TOPXCDZ H807SB 4-Port DMX/Artnet to SPI LED Pixel Controller User Manual

1. Увод

The TOPXCDZ H807SB is a versatile LED pixel controller featuring WIFI and Bluetooth remote control capabilities. This V3 version supports four output ports, capable of controlling up to 4096 pixels. It operates with a DC5-24V input voltage and offers control via Android mobile applications, web pages across various operating systems, and wireless synchronization for multiple controllers. It also supports wireless control from a DMA console.

The H807SB facilitates communication distances of over 60 meters (unobstructed) between controllers or between a controller and a mobile phone. Bluetooth remote control communication is effective over 30 meters (unobstructed). This controller is compatible with a wide range of LED driver chips, including DMX512, HDMX, MY9941, UCS1903, UCS1909, UCS1912, WS2811, WS2812, WS2813, TM1809, TM1812, TM1913, TM1926, P943, P9883, SM16703, SM16709, and SM16712. For optimal performance, the control effect and timing for specific driver chips should be verified through actual testing. The recommended software for programming is "LED Programming Software" V5.03 or newer. Please note that the Bluetooth remote control is an optional accessory and must be purchased separately.

2. Производ је готовview

The H807SB controller is designed for advanced LED pixel control, offering robust features for various lighting applications.

Кључне карактеристике:

• Четири излазна порта: Controls up to 4096 pixels.
• Подршка за СД картицу: Compatible with FAT32 and FAT16 formats, supporting up to 64 DAT files.
• Контрола мобилних апликација: Use your phone to switch files, adjust speed and brightness, and configure unicast or full playback settings.
• ВИФИ повезивање: Supports various WIFI working modes and WEB control. Enables multiple controllers to synchronize wirelessly.
• DMA Console Integration: Connects to DMA consoles via WIFI, supports RGBW, allows file replacement, and speed/brightness adjustments with fast response times.
• Pixel Tracing and Counting: Supports online point tracing and offline point counting.
• ДАТ File Менаџмент: Receive and save DAT files to the SD card via WIFI.
• Надоградње фирмвера: Supports firmware updates for enhanced functionality.
• Блутут даљински управљач: Compatible with Bluetooth remote control (sold separately).

Садржај пакета:

• H807SB 4-Port DMX/Artnet to SPI LED Pixel Controller
• СД картица
• Note: Remote Control is an optional accessory and may not be included.

3. Подешавање

3.1 Идентификација компоненте

Слика 1: Врх view of the H807SB controller, showing power input, output ports (DAT/D, GND), and control buttons (OK, MENU).

Слика 2: Сиде view of the H807SB controller, highlighting the SD card slot.

3.2 Прикључак за напајање

1. Ensure the power supply is within the DC5-24V range.
2. Connect the positive (+) terminal of your power supply to the "POWER 5-24V" input on the controller.
3. Connect the negative (-) terminal (GND) of your power supply to the "POWER GND" input on the controller.
4. Проверите да ли су све везе безбедне пре него што примените напајање.

3.3 Повезивање ЛЕД траке

The H807SB features four output ports for connecting LED pixel strips.

1. Identify the Data (DAT/D) and Ground (GND) wires on your LED pixel strip.
2. Connect the Data wire of your LED strip to the "DAT/D" terminal of an available output port (Port 1, 2, 3, or 4) on the controller.
3. Connect the Ground wire of your LED strip to the "GND" terminal of the same output port.
4. Repeat for additional LED strips, utilizing the remaining ports as needed.
5. Ensure the LED strip's voltage matches the controller's output voltage (which is determined by the input power supply).

3.4 Уметање SD картице

1. Format your SD card to FAT32 or FAT16 file система.
2. Load your desired DAT files (up to 64) onto the formatted SD card.
3. Locate the SD card slot on the side of the H807SB controller (refer to Figure 2).
4. Insert the SD card into the slot until it clicks into place.

3.5 Инсталација софтвера и повезивање

1. Download and install "LED Programming Software" V5.03 or above on your computer.
2. For mobile control, download the corresponding application for Android devices.
3. Power on the H807SB controller.
4. Connect to the controller's WIFI network from your device (phone or computer). The default network name and password should be provided with the product or in the software documentation.
5. Alternatively, if using a Bluetooth remote control (purchased separately), ensure it is paired according to its instructions.

4. Упутство за употребу

4.1 Basic Operation via Controller Buttons

The controller features an LED display and buttons for basic navigation and selection.

• Дугме МЕНУ: Press to cycle through different settings or modes.
• Дугме ОК: Притисните да потврдите избор или уђете у мени.
• Дугмад за горе/доле: Use to adjust values or navigate through options.

4.2 Mobile App and Web Контрола странице

Once connected via WIFI, you can control the H807SB using the dedicated mobile app or a web претраживач.

1. Open the mobile app or navigate to the controller's web интерфејс у ​​вашем претраживачу.
2. File Избор: Browse and select DAT files stored on the SD card for playback.
3. Подешавања: Use the interface to modify playback speed, brightness, and color settings.
4. Режими репродукције: Configure unicast or full playback settings as required for your LED setup.
5. WIFI Working Mode: Set the controller's WIFI mode (e.g., AP mode for direct connection, STA mode for connecting to an existing network).

4.3 Напредне функције

• Wireless Synchronization: Multiple H807SB controllers can be synchronized wirelessly for large-scale installations. Refer to the software manual for detailed synchronization procedures.
• DMA Console Control: Connect the controller to a DMA console via WIFI to manage RGBW settings, replace files, and adjust parameters.
• Online Point Tracing: Utilize the software for real-time tracing of pixel points.
• Offline Point Counting: Perform offline counting of pixel points for project planning.
• ДАТ File Трансфер: Transfer and save DAT files to the controller's SD card wirelessly via WIFI.

4.4 Bluetooth Remote Control (Optional)

If you have purchased the Bluetooth remote control, follow its specific pairing instructions. The remote typically allows for basic functions such as power on/off, mode switching, and brightness adjustment.

5. Одржавање

• Чишћење: Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning. Avoid using liquids or abrasive cleaners.
• Окружење: Operate the controller in a dry, well-ventilated environment. Avoid extreme temperatures and high humidity. This product is designed for indoor use.
• Управљање СД картицама: Regularly back up your DAT files from the SD card. Periodically check the SD card for errors and reformat if necessary.
• Ажурирања фирмвера: Проверите произвођача website periodically for new firmware versions. Follow the provided instructions carefully for firmware upgrades to ensure optimal performance and access to new features.
• Кабловске везе: Periodically inspect all power and data cable connections for wear or damage. Ensure they are securely fastened.

КСНУМКС. Решавање проблема

Уобичајени проблеми и решења:

• Контролер се не укључује:
  • Check power supply connections and ensure the input voltagе је унутар ДЦ5-24В.
  • Проверите да ли адаптер за напајање исправно функционише.
• LED strips are not lighting up or displaying incorrect patterns:
  • Ensure DAT/D and GND connections to the LED strips are correct and secure.
  • Verify the LED driver chip type selected in the software matches your LED strips.
  • Check if the correct DAT file is loaded and playing.
  • Confirm the number of pixels set in the software matches your physical LED strip length.
  • Ensure the LED strip itself is functional.
• Cannot connect to controller via WIFI/App:
  • Ensure the controller is powered on and its WIFI is active.
  • Check your device's WIFI settings and confirm it's connected to the controller's network.
  • Поново покрените и контролер и уређај.
  • Verify the mobile app or web interface is up-to-date.
• SD card not recognized or DAT fileне игра:
  • Ensure the SD card is properly inserted into the slot.
  • Verify the SD card is formatted to FAT32 or FAT16.
  • Check that the DAT files are correctly placed on the SD card and are not corrupted.
  • Try using a different SD card to rule out card issues.
• Bluetooth remote control not working:
  • Уверите се да даљински управљач има свеже батерије.
  • Confirm the remote is properly paired with the controller.
  • Check the communication distance; ensure it's within 30 meters (unobstructed).
• Difficulty finding software or documentation:
  • Refer to the product listing or manufacturer's official website for the latest software downloads and support resources.
  • Тражи "LED Programming Software" V5.03 or newer.

7. Спецификације

8. Гаранција и подршка

For specific warranty information, please refer to the terms provided at the time of purchase or contact your retailer. If you encounter any issues not covered in this manual or require further assistance, please reach out to TOPXCDZ customer support through their official channels or the platform where the product was purchased.