Упутство за употребу

1. Увод

This manual provides detailed instructions for the setup, operation, and maintenance of your Waytronic Infrared Motion Sensor Activated Sound Speaker. This device is designed to detect motion and play a pre-recorded or custom voice message, serving various purposes such as greeting visitors, providing security alerts, or acting as a reminder.

2. Карактеристике производа

The Waytronic Infrared Motion Sensor Activated Sound Speaker offers the following key functionalities:

• Customizable Voice Recording: Equipped with a built-in microphone, allowing users to record and customize their own voice messages. Recording is initiated by pressing a button.
• Extended Recording Capacity: Supports recording up to 130 seconds, with the ability to segment recordings.
• Детекција покрета широког спектра: Features a detection range with a 120-degree horizontal and 60-degree vertical angle.
• Подесива јачина звука: Provides two distinct volume levels for clear audio output.
• Флексибилне опције напајања: Can be powered by three AAA dry batteries or a DC5V USB power supply.
• Easy Re-recording: Messages can be re-recorded as many times as needed, simply by pressing a button.

3. Садржај пакета

Молимо вас да проверите да ли су све ставке присутне у пакету:

• Infrared Motion Sensor Activated Sound Speaker (Black)
• Монтажни завртњи
• Ball Mounting Accessories
• Кориснички приручник (овај документ)

4. Производ је готовview

Слика 4.1: Предња и бочна view of the Waytronic Infrared Motion Sensor Activated Sound Speaker. The front features the PIR sensor and speaker grille, while the side shows the mounting bracket.

Слика 4.2: Детаљан предњи део view of the speaker with key components labeled: PIR Sensor, Volume/ON/OFF switch, Button A (Record), Button B (Play/Stop), and the built-in speaker/microphone. The ball mounting accessory is also shown.

Слика 4.3: Позади view of the speaker showing the Screw Mounting Hole, Bracket Mounting points, and the Battery Case for three AAA batteries.

Слика 4.4: Сиде view illustrating the USB port for power supply (DC5V) and the 360-degree rotatable mounting bracket.

5. Инсталација

1. Напајање:
   • Insert three AAA batteries into the battery case located on the back of the device (refer to Figure 4.3). Ensure correct polarity.
   • Alternatively, power the device using a DC5V USB cable connected to the USB port on the side (refer to Figure 4.4).
2. Локација монтаже:
   • Choose an indoor location such as a front door, corridor, or shop entrance.
   • For optimal performance and to prevent false triggers, avoid areas with direct sunlight, significant temperature variations, or proximity to air conditioners and heaters.
3. Монтажа уређаја:
   • Use the provided mounting screws and ball mounting accessories to secure the speaker to a wall or surface. The ball mounting allows for 360-degree rotation to adjust the detection angle.
   • Ensure the PIR sensor (Figure 4.2) faces the area where motion detection is desired.

6. Операција

6.1. Recording a Message

1. Ensure the device is powered on using the Volume/ON/OFF switch (Figure 4.2).
2. Притисните и држите Button A (Record). The indicator light may change to confirm recording mode.
3. Speak clearly into the built-in microphone (located near the speaker grille, Figure 4.2). The maximum recording time is 130 seconds.
4. Релеасе Дугме А to stop recording. A successful recording typically requires more than 3 seconds of audio.
5. To re-record, simply repeat the process. The new recording will overwrite the previous one.

6.2. Playing a Message

1. After recording, the device is ready to play the message upon motion detection.
2. To manually play the current message, press Button B (Play/Stop). Press again to stop playback.

6.3. Подешавање јачине звука

Користите Volume/ON/OFF switch (Figure 4.2) to select between two volume levels. Slide the switch to the desired position.

6.4. Детекција покрета

Once powered on and a message is recorded, the device will automatically play the message when motion is detected within its 120-degree horizontal and 60-degree vertical detection range.

Слика 6.1: This diagram illustrates that audio files are changed via button recording, not through USB data cable or TF card.

7. Пријаве

The Waytronic Motion Sensor Speaker can be utilized in various scenarios:

• Greeting Visitors: Place at an entrance to play a welcoming message.
• Security Reminder: Record a warning message to deter intruders or remind individuals of security protocols.
• Daily Audio Reminders: Use for personal reminders in homes or offices.
• Sale Advertising: Play promotional messages in retail environments.
• Animal Deterrent: Record sounds to discourage animals from entering certain areas.
• Event Enhancement: Integrate into festive displays or haunted house setups for interactive sound effects.

Слика 7.1: Examples of applications including entrance door greeting, celebrating festivals, and home daily reminders.

Слика 7.2: The speaker used to greet visitors upon entry.

Слика 7.3: The speaker playing a security message to an approaching individual.

Слика 7.4: The speaker used to deter animals, such as a lemur, with an audible message.

КСНУМКС. Решавање проблема

9. Спецификације

10. Безбедносне информације

• Не излажите уређај екстремним температурама, директној сунчевој светлости или високој влажности.
• Држите уређај даље од воде и других течности.
• Не покушавајте сами да отворите или поправите уређај. За сервис се обратите квалификованом особљу.
• Dispose of batteries according to local regulations. Do not mix old and new batteries or different types of batteries.
• Keep out of reach of children to prevent accidental ingestion of small parts or batteries.

11. Корисничка подршка

If you have any questions or encounter issues with your Waytronic Infrared Motion Sensor Activated Sound Speaker, please contact our customer support team. We are committed to assisting you within 24 hours.

За подршку, посетите Waytronic Store on Amazon или погледајте контакт информације које сте добили уз куповину.