Ансманн 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Увод

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

Укључено у кутију:

  • ANSMANN BC 6-12V/2A Smart Charger Unit
  • Батерија Цлampс (крокодил штипаљке)
  • Прстенасти терминали
  • Упутство за употребу

2. Подешавање и повезивање

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Кораци повезивања:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Уверите се да су све везе безбедне.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

Слика 2: Прample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

Слика 3: Прample of connecting the charger to a motorcycle battery.

3. Упутство за употребу

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

Притисните тастер МОДЕ button to cycle through the available charging programs:

  • 6В СТД: For 6V lead-acid and lead-gel batteries.
  • 12В СТД: For 12V lead-acid and lead-gel batteries.
  • 12В ЛФП: For 12V Lithium Iron Phosphate (LiFePO4) batteries.

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Сtage Automatic Charging Process:

The charger automatically progresses through the following stages to optimize battery charging and maintenance:

  1. Провера батерије: Assesses the battery's initial status and voltage.
  2. Desulfation: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. Анализа: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. Волtagе Контрола: Monitors the battery's charge status to ensure optimal voltagе нивоа.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Дијаграм који илуструје 8-еtage charging process of the ANSMANN charger

Слика 4: Визуелни приказ система 8-stagаутоматски процес пуњења.

4. Одржавање

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Сигурносне карактеристике:

  • Заштита од обрнутог поларитета: Prevents damage if the battery connections are reversed.
  • Заштита од преоптерећења: Protects against excessive current draw.
  • Заштита од дубоког пражњења: Prevents charging of severely discharged batteries that may be damaged.
  • Заштита од кратког споја: Automatically shuts off if a short circuit is detected.
  • Spark Protection: Minimizes the risk of sparks during connection.
  • Splash Water Protection (IP65): Ensures safe operation in damp условима.
  • Defect Detection: Identifies potentially faulty batteries.
ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Уобичајени проблеми и решења:

  • Пуњач се не укључује: Ensure the charger is securely plugged into a working power outlet. Check for any visible damage to the power cord.
  • Пуњење не почиње: Verify that the battery connections are correct (positive to positive, negative to negative). Ensure the battery voltage matches the selected charging program (6V or 12V). The battery might be too deeply discharged or defective, triggering protection.
  • Error indicator on display: Refer to the specific error codes in the full manual (if provided) or disconnect and reconnect the charger and battery to reset. If the error persists, the battery may be faulty.

6. Спецификације

ФеатуреСпецификација
Број модела1001-0143
Улазни волtageАЦ 100-240В, 50/60Хз
Оутпут Волtage6V / 12V (једносмерна струја)
Цхаргинг Цуррент1A / 2A (selectable)
Капацитет батерије4 Ah - 60 Ah
Типови батеријаLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Пуњење Сtages8-Сtagе Аутоматски
Оцена заштитеIP65 (Dust and Splash Water Protected)
Димензије производа7.09 к 3.11 к 1.93 инча (180 к 79 к 49 мм)
Тежина артикла1.03 фунте (0.47 кг)

7. Гаранција

The ANSMANN BC 6-12V/2A Smart Charger comes with a Двогодишња гаранција произвођача from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Подршка

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN webсајту или преко вашег продавца.

For more information about ANSMANN products, visit the Ansmann Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.