаја.
- Do not attempt to modify the integrated LED components.
- Држите материјале за паковање даље од деце.
Садржај пакета
Пре почетка инсталације проверите да ли су све компоненте присутне:
- EGLO Salvilanas Integrated LED Ceiling Light fixture (1)
- White plastic diffuser (1)
- Mounting hardware kit (screws, wire nuts, etc.) (1 set)
- Упутство за употребу (1)
Подешавање и инсталација
This fixture is designed for semi-flush mount installation on ceilings or walls.
1. Припрема
- Turn off power at the main circuit breaker or fuse box.
- Carefully unpack the fixture and its components. Keep all parts organized.
- Identify the mounting location. Ensure it is a dry, indoor area and the electrical box is securely mounted.
2. Монтирање уређаја
Refer to the diagram below for general mounting steps. Specific hardware may vary.
Image: The EGLO Salvilanas Integrated LED Ceiling Light, demonstrating its sleek design suitable for ceiling or wall mounting.
- Attach the mounting bracket (if separate) to the electrical junction box using the provided screws.
- Повежите електричне жице:
- Connect the black wire from the fixture to the black (live) wire from the junction box.
- Спојите белу жицу из уређаја на белу (неутралну) жицу из разводне кутије.
- Connect the ground wire from the fixture to the ground wire from the junction box.
- Осигурајте све спојеве жичаним наврткама и електричном траком.
- Пажљиво увуците све жице у разводну кутију.
- Align the fixture with the mounting bracket and secure it using the provided screws or twist-lock mechanism.
- Install the white plastic diffuser onto the fixture according to its design (e.g., twist-lock, clips).
3. Завршни кораци
- Вратите напајање на прекидач.
- Тестирајте расветно тело.
Упутство за употребу
The EGLO Salvilanas LED Ceiling Light is designed for easy operation.
- Укључивање/искључивање: The light can be controlled via a wall switch connected to the fixture's power supply.
- Методе контроле: This fixture supports control via a remote control and a compatible app. Refer to the separate instructions provided with your remote control or app for pairing and advanced features.
- Светла боја: The integrated LED provides a warm white light.
Одржавање
To ensure the longevity and appearance of your EGLO Salvilanas LED Ceiling Light, follow these simple maintenance guidelines:
- Чишћење: Искључите струју пре чишћења. Користите меку, суву или благо длаку.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
- ЛЕД компоненте: The integrated LED light source is designed for long-term use and is not user-replaceable. Do not attempt to open or service the LED module.
- Diffuser Care: Handle the white plastic diffuser with care to avoid scratches or damage.
Решавање проблема
If you experience issues with your light fixture, try the following solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Светлост се не пали. | Нема струје за уређај. Слаба веза ожичења. Неисправан зидни прекидач. |
Проверите прекидач. Проверите да ли су сви жичани прикључци безбедни (са искљученим напајањем). Test wall switch or replace if necessary. |
| Светло трепери. | Лабаво ожичење. Некомпатибилни прекидач за пригушивање јачине светла (ако је применљиво). |
Проверите спојеве ожичења (са искљученим напајањем). Ensure any dimmer switch is LED-compatible. |
| Remote control/App not working. | Батерије су мртве. Није правилно упарено. Интерференција сигнала. |
Замените батерије даљинског управљача. Refer to remote/app instructions for pairing. Ensure no obstructions or strong interference sources. |
If these steps do not resolve the issue, contact customer support.
Спецификације
| Бренд: | ЕГЛО |
| Број модела: | 206019А |
| Извор светлости: | Интегрисана ЛЕД |
| Ватtage: | 21 вати |
| Осветљеност: | 2850 лумена |
| Ефикасност: | 135.71 лумена/ват |
| Светла боја: | Топла бела |
| Волtage: | 12 волти (ДЦ) |
| Материјал: | Alloy Steel, Metal (fixture), Plastic (shade) |
| завршити: | Black (fixture), White (diffuser) |
| Димензије (Д к Ш к В): | 30.32 cm x 8 cm x 1.5 cm |
| Тежина артикла: | 5 фунти |
| Тип инсталације: | Полу уградни носач |
| Метод контроле: | Апликација, даљинско управљање |
| Унутрашња/спољна употреба: | Индоор |
| Ниво водоотпорности: | Није водоотпоран |
Гаранција
This EGLO product is covered by a Двогодишња гаранција произвођача from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Подршка
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official EGLO website. When contacting support, please have your model number (206019A) and proof of purchase readily available.