Anykit AN430D8DL3

Упутство за употребу Anykit бороскопске инспекцијске камере AN430D8DL3

Comprehensive instructions for setup, operation, and maintenance of your Anykit Industrial Endoscope Camera with 4.3" HD Screen.

1. Увод

This manual provides detailed instructions for the safe and effective use of your Anykit Borescope Inspection Camera, model AN430D8DL3. This industrial endoscope is designed for visual inspection in hard-to-reach areas such as pipes, engines, and wall interiors. It features a 4.3-inch HD screen, a waterproof probe, and a semi-rigid cable for versatile applications.

Important Note: This endoscope is for viewing only and does not support taking pictures or videos.

2. Безбедносне информације

  • Не користите уређај у окружењима са запаљивим или експлозивним гасовима.
  • Држите уређај даље од јаких електромагнетних поља.
  • Уверите се да је уређај потпуно напуњен пре употребе како бисте избегли прекиде током инспекције.
  • Не покушавајте да растављате или модификујете уређај. Сва сервисирања препустите квалификованом особљу.
  • The camera probe is waterproof (IP67 rated), but the main display unit is not. Avoid exposing the display unit to water or moisture.
  • Avoid bending the semi-rigid cable excessively or sharply, as this may damage internal wiring.
  • Чувајте уређај на хладном и сувом месту када се не користи.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

  • Anykit Borescope Inspection Camera (Main Unit with 4.3" HD Screen and integrated 10 ft semi-rigid cable)
  • УСБ кабл за пуњење
  • Accessory Kit (Mirror, Hook, Magnet attachments)
  • Упутство за употребу
Anykit Borescope Inspection Camera package contents
Image: Contents of the Anykit Borescope Inspection Camera package, including the main unit, coiled cable, USB charging cable, accessory attachments, and user manual.
Borescope camera attachments: mirror, hook, and magnet
Image: Close-up of the accessory attachments: a mirror for side viewing, a hook for retrieving objects, and a magnet for metallic items. These attach to the camera probe tip.

4. Производ је готовview

The Anykit Borescope Inspection Camera is a self-contained unit designed for immediate use without external devices or software. It features a high-definition display and a flexible probe with adjustable lighting.

Anykit Borescope Inspection Camera main unit and coiled cable
Image: The main Anykit Borescope unit with its 4.3-inch screen displaying an engine component, connected to the coiled semi-rigid inspection cable with its illuminated camera tip.
Diagram of the 8.0mm camera lens and 6 LED lights
Слика: Експлодирана view diagram illustrating the internal components of the 8.0mm camera lens and the arrangement of 6 LED lights for clearer imaging.
4.3 inch HD IPS screen features
Image: A close-up of the 4.3-inch HD IPS screen, highlighting its anti-scratch, anti-dust, and vivid color display capabilities, with a comparison to a less clear screen.
8.0mm inspection camera probe with adjustable LEDs and IP67 rating
Image: The 8.0mm inspection camera probe, showing its 6 adjustable LED lights and emphasizing its IP67 waterproof rating, suitable for wet environments.

Кључне компоненте:

  • 4.3" HD IPS Screen: Provides clear, real-time inspection views.
  • Camera Probe (0.3" / 8.0mm diameter): Small enough to access tight spaces.
  • 6 подесивих ЛЕД светла: Illuminates dark inspection areas with 3 brightness levels.
  • 10 ft Semi-Rigid Cable: Maintains its shape for precise maneuvering.
  • Уграђена пуњива батерија од 2000mAh: Offers up to 3 hours of continuous operation.
  • ИП67 водоотпорна оцена: The camera probe is protected against dust and temporary immersion in water.
  • Ротација слике од 180°: Adjust the image orientation on the screen.
  • 1.2-3.1" Focal Range: Оптимално viewing distance for clear images.

Контроле и портови:

Anykit Borescope Inspection Camera controls and ports diagram
Image: Diagram showing the layout of controls and ports on the Anykit Borescope main unit. Labels include Charging Port, Charging Indicator, Reset button, Power Button, Zoom button, and Flips/Normal (image rotation) button.
  • Дугме за напајање: Укључује/искључује уређај.
  • Light Adjustment Button: Cycles through 3 brightness levels for the camera LEDs.
  • Дугме за зумирање: Увећава слику на екрану.
  • Image Rotation Button: Flips the image 180 degrees.
  • Порт за пуњење: USB port for charging the internal battery.
  • Индикатор пуњења: ЛЕД светло које показује статус пуњења.
  • Дугме за ресетовање: За фабричко ресетовање ако је потребно.

5. Подешавање

  1. Напуните уређај: Before first use, fully charge the borescope using the provided USB cable and a standard USB power adapter (not included). The charging indicator will show charging status. A full charge typically takes a few hours.
  2. Причврстите додатну опрему (опционо): If needed, carefully attach the mirror, hook, or magnet to the tip of the camera probe. Ensure it is securely fastened.
  3. Укључено: Press and hold the Power Button until the screen illuminates. The device is ready for immediate use.
Anykit Borescope Inspection Camera held in hand, ready to use
Image: A hand holding the Anykit Borescope, demonstrating its compact size and readiness for use. The screen displays a live image from the camera probe.

6. Упутство за употребу

  1. Убаците сонду: Carefully guide the semi-rigid camera cable into the area you wish to inspect. The cable's flexibility allows it to navigate around obstacles, while its rigidity helps maintain direction.
  2. Подесите осветљење: Press the Light Adjustment Button to cycle through the three brightness levels of the LED lights on the camera probe. Select the optimal brightness for clear visibility in the inspection area.
  3. View на екрану: Observe the live feed on the 4.3-inch HD IPS screen.
  4. Ротирајте слику: If the image orientation is incorrect, press the Image Rotation Button to flip the view 180 степени.
  5. Увећавање/умањивање: Use the Zoom Button to magnify the image for closer inspection of details.
  6. Maneuver the Probe: Gently manipulate the cable to navigate the camera to different angles and depths. The 1.2-3.1 inch focal range provides the best clarity within this distance.
  7. Retrieve Objects (with attachments): If using the hook or magnet, carefully maneuver the probe to engage with the desired object for retrieval.
  8. Искључивање: After inspection, press and hold the Power Button to turn off the device.

Сценарији примене:

Anykit Borescope Inspection Camera used in various scenarios
Слика: Три бившаamples of the borescope in use: inspecting an engine compartment, examining an HVAC duct, and checking plumbing under a sink.
  • Аутомобили: Inspect engine cylinders, valves, gears, and other internal components.
  • Home Inspection: Examine pipes, drains, wall cavities, and HVAC ducts for blockages, damage, or pests.
  • Индустријска употреба: Inspect machinery, equipment, and structural elements in manufacturing or construction.

7. Одржавање

  • Чишћење сонде: Након сваке употребе, посебно у прљавом или влажном окружењу, нежно обришите сонду камере и кабл меком,amp тканина. Немојте користити абразивна средства за чишћење или раствараче.
  • Чишћење јединице за приказ: Use a dry, soft cloth to clean the display screen and main unit. Avoid spraying liquids directly onto the unit.
  • Складиштење: Coil the semi-rigid cable loosely and store the device in its original packaging or a protective case to prevent damage. Keep it in a dry place away from extreme temperatures.
  • Одржавање батерије: To prolong battery life, charge the device regularly, even if not in frequent use. Avoid completely draining the battery before recharging.

КСНУМКС. Решавање проблема

Проблем Могући узрок Решење
Уређај се не укључује. Ниска батерија. Потпуно напуните уређај помоћу УСБ кабла.
Нема слике на екрану. Camera cable not properly connected (if detachable model, though this is integrated). Internal issue. Ensure the device is powered on. If problem persists, try resetting the device. If still no image, contact support.
Слика је мутна или нејасна. Incorrect focal distance. Insufficient lighting. Dirty camera lens. Adjust the distance between the camera and the object (optimal 1.2-3.1 inches). Increase LED brightness. Clean the camera lens with a soft cloth.
ЛЕД светла не раде. Lights turned off or set to lowest brightness. Press the Light Adjustment Button to cycle through brightness levels.
Уређај се замрзава или престаје да реагује. Софтверски квар. Press the Reset button (if available) or power off and restart the device.

9. Спецификације

Феатуре Детаљ
Број модела AN430D8DL3
Величина екрана 4.3 inches IPS HD
Пречник сонде камере 0.3 инча (8.0 мм)
Цабле Ленгтх 10 стопа (3 метра)
Цабле Типе Полу крута
Водоотпорна оцена IP67 (for camera probe only)
ЛЕД светла 6 подесива нивоа осветљености
Жаришни распон 1.2 - 3.1 инча (3 цм - 8 цм)
Капацитет батерије 2000мАх литијум-јонски
Оперативно време До 3 сати (приближно)
Димензије производа 6 x 2 x 3 инча (главна јединица)
Тежина артикла 12.31 унци

10. Гаранција и подршка

Anykit products are designed for reliability and performance. For warranty information and technical support, please refer to the warranty card included in your product package or visit the official Anykit website. Please have your model number (AN430D8DL3) and purchase date ready when contacting support.

For further assistance, you may contact Anykit customer service through their official channels.