Lindby Ilana Outdoor Wall Lamp with Motion Detector - Instruction Manual

1. Производ је готовview

The Lindby Ilana is an outdoor wall lamp designed for reliable and efficient illumination of exterior spaces. It features a durable black stainless steel frame and transparent glass panels, housing an E27 lamp holder. An integrated motion detector enhances security and energy efficiency by automatically activating the light upon detecting movement. With an IP44 protection rating, this lamp is suitable for outdoor use, offering protection against splashing water and solid objects larger than 1mm.

Figure 1: Lindby Ilana outdoor wall lamp in an illuminated state.

2. Безбедносна упутства

Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• електрична безбедност: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the main power supply is switched off before commencing any installation or maintenance work.
• Употреба на отвореном: This product is rated IP44, providing protection against splashing water. However, avoid direct high-pressure water jets.
• Тип сијалице: Користите само Е27 сијалице са максималном снагомtage of 15W LED. Do not exceed the specified wattage.
• Руковање: Пажљиво рукујте стакленим компонентама како бисте спречили ломљење.
• Чишћење: Искључите напајање пре чишћења. Користите меку,amp крпа; не користите абразивна средства за чишћење.

3. Садржај пакета

Пре инсталације, проверите да ли су све компоненте присутне и да нису оштећене:

• 1 x Lindby Ilana Outdoor Wall Lamp Јединица
• 1 к Монтажна плоча
• 1 x Set of Screws and Wall Plugs for installation
• 1 x Упутство за употребу (овај документ)

Figure 2: Main components of the Lindby Ilana lamp.

4. Подешавање и инсталација

4.1 Монтажа Лamp

1. Припремите простор за инсталацију: Choose a suitable outdoor location on a wall. Ensure the surface is stable and can support the lamp's weight.
2. Означите тачке бушења: Detach the mounting plate from the lamp unit. Hold the mounting plate against the wall at the desired installation height and mark the drilling points through the plate's holes.
3. Избушене рупе: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
4. Сигурна монтажна плоча: Fasten the mounting plate to the wall using the provided screws. Ensure it is securely attached.

Слика 3: Лamp dimensions for installation planning.

4.2 Električno ožičenje

УПОЗОРЕЊЕ: Electrical installation should only be carried out by a qualified electrician. Ensure the main power supply is disconnected before wiring.

1. Повежите жице: Connect the household electrical wires to the terminal block inside the lamp unit. Typically, this involves connecting the live (brown/black), neutral (blue), and earth (green/yellow) wires to their corresponding terminals.
2. Сигурно ожичење: Ensure all connections are tight and secure. Use appropriate cable glands to maintain the IP44 rating.

4.3 Bulb Installation

1. Уметните сијалицу: Carefully screw an E27 bulb (max 15W LED) into the lamp држач.
2. Close Lamp Јединица: Причврстите лamp unit to the secured mounting plate, ensuring it is properly sealed to maintain its weather resistance.
3. Врати снагу: Once installation is complete and secure, restore power at the main circuit breaker.

5. Упутство за употребу

5.1 Motion Sensor Functionality

The Lindby Ilana lamp is equipped with an integrated motion detector. Once power is supplied, the sensor will automatically detect movement within its detection range and activate the light. The light will remain on for a preset duration (typically adjustable, refer to specific sensor instructions if provided separately) and then turn off if no further movement is detected.

Figure 4: Detail of the integrated motion sensor.

5.2 Рад светла

Тхе лamp operates automatically based on the motion sensor. There is no manual switch on the lamp itself. Ensure the sensor is not obstructed for optimal performance.

6. Одржавање

• Чишћење: За чишћење лamp, first disconnect the power supply. Use a soft, dry or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish or glass.
• Замена сијалице: Ensure the power is off before replacing the bulb. Unscrew the old E27 bulb and replace it with a new E27 bulb, not exceeding 15W LED.
• инспекција: Повремено прегледајте лamp for any signs of wear, damage, or loose connections. If any issues are found, consult a qualified electrician.

КСНУМКС. Решавање проблема

If you encounter issues with your Lindby Ilana lamp, погледајте следећу табелу:

8. Спецификације

9. Гаранција и подршка

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact Lindby customer support or your authorized dealer.

For further information or to register your product, please visit the official Lindby webсајт: www.lindby.com