Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw User Manual

1. Увод

The Total TGSLI201286 900W Lithium-Ion Chain Saw is a powerful and efficient tool designed for various cutting tasks. This cordless chain saw features a brushless motor, a 12-inch chain bar, and is powered by two 20V 4.0Ah lithium-ion batteries. It includes a quick charger for convenience. Key safety features such as a quick brake function and automatic lubrication are integrated to enhance user protection and tool longevity. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your chain saw.

Слика 1: Завршеноview of the Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw.

2. Безбедносна упутства

Увек се придржавајте основних мера предострожности како бисте смањили ризик од пожара, струјног удара и повреда приликом рада са електричним алатима. Прочитајте и разумејте сва упутства пре употребе.

• Лична заштитна опрема (ЛЗО): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. A hard hat and leg protection are also recommended.
• Безбедност на радном месту: Keep the work area clean and well-lit. Do not operate the chain saw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• електрична безбедност: Избегавајте контакт тела са уземљеним површинама. Не излажите електричне алате киши или влажним условима.
• Chain Saw Grip: Always hold the chain saw firmly with both hands when operating. Ensure a secure grip on both the front handle and the rear handle.
• Спречавање повратног удара: Be aware of the risk of kickback. Avoid the guide bar tip contacting any object. Use caution when re-entering a cut.
• Безбедност батерије: Use only the specified battery packs and charger. Do not short-circuit, disassemble, or expose batteries to high temperatures or fire.
• Одржавање: Disconnect the battery pack before making any adjustments, changing accessories, or storing the chain saw.
• Деца и посматрачи: Држите децу и пролазнике на безбедној удаљености од радног подручја.

3. Компоненте и карактеристике

The Total TGSLI201286 chain saw is equipped with several features designed for performance and safety.

• Мотор без четкица: Provides improved performance, efficiency, and extended tool life compared to brushed motors.
• 12-Inch Chain Bar and Chain: A robust cutting system suitable for various tree maintenance and wood cutting tasks.
• Литијум-јонске батерије од 20V и 4.0Ah (x2): Two high-capacity batteries provide extended runtime and consistent power.
• Брзи пуњач: Designed to rapidly charge the lithium-ion batteries, minimizing downtime.
• Quick Brake Function: Enhances safety by rapidly stopping the chain in the event of kickback or when the trigger is released.
• Automatic Lubrication System: Ensures continuous lubrication of the chain and guide bar during operation, reducing wear and friction.
• Ергономски дизајн: Features comfortable handles for improved control and reduced operator fatigue.

4. Подешавање

4.1 Пуњење батерија

Before first use, fully charge both 20V 4.0Ah lithium-ion batteries using the provided quick charger.

1. Уметните батерију у пуњач. Уверите се да је кликнула на своје место.
2. Plug the charger into a standard 220-240V/50/60Hz power outlet.
3. Индикаторска лампица пуњача ће приказивати статус пуњења. Погледајте упутство за пуњач за специфичне обрасце светла.
4. Када се батерија потпуно напуни, извадите је из пуњача.

Figure 2: The 20V 4.0Ah Lithium-Ion batteries and quick charger included with the chain saw.

4.2 Инсталирање водилице и ланца

Ensure the battery is removed before performing any assembly.

1. Скините поклопац ланца тако што ћете отпустити причврсне навртке.
2. Place the chain around the drive sprocket and then guide it into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the chain or guide bar).
3. Поставите клинове водилице кроз рупе у водилици.
4. Вратите поклопац ланца и ручно затегните навртке. Још увек немојте потпуно затегнути.

Слика 3: Крупни план view of the 12-inch guide bar and chain assembly.

4.3 Подешавање затегнутости ланца

Correct chain tension is crucial for safe and efficient operation.

1. With the chain cover retaining nuts slightly loose, use the chain tensioning screw (often a red dial or screw on the side) to adjust the chain tension.
2. The chain should be snug against the guide bar, but still able to be pulled freely by hand. There should be no sag on the underside of the guide bar.
3. Once the tension is correct, fully tighten the chain cover retaining nuts.

Figure 4: Detail of the chain tension adjustment mechanism on the chain saw.

4.4 Пуњење резервоара за уље за ланац

The automatic lubrication system requires chain oil for proper function.

1. Locate the oil filler cap on the chain saw body.
2. Unscrew the cap and fill the reservoir with appropriate chain and bar oil. Do not use motor oil or waste oil.
3. Вратите поклопац сигурно.

5. Упутство за употребу

5.1 Контролна листа пре операције

• Уверите се да је сва заштитна опрема ношена.
• Проверите затегнутост ланца.
• Verify chain oil reservoir is full.
• Проверите ланац да ли је оштар и да ли је оштећен.
• Уверите се да је радно подручје без препрека и пролазника.
• Insert a fully charged battery pack into the chain saw.

5.2 Покретање моторне тестере

1. Чврсто држите моторну тестеру обема рукама.
2. Engage the safety lock-off button (if present).
3. Press the trigger switch to start the motor. The chain will begin to move.

5.3 Cutting Techniques (Basic)

• Одржавање равнотеже: Always stand with a firm footing and maintain good balance.
• Одобрење: Ensure the area around the cutting path is clear.
• Угао сечења: Approach the material at an appropriate angle, allowing the chain to do the work. Do not force the saw.
• Избегавајте повратни ударац: Be extremely cautious of the guide bar tip. Never cut with the tip of the guide bar.
• Удове: When limbing, work from the bottom up to avoid pinching the guide bar.

5.4 Заустављање моторне тестере

Release the trigger switch. The quick brake function will rapidly stop the chain. For extended breaks or when moving between work areas, remove the battery pack.

6. Одржавање

Regular maintenance ensures the longevity and safe operation of your chain saw. Always remove the battery pack before performing any maintenance.

6.1 Cleaning the Chain Saw

• After each use, clean sawdust, chips, and debris from the chain saw body, guide bar, and chain.
• Use a brush or compressed air. Avoid using water directly on electrical components.

6.2 Оштрење ланца

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull or damaged. Refer to the chain manufacturer's instructions for proper sharpening techniques and file величине.

6.3 Одржавање водилице

• Clean the guide bar groove to remove sawdust and debris.
• Повремено окрећите вођицу како бисте осигурали равномерно хабање.
• Check the guide bar for burrs or damage. File down any burrs.

6.4 Нега и складиштење батерије

• Чувајте батерије на хладном и сувом месту даље од директне сунчеве светлости и екстремних температура.
• Do not store fully discharged batteries for extended periods. Charge them periodically.
• Remove batteries from the chain saw when not in use.

6.5 Chain Oil Management

Regularly check the chain oil level and refill as needed. Use only recommended chain and bar oil.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your chain saw.

8. Спецификације

Technical specifications for the Total TGSLI201286 900W Lithium-Ion Chain Saw.

9. Гаранција и подршка

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact Total Inc. customer service through their official webсајт или контакт податке наведене у паковању вашег производа.