WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter

1. Увод

This manual provides essential information for the safe and efficient operation of your WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Безбедносна упутства

• Прочитајте сва упутства: Before operating the inverter, read all instructions and cautionary markings on the inverter, the batteries, and all appropriate sections of this manual.
• Квалификовано особље: Инсталацију и одржавање треба да обавља само квалификовано особље.
• вентилација: Ensure adequate ventilation around the inverter. Do not install in a zero-clearance compartment.
• Избегавајте влагу: Do not expose the inverter to rain, snow, spray, or bilge water.
• Proper Battery Connection: Connect the inverter to a 24V battery system only. Incorrect voltage can damage the inverter.
• уземљење: Ensure the inverter is properly grounded to prevent electrical shock.
• Искључивање у случају нужде: Know how to quickly disconnect power in an emergency.

3. Садржај пакета

Након отварања паковања, проверите да ли су све компоненте присутне и да ли су оштећене:

• WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter
• DC Connection Cables (AWG5 cables, typically 2 black for negative, 2 red for positive)
• Осигурачи
• Упутство за употребу

4. Производ је готовview

The WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter converts 24V DC battery power to 120V/240V AC power. It features a high efficiency design, an LCD display for monitoring, and multiple protection functions.

4.1. Front Panel (AC Output)

слика: Front panel of the inverter with two 120V AC outlets and hardwire terminals for 120V and 240V output.

• 120VAC Outlets: Two standard 120V AC outlets, each supporting up to 5000W.
• 240VAC Hardwire Terminal (3-wire): For 240V AC output, up to 10KW max (L+N=240V).
• Multi-mode Hardwire Terminal (4-wire): Supports L1+L2=240V, L1+N=120V, L2+N=120V, allowing simultaneous 120VAC and 240VAC output.
• Прекидач: To turn the AC output on or off.
• Ground Wire Connector: За безбедносно уземљење.

4.2. Rear Panel (DC Input)

слика: Rear panel of the inverter, featuring positive and negative DC input terminals and cooling fans.

• Позитиван (+) терминал: Red terminal for positive battery connection.
• Негативни (-) терминал: Black terminal for negative battery connection.
• Вентилатори за хлађење: Temperature-controlled fans for efficient heat dissipation.
• Spark-Proof Nut: Designed to minimize sparks during connection.

4.3. ЛЦД екран

слика: LCD display showing various operational parameters of the inverter.

The LCD display provides real-time monitoring of the inverter's status:

1. Inverter working status (Normal/Fault)
2. Working temperature inside the inverter
3. Баттери волtagе и капацитет
4. AC1 120V voltagе и ampераге
5. AC2 120V voltagе и ampераге
6. Output of 240V and frequency (60Hz)

5. Инсталација

5.1. DC Battery Connection (24V System)

The inverter requires a 24V DC battery system. For a 24V system using two 12V batteries, connect them in series (positive of one battery to negative of the other). Ensure the battery bank is properly sized for your power needs.

слика: Step-by-step guide for connecting DC cables to the inverter, emphasizing spark-proof connection.

1. Connect Negative Cable First: After connecting the black cable(s) to the battery's negative terminal, connect the other end of the black cable(s) to the inverter's negative terminal.
2. Contact Spark-Proof Terminal: Briefly touch the spark-proof terminal with the positive cable for 3-5 seconds to discharge any residual capacitance.
3. Connect Positive Cable: Connect the red cable(s) to the battery's positive terminal, then connect the other end to the inverter's positive terminal.

Важно: Use all provided cables. For 4 cables, use 2 black for negative and 2 red for positive. Ensure all connections are tight to maintain stable current flow.

5.2. AC Output Wiring

The inverter supports both 120V and 240V AC output. You can use the standard 120V outlets or the hardwire terminals for direct connection to your electrical panel.

слика: Детаљно view of the AC output terminals, including L1, N, L2, and G (Ground) connections.

For hardwire connections:

• L1 to Hot 1
• L2 to Hot 2
• N to Neutral
• Г до земље

The inverter can run 120V and 240V appliances simultaneously. Ensure the total amperage does not exceed 25A for the connection.

6. Операција

Once the inverter is properly installed and connected to the battery bank, press the power switch on the front panel to turn it on. The LCD display will illuminate, showing the current operational status.

6.1. Повезивање уређаја

Plug your 120V AC appliances into the standard outlets or connect 120V/240V appliances to the hardwire terminals. Ensure the total wattage of connected appliances does not exceed the inverter's continuous power rating of 10000W.

The inverter is compatible with a wide range of appliances, including those for home, cabin, mobile business, RV, trailer, semi-truck, and boat use. It supports AGM, gel, flooded, lead-acid, and lithium-ion batteries.

7. Заштитне карактеристике

The WZRELB inverter is equipped with multiple protection features to ensure safe and reliable operation:

• Temperature-Controlled Cooling Fan: Activates automatically to prevent overheating.
• Лов Волtagе Аларм/Искључење: Protects batteries from over-discharge.
• Хигх Волtagе Аларм/Искључење: Protects the inverter and connected devices from over-voltage.
• Заштита од преоптерећења: Shuts down if connected load exceeds capacity.
• Заштита од кратког споја: Спречава оштећења од кратких спојева.
• Заштита од прекомерне температуре: Shuts down if internal temperature becomes too high.
• Internally Fused: Provides additional circuit protection.
• Заштита од обрнутог поларитета батерије: Guards against incorrect battery connections.

слика: Готовоview of the inverter highlighting its robust protection features.

8. Спецификације

9. Одржавање

• Редовно чишћење: Одржавајте инвертор чистим и без прашине и остатака. Користите суву крпу за чишћење.
• Проверите везе: Периодично проверавајте све једносмерне и наизменичне везе како бисте се уверили да су чврсте и без корозије.
• вентилација: Ensure cooling fans are not obstructed and operate freely.
• Здравље батерије: Monitor your battery bank's health and charge levels regularly to prolong their lifespan and ensure optimal inverter performance.

КСНУМКС. Решавање проблема

If you encounter issues with your inverter, refer to the LCD display for error codes or status messages. Common issues and basic troubleshooting steps include:

• Нема излазне снаге: Check battery connections, ensure the inverter is turned on, and verify battery voltage is within the operating range. Check for tripped circuit breakers or blown fuses.
• Искључивање преоптерећења: Reduce the load connected to the inverter. Ensure the total wattage of appliances does not exceed the inverter's capacity.
• Ниска/Висока Волtagе Искључивање: Проверите запремину батеријеtage. If low, recharge batteries. If high, check charging system.
• Искључивање преко температуре: Ensure adequate ventilation around the inverter. Clear any obstructions from the cooling fans. Allow the inverter to cool down.
• Кратак спој: Disconnect all loads and check for any short circuits in your wiring or appliances.

За сталне проблеме, контактирајте корисничку подршку.

11. Гаранција

The WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter comes with a 1 година гаранције from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, improper installation, accidents, or unauthorized modifications.

Сачувајте доказ о куповини за гаранцијске захтеве.

12. Корисничка подршка

For technical assistance, warranty claims, or any questions regarding your WZRELB inverter, please contact WZRELB customer support through the retailer where you purchased the product or visit the official WZRELB webсајт за контакт информације.