HPBS H2500

HPBS 5000A Portable Car Jump Starter with Air Compressor

Модел: Х2500

Увод

The HPBS 5000A Portable Car Jump Starter with Air Compressor is a multi-functional device designed for automotive emergencies and maintenance. It combines a powerful jump starter, a tire inflator, a power bank, and an LED flashlight into one compact unit, providing essential tools for vehicle owners.

HPBS 5000A Portable Car Jump Starter with Air Compressor

Image: The HPBS 5000A Portable Car Jump Starter, showcasing its compact design and integrated components like the LCD display, control buttons, and jumper cable ports.

Шта је у кутији

Your HPBS Jump Starter package includes the following items:

  • HPBS Jump Starter (x1)
  • Smart Jumper Cables (x1)
  • USB Charging Cable (without adapter) (x1)
  • Trachea (air hose) (x1)
  • Gas Nozzles (x3)
  • EVA Storage Case (x1)
  • Упутство за употребу (к1)
Contents of the HPBS Jump Starter box

Image: All components included in the HPBS Jump Starter package, neatly arranged within and around its protective EVA storage case.

Кључне карактеристике

  • 5000A Peak Jump Starting Power: Capable of jump-starting 12V vehicles (up to 10.0L gas or 8.0L diesel engines) in 1-2 seconds, up to 35 times on a full charge.
  • Intelligent 150 PSI Tire Inflation: Features tire pressure monitoring, preset value stop, and unit switching (BAR/PSI/KPA). Inflates a 225/60 R18 car tire in approximately 8 minutes.
  • Powerful Mobile Power Bank: Equipped with USB outputs (5V/3A, 9V/2A, 12V/1.5A) and a Type-C input (5V/2A, 9V/2A) to charge various electronic devices.
  • ЛЦД екран: Provides clear real-time data including battery level, inflator mode, and tire pressure.
  • Multi-mode LED Flashlight: Includes flashlight, SOS, and strobe modes for illumination in dark or emergency situations.
  • Вишеструке сигурносне заштите: Incorporates 10 built-in safety technologies (over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, reverse-charge) with advanced intelligent clamps.

Сетуп

Before first use, ensure the jump starter is fully charged. Connect the provided USB charging cable to the Type-C input port on the device and a suitable USB power adapter (not included). The LCD display will indicate the charging status. Once fully charged, disconnect the cable.

HPBS Jump Starter being used as a power bank

Image: The HPBS Jump Starter connected via USB-C, demonstrating its power bank functionality for charging mobile devices.

Упутство за употребу

1. Паљење возила помоћу каблова

  1. Ensure the jump starter is sufficiently charged.
  2. Insert the smart jumper cable plug firmly into the jump starter's output port.
  3. Повежите црвена (+) clamp на позитивни (+) пол акумулатора вашег возила.
  4. Повежите црна (-) clamp на негативни (-) пол акумулатора вашег возила.
  5. Start your car's engine.
  6. Once the engine starts, immediately remove the jumper cables from the car battery, then disconnect the cables from the jump starter.
Steps to jump start a vehicle with HPBS Jump Starter

Image: A visual guide illustrating the three steps for jump-starting a vehicle: connecting the jump starter, attaching the clamps to the car battery, and starting the engine.

2. Надувавање гума

  1. Take out the air pipe (trachea) and connect it to the inflator interface on the jump starter. Tighten it securely.
  2. Притисните и држите дугме за напајање да бисте укључили машину.
  3. Connect the air pipe to the tire valve. The LCD display will show the current tire pressure.
  4. Short press the mode switch button to select the desired inflation mode (e.g., car, motorcycle, bicycle, ball).
  5. Use the "+" and "-" keys to adjust the preset air pressure value.
  6. Press the power/inflation start button to begin inflation. The device will automatically stop when the preset pressure is reached.
  7. During inflation, you can short press the power button or inflation mode button to stop inflation manually.
HPBS Jump Starter inflating a car tire

Image: The HPBS Jump Starter connected to a car tire, demonstrating its tire inflation capability with the digital display showing pressure readings.

3. Функција преносног пуњача

To use the device as a power bank, simply connect your electronic device (e.g., smartphone, tablet) to the USB output port using a compatible USB cable. The jump starter will automatically begin charging your device.

4. ЛЕД батерија

Press the lighting button to cycle through the flashlight modes: constant on, SOS signal, and strobe. Press again to turn off the light.

Одржавање

  • Store the jump starter in its EVA storage case in a cool, dry place when not in use.
  • Recharge the device every 3-6 months, even if not used, to maintain battery health.
  • Очистите спољашњост меком, сувом крпом. Не користите јаке хемикалије или абразивна средства за чишћење.
  • Inspect jumper cables and air hose for any damage before each use.

Решавање проблема

ПроблемМогући узрокРешење
Уређај се не укључује.Батерија је празна.Потпуно напуните стартер.
Возило се не пали помоћу каблова.Incorrect cable connection; battery too low; engine size exceeds capacity.Ensure correct polarity (+ to +, - to -). Check jump starter battery level. Verify vehicle engine size is within specified limits (10.0L gas / 8.0L diesel).
Tire inflator not working or inaccurate reading.Air hose not securely connected; valve stem issue.Ensure air hose is tightly screwed onto both the device and the tire valve. Check tire valve for damage.
Уређај се прегрева.Prolonged use or high ambient temperature.Allow the device to cool down before further use. Avoid direct sunlight during operation.

Спецификације

ФеатуреДетаљ
БрандХПБС
МоделХ2500
Вршна излазна струја5000 Amps
Компатибилност мотораДо 10.0 литара бензина, 8.0 литара дизела
Притисак у напумпавању гума150 PSI (макс.)
Power Bank Input (Type-C)5В/2А, 9В/2А
Power Bank Output (USB)5V/3A, 9V/2A, 12V/1.5A
Димензије (Д к Ш к В)8.07 cm x 3.54 cm x 1.57 cm
Тежина артикла1.4 фунти
Тип батеријеЛитијум полимер (укључен)
Diagram of HPBS Jump Starter features and ports

Image: A detailed diagram highlighting the various ports and controls on the HPBS Jump Starter, including the LED lighting, USB output, Type-C input, inflator interface, and display screen.

Гаранција и подршка

HPBS stands behind the quality of its products. This jump starter comes with a Двогодишња гаранција квалитета производа. For any questions or assistance, please do not hesitate to contact HPBS customer service, available 7 дана у недељи, 24 сата дневно.

Contact information can typically be found in the included user manual or on the official HPBS webсајту.

© 2023 HPBS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.