Упутство за употребу Keychron K10 Pro QMK/VIA прилагођене бежичне механичке тастатуре

Производ је завршенview

The Keychron K10 Pro is a full-size (100% layout) custom wireless mechanical keyboard designed for versatility and performance. It features QMK/VIA support for extensive key remapping, dual wireless (Bluetooth 5.1) and wired (USB-C) connectivity, and a durable construction with pre-lubricated Keychron K Pro switches. This manual provides essential information for setting up, operating, and maintaining your K10 Pro keyboard.

Image: The Keychron K10 Pro keyboard, showcasing its full-size layout and design.

Кључне карактеристике:

• QMK/VIA Support: Fully programmable keys for custom layouts, macros, and shortcuts.
• Двоструко повезивање: Seamless switching between Bluetooth 5.1 (up to 3 devices) and USB-C wired mode.
• Pre-lubed Keychron K Pro Switches: Ensures a smooth and consistent typing experience.
• Побољшано искуство куцања: Features sound-absorbing foam, a silicone bottom pad, and a steel plate for improved acoustics and feel.
• Бело позадинско осветљење: Offers 14 types of white backlight effects.
• Ергономски дизајн: Three levels of adjustable typing angles (5°, 9.2°, and 12°).
• Издржљиве капице за тастере: Double-shot PBT keycaps for longevity and resistance to shine.

Водич за подешавање

Садржај пакета:

Пре него што почнете, уверите се да су све компоненте присутне:

• 1 Keychron K10 Pro Mechanical Keyboard
• 1 ABS Case
• 1 Hot-swap PCB
• 1 Steel Plate
• 1 Sound Absorbing Foam
• 1 Silicone Bottom Pad
• 7 Sets 2U Screw-In Stabilizers
• 1 Set 6.25U Screw-In Stabilizers
• 1 Кабл типа-А до типа-Ц

Прво пуњење:

Connect the keyboard to a power source using the provided USB-C cable. The battery indicator will show charging status. A full charge can last up to 100 hours with the lowest backlight brightness.

Image: The Keychron K10 Pro keyboard highlighting its 4000mAh battery capacity.

Пребацивање оперативног система:

Locate the OS switch on the side of the keyboard. Slide it to the appropriate position for your operating system (macOS or Windows/Linux). This ensures correct key mapping for your system.

Image: Close-up of the keyboard's side switch for macOS and Windows/Linux compatibility.

Режими повезивања:

The K10 Pro supports both wireless Bluetooth and wired USB-C connections.

• Блуетоотх режим: Slide the mode switch to 'BT'. Press and hold 'Fn + 1' (or 'Fn + 2'/'Fn + 3') for 4 seconds to enter pairing mode. The key will flash rapidly. Тражи 'Keychron K10 Pro' on your device and connect.
• Жични режим: Slide the mode switch to 'Cable'. Connect the USB-C cable from the keyboard to your computer. The keyboard will automatically switch to wired mode.

Image: The Keychron K10 Pro keyboard shown with both Mac and Windows operating systems, indicating broad compatibility.

Упутство за употребу

Key Remapping with QMK/VIA:

The K10 Pro is fully programmable with QMK and VIA software. To remap keys or create macros:

1. Download the VIA software from the Keychron official webсајту.
2. Connect the K10 Pro to your device using the USB-C cable (wired mode is required for remapping).
3. Open the VIA software. The software should automatically detect your keyboard.
4. Drag and drop desired keys or macro commands to remap any key. Changes are saved directly to the keyboard's firmware and will work in both wired and wireless modes.

Image: A screenshot of the VIA software interface, demonstrating its drag-and-drop functionality for key customization.

Контрола позадинског осветљења:

The K10 Pro features 14 types of white backlight effects. Use the dedicated backlight key (usually located near the function row) or a combination of 'Fn' and other keys (refer to the keyboard's keycap legends) to cycle through effects and adjust brightness.

Слика: Крупни план view of the keyboard's switches illuminated by the white backlight.

Adjustable Typing Angle:

The keyboard features two-stage adjustable feet, allowing for three different typing angles: 5°, 9.2°, and 12°. Adjust the feet to find your preferred ergonomic position.

Слика: Детаљна view of the keyboard's adjustable feet, illustrating the different height settings.

Одржавање

Чишћење тастатуре:

Да бисте одржали оптималне перформансе и изглед, редовно чистите тастатуру:

• Искључите тастатуру из рачунара.
• Користите бочицу компримованог ваздуха да бисте уклонили прашину и остатке између тастера.
• Wipe the keycaps and case with a soft, damp тканина. Избегавајте употребу јаких хемикалија или абразивних материјала.
• For deeper cleaning, keycaps can be removed using a keycap puller.

Замена тастера и прекидача:

The K10 Pro features hot-swappable switches, allowing you to change switches without soldering. The double-shot PBT keycaps are also durable and can be replaced if desired.

• Уклањање тастера: Use a keycap puller to gently lift keycaps straight up.
• Уклањање прекидача: Use a switch puller to carefully remove the switch from the PCB. Ensure the keyboard is disconnected before attempting this.
• Installing Switches/Keycaps: Align the new switch/keycap with the socket/stem and press down gently until it clicks into place.

Слика: Крупни план view of the mechanical switches, showing their construction and hot-swappable nature.

Image: A detailed shot of the double-shot PBT keycaps, highlighting their texture and durability.

Решавање проблема

Проблеми са повезивањем:

• Блуетоотх се не повезује: Ensure the keyboard is in Bluetooth mode and in pairing mode (Fn + 1/2/3 for 4 seconds). Check your device's Bluetooth settings and try re-pairing.
• Wired connection not working: Ensure the mode switch is set to 'Cable' and the USB-C cable is securely connected to both the keyboard and your computer. Try a different USB port or cable.

Key Remapping Not Applying:

• Remember that key remapping via VIA software requires the keyboard to be connected in жични режим during the remapping process. Once remapped, the changes will apply to both wired and wireless modes.
• Ensure you have the correct firmware and VIA JSON file loaded for your specific K10 Pro model.

Позадинско осветљење не ради:

• Check if the backlight is simply turned off or set to the lowest brightness. Use the backlight control keys to adjust.
• Уверите се да је батерија тастатуре довољно напуњена.

Спецификације

Image: Detailed specifications for the Keychron K Pro Red (Linear) switch, including operating force, pre-travel, and total travel distance.

Гаранција и подршка

For warranty information, technical support, and frequently asked questions, please visit the official Keychron website. You can also find updated drivers and VIA software downloads there.

Official Keychron Webсајт: ввв.кеицһрон.цом