Otcboimo TYWB1CH-D1 Zigbee 1CH Smart Switch Module User Manual

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of the Otcboimo TYWB1CH-D1 Zigbee 1CH Smart Switch Module. This device is designed to integrate various electrical appliances and access control systems into your smart home network using Zigbee 3.0 technology. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Безбедносне информације

• Ensure the power supply is disconnected before any installation or wiring.
• Инсталацију треба да изврши квалификовани електричар или стручна особа.
• Не излажите уређај влази или екстремним температурама.
• Проверите тачан обимtage and current ratings before connecting to any appliance.
• The relays are dry contact outputs; ensure proper isolation from the power supply input.

3. Производ је готовview

The Otcboimo TYWB1CH-D1 is a single-channel Zigbee 3.0 smart relay switch designed for versatile control of various electrical devices. It features potential-free (dry contact) outputs, allowing it to control a wide range of applications such as garage doors, sliding gates, and access control systems.

Кључне карактеристике:

• Zigbee 3.0 повезивање: Compatible with various Zigbee hubs including Tuya, eWeLink, Philips Hue, and Samsung SmartThings. Direct connection to certain Amazon Echo devices (Echo Plus, Echo Show 2nd Gen) is also supported.
• Излаз сувог контакта: Provides flexible voltage support for diverse applications.
• Вишеструки режими рада: Supports Inching (Momentary) and Self-locking modes.
• даљински управљач: Manage connected devices via Tuya/Smart Life app (with Tuya hub) or eWeLink app (with eWeLink hub).
• Контрола гласом: Integrates with Amazon Alexa and Google Assistant (requires Zigbee hub).
• RF433MHz Control: Supports pairing with RF433MHz remote controllers.
• Home Assistant/Zigbee2MQTT Integration: Enables local control.

Компоненте:

The device includes input terminals for power, output terminals for dry contact control, and buttons for manual operation and pairing.

Figure 1: Otcboimo TYWB1CH-D1 Zigbee Smart Switch Module. This image displays the top view of the white smart switch module, showing the Otcboimo brand name, model number TYWB1CH-D1, input voltage range (AC/DC 7-32V), max current (10A), wireless type (Zigbee), and radio frequency (433Mhz). It also shows the NO, COM, NC terminals and the AC/DC 7-32V input terminals.

Figure 2: Otcboimo TYWB1CH-D1 Dimensions and Ports. This image provides a side view of the smart switch module with dimensions labeled: 30mm (1.18 inches) height, 73mm (2.87 inches) length, and 46mm (1.81 inches) width. It highlights the NO, COM, NC terminals, USB 5V input, AC/DC 7-32V input, manual switch, and mode switch.

4. Спецификације

5. Подешавање и инсталација

Before proceeding, ensure all power is disconnected from the circuit you intend to modify.

5.1 Hub Compatibility and Connection

The Otcboimo TYWB1CH-D1 module requires a Zigbee hub for most smart home integrations. Some Amazon Echo devices can connect directly.

• Директна веза: Connects directly to Amazon Echo Plus (Model: ZE39KL), Echo Show (2nd Gen) (Model: DW84JL), and Echo Plus (2nd Gen) (Model: L9D29R) without an additional Zigbee hub.
• Zigbee Hub Required: Compatible with Tuya Zigbee hub (recommended for best compatibility), eWeLink Zigbee hub, Samsung SmartThings hub, Philips Hue hub, Sonoff Zigbee Bridge, and Zigbee HA Hub.

Figure 3: Zigbee Hub Compatibility. This diagram illustrates the various Zigbee hubs and devices compatible with the smart switch module, including Amazon Echo devices, SmartThings Hub, eWeLink Hub, Tuya Zigbee Hub, and Zigbee2mqtt.

To pair with a Zigbee hub, follow the specific pairing instructions for your hub and then initiate pairing on the Otcboimo module (usually by pressing a pairing button for a few seconds until an indicator light flashes).

5.2 Дијаграми ожичења

The module supports two main working modes: Inching (Momentary) and Self-locking. The wiring configuration depends on the desired application.

5.2.1 Wiring for Access Control (Inching Mode)

This configuration is suitable for applications like gate openers or garage doors where a momentary pulse is required to trigger an action.

Figure 4: Wiring for Access Control (Inching Mode). This diagram shows how to connect the smart switch module to an access control system. The module's COM and NO terminals are connected to the button input of the access control system, which is powered by AC 85-250V. The module itself receives input power from AC 85-250V.

5.2.2 Wiring for Inching Mode with Remote Control

This diagram illustrates how to connect the module to a remote control for momentary operation.

Figure 5: Wiring for Inching Mode with Remote Control. This image shows the smart switch module connected to a remote control board. The module's COM and NO terminals are wired to specific pins on the remote control board. The module receives input power from AC 85-250V.

5.2.3 Wiring for Self-locking Mode

Self-locking mode functions like a traditional on/off switch, maintaining its state until toggled again. This is suitable for controlling lights or other appliances that require continuous power.

Figure 6: Wiring for Self-locking Mode. This diagram presents two self-locking wiring examples. Both show the module receiving AC 85-250V input. In 'self-locking 1', the COM and NO terminals are connected to a light bulb circuit. In 'self-locking 2', the COM and NC terminals are connected to a light bulb circuit. The note emphasizes that it is a dry contact switch, providing only a pulse signal, and requires an external power supply for the output side.

Важна напомена: The module provides dry contact output (passive output). It does not output electricity directly. An external power supply is required for the appliance connected to the output terminals (NC, NO, COM).

6. Упутство за употребу

6.1 Радни режими

• Inching Mode (Momentary): When activated, the channel turns on and automatically closes after a set duration. The default inching time is 0.5 seconds. This duration can be adjusted within the range of 1-3600 seconds only when using a Tuya hub. Other hubs may not support this adjustment.
• Режим самозакључавања: Functions like a standard toggle switch. Press once to turn on and keep it on; press again to turn off and keep it off.

The working mode can typically be switched via the mode switch button on the device or through the connected smart home app, depending on the hub used.

6.2 Даљинско управљање апликацијом

Once paired with a compatible Zigbee hub (e.g., Tuya, eWeLink), you can control the module remotely using the respective mobile application (Tuya/Smart Life app for Tuya hub, eWeLink app for eWeLink hub). This allows you to turn connected appliances on/off from anywhere.

6.3 Управљање гласом

With a connected Zigbee hub, the module can be integrated with voice assistants like Amazon Alexa and Google Assistant. This enables hands-free control of your devices.

Figure 7: Voice Control Integration. This image depicts a user interacting with a smart speaker, demonstrating voice control functionality with Amazon Alexa and Google Assistant. The text shows an example command: "Hi Alexa, turn on the light." and the response: "Okay."

To enable voice control, link your smart home app (e.g., Tuya Smart, Smart Life) with your Alexa or Google Home account and discover new devices.

6.4 RF433MHz Control

The module supports pairing with RF433MHz remote controllers for local control.

1. Упаривање: Press the RF433 pairing button on the device for 3 seconds. Wait until the blue LED indicator turns on. Then, press any button on your RF433MHz remote controller. The device should successfully pair.
2. Брисање упаривања: To clear all paired RF433MHz remotes, press the RF433 pairing button for 8 seconds. Wait until the blue LED indicator turns off. This action will clear all stored RF pairings.

7. Одржавање

The Otcboimo TYWB1CH-D1 Smart Switch Module requires minimal maintenance. Keep the device clean and free from dust. Do not use harsh chemicals for cleaning. Ensure it is installed in a dry environment, away from direct sunlight and extreme temperatures, to prolong its lifespan.

КСНУМКС. Решавање проблема

• Уређај не реагује:
  • Check if the power supply to the module is stable and within the specified voltage range (USB 5V or DC/AC 7V-32V).
  • Ensure the Zigbee hub is powered on and connected to your network.
  • Verify that the module is successfully paired with your Zigbee hub. Try re-pairing if necessary.
  • Check the distance between the module and the Zigbee hub; ensure it's within range.
• Проблеми са контролом апликације:
  • Уверите се да ваш паметни телефон има активну интернет везу.
  • Ensure the correct app (Tuya/Smart Life or eWeLink) is being used and is up to date.
  • Одјавите се и поново се пријавите у апликацију.
• Гласовна контрола не ради:
  • Verify that your Zigbee hub is linked to your Alexa or Google Home account.
  • Ensure the device is discovered and named appropriately in your voice assistant app.
  • Speak commands clearly and within range of your voice assistant device.
• RF433MHz Remote Not Working:
  • Уверите се да даљински управљач има исправне батерије.
  • Re-attempt the RF433MHz pairing process as described in Section 6.4.

9. Гаранција и подршка

For warranty information and technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt for warranty claims.