RunCam Spotter V2 FPV Camera and Transmitter Kit User Manual

1. Увод

The RunCam Spotter V2 Micro FPV AIO Camera is an integrated camera and video transmitter (VTX) system designed for First Person View (FPV) applications in various remote-controlled vehicles such as RC cars, planes, boats, and drones. This compact unit provides a 700TVL camera with a 170-degree field of view, a 5.8GHz 40-channel adjustable power VTX (20mW-200mW), an integrated microphone, and an On-Screen Display (OSD) for real-time data.

This manual provides essential information for the proper setup, operation, and maintenance of your Spotter V2 FPV Camera and Transmitter Kit.

2. Садржај пакета

Молимо вас да проверите да ли су све ставке наведене у наставку укључене у ваш пакет:

• 1x Spotter V2 Micro FPV AIO Camera (with Cloverleaf antenna)
• 1x XT-60 Power Cable
• 1x Double Sided Tape (one side is Velcro)
• 1x Spare Whip Antenna
• 1x Упутство за употребу (овај документ)

3. Спецификације

Image: Dimensions of the RunCam Spotter V2 FPV Camera, showing length, width, and height measurements in millimeters.

Image: Illustration of the 170-degree wide-angle lens of the Spotter V2 camera, demonstrating its expansive field of view over a landscape.

4. Подешавање

4.1 Монтирање камере

The Spotter V2 camera is designed to be compact and lightweight, making it suitable for various RC vehicles. Use the provided double-sided tape (Velcro on one side) to securely mount the camera to your RC car, plane, boat, or drone. Ensure the camera has a clear line of sight for optimal FPV experience.

Image: A hand holding the compact RunCam Spotter V2 FPV camera, demonstrating its small size relative to a US quarter coin.

Image: The Spotter V2 FPV camera mounted on top of an RC car, demonstrating a typical installation scenario.

4.2 Прикључак за напајање

Connect the provided XT-60 power cable to the camera's power input. The camera supports a 2S-4S LiPo battery (7.4V-14.8V). Ensure correct polarity when connecting the power source to avoid damage to the unit.

The camera's wiring typically consists of:

• Црвена жица: Positive (+) power input
• Црна жица: Negative (-) power input (Ground)
• жута жица: Video Out (if applicable, though this is AIO, so video is transmitted wirelessly)

For direct power, connect the red and black wires to your vehicle's battery or a suitable power distribution board within the specified voltagе ранге.

4.3 Инсталација антене

The Spotter V2 comes with a pre-installed Cloverleaf antenna. A spare Whip antenna is also included. If the Cloverleaf antenna becomes damaged, you can solder the Whip antenna in its place. Ensure the antenna is securely attached and positioned to minimize obstruction for best signal transmission.

5. Упутство за употребу

5.1 Powering On and Initial Check

Once the camera is mounted and powered correctly, connect your FPV goggles or monitor. The camera will power on automatically with your vehicle's power system. You should see the FPV feed on your display device.

Image: The Spotter V2 FPV camera positioned next to an FPV monitor, illustrating the live video feed capability.

Image: The Spotter V2 FPV camera shown with an FPV monitor and goggles, highlighting its broad compatibility with analog FPV receiving equipment.

5.2 Channel and Power Adjustment

The Spotter V2 features a button for frequency adjustment. Refer to the markings on the camera unit for the exact location of the "PRESS" button. Short presses typically cycle through channels, while long presses may cycle through bands or power levels. Consult the on-screen display (OSD) for current channel, band, and power settings.

• Кратки притисак: Change channel within the current band.
• Дуго притисните: Change band or adjust VTX power (20mW, 200mW).

Ensure your FPV receiver (goggles/monitor) is set to the same band and channel as the Spotter V2 for a clear video feed.

Image: The Spotter V2 FPV camera with its antenna, depicted with signal waves, representing its multi-mode capabilities including adjustable power and multiple channels.

5.3 Екрански мени (OSD)

The integrated OSD provides real-time information directly on your FPV feed. This may include battery voltage, current channel/band, and other critical flight data. This feature helps in monitoring the system status during operation.

5.4 Интегрисани микрофон

The Spotter V2 includes an integrated microphone, allowing you to hear ambient sounds from your RC vehicle. This enhances the immersive FPV experience. Ensure your FPV receiver supports audio reception.

6. Одржавање

• Чишћење: Keep the camera lens clean using a soft, dry cloth. Avoid abrasive materials or harsh chemicals.
• Брига о антени: Ensure the antenna is not bent or damaged. A damaged antenna can significantly reduce transmission range and video quality. Use the spare whip antenna if the primary antenna is compromised.
• Складиштење: Чувајте камеру на сувом и хладном месту, даље од директне сунчеве светлости и екстремних температура.
• Снага: Always disconnect power when not in use to prevent battery drain and potential damage.

КСНУМКС. Решавање проблема

8. Гаранција и подршка

The RunCam Spotter V2 FPV Camera and Transmitter Kit comes with a standard manufacturer's warranty. For specific warranty details and duration, please refer to the documentation provided at the time of purchase or contact RunCam customer support directly.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please visit the official RunCam webсајт или контактирајте њихову службу за кориснике. Сачувајте рачун као доказ о куповини.

Произвођач: РунЦам

Webсајт: ввв.рунцам.цом (This is a placeholder link, please verify the official webсајт за подршку.)